Instruction/ maintenance manual of the product RRM310P Oregon Scientific
Go to page of 8
1 EN Radio-Controlled Projection Clock with FM Radio Model: RRM310P USER MANUAL CONTENTS Contents................................................................ 1 Introduction........................................................... 2 Product Overview .
2 EN INTRODUCTION Thank you for selecting the Oregon Scientic™ projection clock with FM radio. Keep this manual handy as you use your new product. It contains practical step-by-step instructions, as well as technical specications and warnings you should know .
3 EN LCD DISPLA Y 9. RESET : Press to return all values to the default settings 10. : Switch radio on or off 1 1. : T oggle through preset radio stations 12. : Increase or decrease volume 13. FM radio antenna wire 1. Time 2. 24 / 12 hr format 3. Calendar / alarm display 4.
4 EN CLOCK RECEPTION This product is designed to synchronize its calendar clock automatically once it is brought within 1500km (932 miles) of a radio signal (DCF-77 generated from Frankfurt, Germany). NOTE For best results, place the clock away from metal or electrical objects, and near a window with a clear view to the sky .
5 EN T o scroll through preset stations: Press repeatedly . SLEEP The radio is equipped with a countdown sleep timer that can be set to switch the radio off after up to 120 minutes. 1. Press to enter sleep mode. 2. Press to change the sleep time setting (120, 90, 60, 45, 30, 15, 0).
6 EN • Press the SNOOZE / LIGHT button to project the time and alarm status for 8 seconds. • Press the SNOOZE / LIGHT twice to ip the projection image by 180 degrees RESET Insert a thin blunt instrument into the RESET hole to return to the default settings.
7 EN Radio-controlled clock DCF77 Clock Frequency System Auto or disabled Synchronization 87.5-108.0 MHz FM Band Range HH:MM:SS HH:MM: Day of week HH:MM: T ime zone hour offset Clock 12hr / 24 hr format Hour Format DD / MM or MM / DD, user selectable.
8 EN EU-DECLARA TION OF CONFORMITY H e r e b y, O r e g o n S c i e n t i f i c , d e c l a r e s t h a t t h i s Radio-Controlled Projection Clock with FM Radio (Model RRM310P) is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
An important point after buying a device Oregon Scientific RRM310P (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oregon Scientific RRM310P yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oregon Scientific RRM310P - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oregon Scientific RRM310P you will learn all the available features of the product, as well as information on its operation. The information that you get Oregon Scientific RRM310P will certainly help you make a decision on the purchase.
If you already are a holder of Oregon Scientific RRM310P, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oregon Scientific RRM310P.
However, one of the most important roles played by the user manual is to help in solving problems with Oregon Scientific RRM310P. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oregon Scientific RRM310P along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
