Instruction/ maintenance manual of the product RM818P Oregon Scientific
Go to page of 23
Cool RF Projection Clock with Animated Projection Model : RM818P User Manual RM818P English Cover R7 OP 7/15/04, 10:16 AM 1.
EN 1 USER MANUAL CONTENTS Introduction .............................................................. 2 Key Features ............................................................ 2 Front View ............................................................
EN 2 NOTE INTRODUCTION Thank you for selecting the Oregon Scientific TM RM818P Cool RF Projection Clock with Animated Projection as your product of choice.
EN 3 FRONT VIEW The Cool RF Projection Clock with Animated Projection features: 1. Projection Unit • The projector can swivel 180 degrees back and to the front. 2. Main LCD Display • Displays current time, date and RF signal reception indicator . 3.
EN 4 1 2 3 4 5 6 7 1. Battery compartment • The unit uses 2 AAA / UM-4 1.5V batteries for power . 2. Adaptor slot 3. Reset hole • Returns all settings to default values. 4. [EU / UK] switch • Slide to select your nearest radio signal base i.e. England or Germany .
EN 5 LCD DISPLA Y SYMBOLS 1. Radio Reception Signal -Indicates the condition of radio reception. 2. Clock Time 3. Alarm 4. Alarm Time 5. Animation speed -Can select fast or slow . 6. Low Battery -Appears when power is low . 7. Time Zone indicator 8. Alarm-on -Appears when alarm is activated.
EN 6 • Do not scratch hard objects against the LCD display as this may cause damage. GETTING ST ARTED UNP ACKING THE PRODUCT When you unpack your product, make sure to keep all the packing materials in a safe place, in case you need to later transport or return it for servicing.
EN 7 1. Locate the battery compartment. 2 . Install the batteries by matching the correct polarity . Always use the correct battery type (2 x UM-4 AAA-sized 1.
EN 8 Even though there are areas that may have more difficulty in receiving a signal, the Radio-controlled / RF clock contains accurate quartz movement and will retain precise timing if the signal is missed on a rare occasion. Reception can be affected by a number of factors.
EN 9 ENABLING / DISABLING RECEPTION T o manually enable the reception of the RF signal: 1. Press and hold the UP button for 2 seconds until the Radio Reception symbol appears and flashes. T o manually disable the reception of the RF signal: 2. Press and hold the DOWN button for 2 seconds until the Radio Reception symbol disappears.
EN 10 Press the CLOCK button to toggle between the three modes. CLOCK SETTING MODE T o set the time: 1. Press and hold the CLOCK button for more than 2 seconds. 2. Press the CLOCK button two more times. (Use the UP and DOWN buttons to adjust the hour).
EN 11 3. Use the UP and DOWN buttons to select the time format (whether 12-hour to 24-hour format). 4. Press the ALARM button to exit the set mode. TIME FORMA T SETTING MODE T o set the current date: 1. Press and hold the CLOCK button for 2 seconds. 2.
EN 12 DA TE FORMA T SETTING MODE MONTH SETTING MODE YEAR-SETTING MODE The order of the flashing items is: time zone offset, 12 / 24hr format, hour , minute, year , DM< MD, month, day , language, exit clock setting mode.
EN 13 4. Press the CLOCK button once more to exit the set mode. LANGUAGE SETTING MODE Press the ALARM button or the PROJECTION ON button to exit the Clock Setting mode.
EN 14 The three squiggly lines indicate "on" for the optional vibrating wake up device. SETTING THE ALARM TIME Press and hold the Alarm button for 2 seconds to enter the Alarm Setting mode. T o adjust the alarm time, make sure that the alarm time is currently displayed on the LCD screen.
EN 15 3. Adjust the minute of the alarm time by using the UP and DOWN buttons. 4. Press the ALARM button when done. 5. Select the alarm types (sound only; vibration alarm only or both) by using the UP and DOWN buttons. 6. Press the ALARM button when done.
EN 16 If the AC / DC adaptor is plugged, press the PROJECTOR ON and the projector will stay continuously on. Press the PROJECTOR ON button again to deactivate the continuous projection-on function. ANIMA TION SPEED SETTING T o enter to the projector setting mode: 1.
EN 17 T o flip the projected time upside down: 1. Press the SNOOZE / LIGHT button. 2. While the projector is on, press the SNOOZE / LIGHT button again to flip the time.
EN 18 NOTE The vibrating device is powered by two "AA" 1.5V alkaline batteries (included). It is also compatible with rechargeable batteries (not included). THE BACKLIGHT The user can press the SNOOZE / LIGHT button at the base of the unit to enable the backlight function and the backlight will be turned on and last for 5 seconds.
EN 19 Problem: Radio antenna is not displayed on the LCD screen. Symptom: The RF signal cannot be received. Check this: Obstacles (either electromagnetic interference or objects) are barring the signal from reaching the main unit. Remedy: Move the unit away from any sources of interference, including other electronic devices.
EN 20 Alarm Duration: 2 minute Power supply: 2 x UM-4 / AAA 1.5V batteries Operation temperature: -5 ° C to +50 ° C W ARNINGS T o ensure you use your product correctly and safely , read these warnings and the entire user manual before using the product.
EN 21 EC-DECLARA TION OF CONFORMITY This product complies with the essential requirements of Article 3 of the R&TTE 1999 / 5 / EC Directive, if used as intended and the following standards have been applied: Safety of information technology equipment (Article 3.
© 2004 Oregon Scientific. All rights Reserved. P/N.: 086-003536-018 RM818P English Back R7 OP 7/15/04, 10:16 AM 1.
An important point after buying a device Oregon Scientific RM818P (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oregon Scientific RM818P yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oregon Scientific RM818P - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oregon Scientific RM818P you will learn all the available features of the product, as well as information on its operation. The information that you get Oregon Scientific RM818P will certainly help you make a decision on the purchase.
If you already are a holder of Oregon Scientific RM818P, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oregon Scientific RM818P.
However, one of the most important roles played by the user manual is to help in solving problems with Oregon Scientific RM818P. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oregon Scientific RM818P along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
