Instruction/ maintenance manual of the product EMR898A Oregon Scientific
Go to page of 14
GB Oregon Scientific“ In-Out Thermometer with Cable-Free Sensor and RF Clock Model: EMR898A User Manual T ABLE OF CONTENTS Introduction ................................................................................ 1 Brief Description ............
GB GB Clock Functions ......................................................................... 14 Enabling / Disabling Radio Reception .................................. 15 Language Options ............................................................
GB GB GENERAL W ARNINGS ¥ Do not attempt to repair the product yourself. Contact the retailer or our customer service department if it requires servicing.
GB GB OTHER NOTICES Disposing of this Product When disposing of this product, do so in accordance with your local waste disposal regulations. Statement of Responsibility Oregon Scientific assumes no r.
GB GB REMOTE UNIT Front View A. LCD Status Display Displays the current temperature measured by the remote unit. B. LED Indicator Flashes when the remote unit transmits a reading. Back View C. ° C/ ° F Slide Switch Selects temperature display between degrees Fahrenheit ( ° F) or Centigrade ( ° C).
GB GB Remote Unit 1 . Locate the battery compartment at the back of the remote unit ( → p. 6,E. ). 2 . Remove the screws on the battery compartment using a screwdriver (sold separately). 3. Insert two 1.5V alkaline AA batteries into the compartment, making sure to align the polarities correctly as shown by the diagram.
GB GB Remote Unit Similarly, you can choose to either mount the remote unit on a wall or make it stand on a flat surface. It is recommended to place the unit away from direct sunlight, rain, and snow.
GB GB REMOTE TEMPERA TURE READINGS The remote temperature readings are displayed on the top line of the LCD screen display ( → p. 1 1,A. ). Kinetic W ave Display The Kinetic W ave Display is only shown on the top line of the main unit. It displays the current receiving signal status from the remote unit to the main unit.
GB GB Resetting Maximum / Minimum T emperatures T o clear the maximum and minimum recorded temperatures: CLOCK FUNCTIONS Y our product is designed to synchronize its calendar clock automatically once it is brought within range of the radio signal from the U.
GB GB LANGUAGE OPTIONS TIME ZONE OPTIONS T ime zones around the world are identified by how many hours they are offset from the Greenwich Mean Time (GMT). US time zones are 5 to 10 hours behind the Greenwich Mean T ime. The main unit is pre- set to Pacific Standard T ime (PST).
GB GB * These states have certain parts where a different time zone is followed. Check to make sure to set the correct time zone for your area. ** These states have certain areas where Daylight Savings are not observed. In Hawaii, the whole state does not follow Daylight Savings.
GB GB ALARM FUNCTIONS The unit is equipped with 2 alarms: Weekday Alarm and Single Alarm. Activating / De-activating the Alarms T o return to normal clock mode, press the MODE button anytime during the procedures below. Setting the Alarms Press or to adjust the values for each setting.
GB GB Press SNOOZE ( → p. 5,M. ) to temporarily stop the alarm. The alarm will sound again after 8 minutes unless another key on the clock is pressed. T o stop the ringing completely , press ALARM . The Single Alarm will automatically disable itself after the clock has gone off at the preset time.
GB GB SPECIFICA TIONS Main Unit T ype Description T emperature Operation Range -4ßF to 140ßF (-20.0ßC to +60.0ßC) T emperature Resolution 0.2ßF (0.1ßC) RF T ransmission Frequency 433 MHz RF T ransmission Range Maximum 100 feet (30 meters) T emperature Sensing Cycle 78 seconds Power 2 x UM-3 or AA 1.
An important point after buying a device Oregon Scientific EMR898A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oregon Scientific EMR898A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oregon Scientific EMR898A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oregon Scientific EMR898A you will learn all the available features of the product, as well as information on its operation. The information that you get Oregon Scientific EMR898A will certainly help you make a decision on the purchase.
If you already are a holder of Oregon Scientific EMR898A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oregon Scientific EMR898A.
However, one of the most important roles played by the user manual is to help in solving problems with Oregon Scientific EMR898A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oregon Scientific EMR898A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center