Instruction/ maintenance manual of the product JMR868 Oregon Scientific
Go to page of 13
Jumbo RF W all Clock with Night Sen sor Model: JM R868 / NR868 User M a nual.
EN 1 INTRODUCTION Thank you for selecting the Oregon Scientific TM Jumbo RF Wall Clock with Night Sensor. This device is designed to give you many years of reliable service, including the following co.
2 EN 1 3 2 4 8 9 5 6 7 10 KEY FEA TURES - MAIN UNIT FRONT VIEW / LCD SYMBOLS BACK VIEW 1. Channel 1 / 2 z Ch.1 or Ch.2 will a ppear when the related remote nightlight sensor ha s been activated. 2. Alarm On Icon z Appears when the alarm is enabled. 3.
EN 3 1 2 3 4 5 6 7 8 1 2 3 4 6 7 5 BACK VIEW T ABLE ST AND The wall clock can be placed on a table using the table stand. 1. Rotary Motion Sensor z Detects motion and activates the nightlight and clock backlight in accordance with the settings used. z Twist the knob to direct the sensor to the position you want.
4 EN SAFETY AND CARE SAFETY PRECAUTIONS Plea se observe the following safety precautions when setting up and using this product. z LCD panel - The LCD panel is made of gla ss, and may break if the unit is dropped. z Heat sources - Keep the product away from heat sources, such a s radiators, stove s, heaters, and other heat-generating products.
EN 5 STRONG SIGNAL WEAK SIGNAL Clock: NOTE The nightlight ha s a Power ON / OFF switch to help conserve power . Use the AC a da ptor when using the nightlight for long periods of time.
6 EN Calendar / Clock / Sec Calendar / Clock / Day Calendar / Clock / Offset Time SYMBOL LANGUAGE English German French Italian Spanish CLOCK / CALENDAR CLOCK / CALENDAR DISPLA Y There are 3 types of .
EN 7 ACTIV A TING / DEACTIV A TING THE ALARM T o a ctivate or dea ctivate the alarm: 1. Press the ALARM button. 2. Press the or button. When the alarm icon a ppears on the display , the alarm is activated. When the alarm icon does not a ppear on the display , the alarm is deactivated.
8 EN NOTE When the motion sensor on the nightlight is turned on, it needs a pproximately 2 minute s to warm up before giving a response. ACTIV A TING THE CLOCK BACKLIGHT USING THE CONTROL BUTTON Y ou ca n control the backlight of the clock through the nightlight.
EN 9 TECHNICAL SPECIFICA TIONS TYPE DESCRIPTION Main Unit Dimensions L x W x H 297 x 25 x 165 mm (1 1.69 x 0.98 x 6.5 inches) W eight (without battery) 622 g (1.37 lbs) Remote Unit Dimensions L x W x H 88 x 43 x 1 12 mm (3.46 x 1.69 x 4.41 inches) W eight (without battery) 140 g (0.
10 EN TROUBLESHOOTING PROBLEM SYMPTOM REMEDY Clock time is not correctly set No radio signal reception Place the main unit far away from PCs, phones, and other electronic equipment a nd near a windowsill.
EN 11 ABOUT OREGON SCIENTIFIC Visit our website (www.oregonscientific.com) to learn more about Oregon Scientific products such a s digital ca mera s; MP3 players; children’s electronic learning products a nd ga mes; projection clocks; health a nd fitness gear; weather stations; and digital and conference phones.
2004 Oregon Scienfitic. All rights reserved. P/N: 086-003532-010.
An important point after buying a device Oregon Scientific JMR868 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oregon Scientific JMR868 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oregon Scientific JMR868 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oregon Scientific JMR868 you will learn all the available features of the product, as well as information on its operation. The information that you get Oregon Scientific JMR868 will certainly help you make a decision on the purchase.
If you already are a holder of Oregon Scientific JMR868, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oregon Scientific JMR868.
However, one of the most important roles played by the user manual is to help in solving problems with Oregon Scientific JMR868. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oregon Scientific JMR868 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
