Instruction/ maintenance manual of the product RMR802A Oregon Scientific
Go to page of 10
E N 1 Solar Clock with Indoor / Outdoor T emperature Model:RMR802 / RMR802A USER MANUAL CONTENTS Overview ..................................................................... 2 Front View ..............................................................
E N 2 OVERVIEW FRONT VIEW 2 1 3 7 9 10 8 1 1 4 5 6 1. Solar panel 2. Remote sensor reception indicator 3. Clock signal reception indicator 4. Indoor temperature 5. MODE : Change settings / display 6. / : Increase / decrease value; activate / deactivate clock reception signal; : toggle between outdoor channels (1-3) 7.
E N 3 1. RESET : Reset unit to default settings 2. EU / UK : Select the nearest radio signal (RMR802 only) 3. °C / °F : Select temperature unit REMOTE SENSOR 1 2 3 4 5 1. LED status indicator 2. Wall mount hole 3. Battery compartment 4. RESET hole 5.
E N 4 1.5 m (5 ft) NO TE Use alkaline batteries for longer usage and consumer grade lithium batteries in temperatures below freezing. SENSOR DATA TRANSMISSION T o search for a sensor: Press and hold + MODE . The sensor reception icon in the remote sensor area shows the status: ICON DESCRIPTION Main unit is searching for sensor(s).
E N 5 RMR802A: • WWVB-60 signal: within 3200km (2000 miles) of Fort Collins Colorado. To enable / disable signal reception: Press and hold to enable or to disable signal reception. NOTE Reception takes 2-10 minutes. If the signal is weak, it can take up to 24 hours to get a valid signal .
E N 6 ICE WARNING If the sensor falls between 3°C to -2 °C (37°F to 28°F), the green LED indicator will flash, and will stop flashing once the temperature is out of this range. NOT E As ice alert is only applicable to channel 1, to prevent flashing of LED, select channel 2 or 3 on outdoor sensor .
E N 7 SPECIFICATIONS TYPE DESCRIPTION MAIN UNIT L x W x H 75 x 33 x 120 mm (2.95 x 1.30 x 4.72 in) Weight 1 12 g (3.95 oz) without battery T emperature range -5°C to 50°C (23°F to 122°F) Signal frequency 433 MHz Power 2 x UM-4 (AAA) 1.5 V batteries REMOTE UNIT (THN132N) L x W x H 96 x 50 x 22 mm (3.
E N 8 FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
E N 9 © 2009 Oregon Scientific. All rights reserved. P/N: 300102249-00001-10.
E N 10 Solar Clock with Indoor / Outdoor Temperature Model:RMR802 / RMR802A USER MANUAL.
An important point after buying a device Oregon Scientific RMR802A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oregon Scientific RMR802A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oregon Scientific RMR802A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oregon Scientific RMR802A you will learn all the available features of the product, as well as information on its operation. The information that you get Oregon Scientific RMR802A will certainly help you make a decision on the purchase.
If you already are a holder of Oregon Scientific RMR802A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oregon Scientific RMR802A.
However, one of the most important roles played by the user manual is to help in solving problems with Oregon Scientific RMR802A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oregon Scientific RMR802A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
