Instruction/ maintenance manual of the product RMR391PA Oregon Scientific
Go to page of 9
1 EN Slim Projection Clock with Indoor/ Outdoor Temperature Model: RMR391P / RMR391PA / RMR391PU USER MANUAL CONTENTS Overview .................................................................. 2 Front view ............................................
2 EN OVERVIEW FRONT VIEW 1 6 7 8 9 10 1 1 5 3 4 2 1. SNOOZE / LIGHT : activate snooze alarm; turn on backlight / projector; flip projected image 180º 2. Projector 3. : clock signal reception indicator 4. : adapter disconnected 5. : alarm time is displayed 6.
3 EN BOTTOM VIEW 1 2 1. Adapter socket 2. Battery compartment REMOTE SENSOR 1. LED status indicator 2. Wall mount hole 3. Battery compartment 4. RESET hole: Reset unit to default settings 5. CHANNEL switch: Select channel 1 GETTING STARTED POWER SUPPLY 2 x CR2032 batteries To insert batteries: 1.
4 EN REMOTE SENSOR To set up the remote sensor: 1. Slide open the battery compartment. 2. Slide channel switch to select channel 1. 3. Insert the battery, matching the polarities. 4. Press RESET after each battery change. 5. Close the battery compartment.
5 EN CLOCK CLOCK RECEPTION This product is designed to synchronize its clock automatically with a clock signal. RMR391P : EU: DCF-77 signal: within 1500 km (932 miles) of Frankfurt, Germany. RMR391PU : UK: MSF-60 signal: within 1500 km (932 miles) of Anthorn, England.
6 EN To toggle alarms ON / OFF: 1. Press to display alarm time. 2. Press again to turn alarm ON / OFF. To silence the alarm: • Touch SNOOZE / LIGHT to silence it for 8 minutes OR • Press any other key to turn the alarm off and activate it again after 24 hours.
7 EN To activate continuous backlight: • Slide BACKLIGHT switch to HI / LO. For a brighter display, select HI. For a dimmer display, select LO. To deactivate continuous backlight: • Slide BACKLIGHT switch to OFF. (Touch SNOOZE/ LIGHT to turn backlight on for 5 seconds).
8 EN SPECIFICATIONS TYPE DESCRIPTION MAIN UNIT L x W x H 175 x 80 x 18 mm (6.9 x 3.2 x 0.7 in) Weight 240 g (8.47 oz) without battery Temperature Unit °C / °F Temperature range -20°C to 60°C Signal frequency 433 MHz Power 2 x CR2032 batteries / 3V adapter REMOTE UNIT (THN132N) L x W x H 92 x 60 x 20 mm (3.
9 EN FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
An important point after buying a device Oregon Scientific RMR391PA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oregon Scientific RMR391PA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oregon Scientific RMR391PA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oregon Scientific RMR391PA you will learn all the available features of the product, as well as information on its operation. The information that you get Oregon Scientific RMR391PA will certainly help you make a decision on the purchase.
If you already are a holder of Oregon Scientific RMR391PA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oregon Scientific RMR391PA.
However, one of the most important roles played by the user manual is to help in solving problems with Oregon Scientific RMR391PA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oregon Scientific RMR391PA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
