Instruction/ maintenance manual of the product EW98 Oregon Scientific
Go to page of 2
C8315A Size: A4 OVERVIEW RECEIVER 1.Projector: • Use it to project the time and temperature. 2.SNOOZE/LIGHT key: • In normal time mode, press it once to turn on the backlight for 5 seconds. • Press it to silence the current alarm when it is going and enter the snooze mode for 8 minutes.
Note 1. During the setting period, press and hold “ +/ CHANNEL ” or “ -/MIN.MAX. ” key to speed up the change of settings . 2. The time zone indicators are abbreviated as below: P=Pacific, M=Mountain, C=Central, E=Eastern. ALARM TIME SETTING 1.
An important point after buying a device Oregon Scientific EW98 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oregon Scientific EW98 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oregon Scientific EW98 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oregon Scientific EW98 you will learn all the available features of the product, as well as information on its operation. The information that you get Oregon Scientific EW98 will certainly help you make a decision on the purchase.
If you already are a holder of Oregon Scientific EW98, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oregon Scientific EW98.
However, one of the most important roles played by the user manual is to help in solving problems with Oregon Scientific EW98. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oregon Scientific EW98 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
