Instruction/ maintenance manual of the product MR238 Oregon Scientific
Go to page of 9
1 EN CONTENTS Introduction .................................................................................................. 1 Product Overview ........................................................................................ 2 Front View ....
EN 2 PRODUCT OVERVIEW FRONT VIEW 1. ALARM ON/OFF button – activate / deactivate alarm 2. Mirror display 3. VFD display (Vacuum Fluorescent Display) 4. DOWN button - decrease setting / deactivate radio-controlled clock 5. UP button - increase setting / activate radio-controlled clock 6.
3 EN REMOTE SENSOR (RTGR328N) 1. LCD display 2. LED status indicator 3. Ventilation duct REMOTE SENSOR LCD DISPLAY 1. Signal reception 2. Channel number 3. Low battery icon 4. Time 5. Temperature ( ° C or ° F) 6. Humidity % 7. Temperature / Humidity 1 2 3 REMOTE SENSOR – BACK VIEW 1.
EN 4 VFD DISPLAY ACTIVATE / DEACTIVATE THE DISPLAY Slide the VFD control switch at the back of the weather station to different display options: • Display ON – The VFD display and the LED light bars will always be on. • Display OFF – The VFD display and the LED light bars will always be off.
5 EN SENSOR DATA TRANSMISSION Data is sent from the sensor(s) every 60 seconds. The reception icon shown indicates the status. SEARCH FOR SENSOR To search for the sensor, simultaneously press and hold MEMORY and CHANNEL for 2 seconds. NOTE If the sensor is still not found, please check the batteries.
EN 6 TEMPERATURE AND HUMIDITY TREND LINES The trend lines are shown next to the temperature and humidity readings. COMFORT ZONE The Comfort Zone indicates how comfortable the climate is, based on current temperature and humidity measurements. NOTE This information is shown just beside the humidity reading.
7 EN SPECIFICATIONS MAIN UNIT DIMENSIONS L x W x H 330 x 42 x 207 mm (12.99 x 1.65 x 8.15 inches) Weight 1002 grams (2.20 lbs) REMOTE UNIT DIMENSIONS L x W x H 70 x 24.
EN 8 © 2004 Oregon Scientific. All rights reserved. P/N: 086-003642-019.
9 EN Mirror W eather Station Model: MR238 User Manual.
An important point after buying a device Oregon Scientific MR238 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oregon Scientific MR238 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oregon Scientific MR238 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oregon Scientific MR238 you will learn all the available features of the product, as well as information on its operation. The information that you get Oregon Scientific MR238 will certainly help you make a decision on the purchase.
If you already are a holder of Oregon Scientific MR238, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oregon Scientific MR238.
However, one of the most important roles played by the user manual is to help in solving problems with Oregon Scientific MR238. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oregon Scientific MR238 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
