Instruction/ maintenance manual of the product BAR628HG / BAR628HGU Oregon Scientific
Go to page of 10
1 EN CONTENTS Contents .................................................................. 1 Introduction ............................................................. 1 Product Overview ................................................... 2 Front View .
EN 2 1 2 3 4 5 6 1 2 3 5 4 6 7 8 PRODUCT OVERVIEW FRONT VIEW 1. LCD display 2. and : Increase or decrease setting / activate or deactivate RF Clock 3. MODE : Change display / settings 4. : View alarm status; set alarm 5. CHANNEL : Switch remote sensor 6.
3 EN LCD DISPLAY A. Weather Forecast Area B. Outdoor Temperature & Humidity Area C. Indoor Temperature & Humidity Area D. Clock / Alarm / Calendar Area 1. Weather display 2. Outdoor humidity 3. Sensor signal 4. Low battery icon for sensor 5. Outdoor temperature 6.
EN 4 TABLE STAND OR WALL MOUNT Use the stand on the back of the main unit / remote sensor, or mount it on a wall with a nail. To attach the main unit stand: To use the main unit wall mount: To use the.
5 EN 3. Set the channel. The switch is located in the battery compartment. 4. Place the sensor near the main unit. Press RESET on the sensor. Then, press and hold MEM and CHANNEL on the main unit to initiate signal sending between the sensor and the main unit.
EN 6 SELECT TEMPERATURE UNIT Slide the ° C / ° F switch into the desired location. The switch is located in the main unit battery compartment. The setting for the main unit overrides the remote sensor setting. SELECT CHANNEL NUMBER Press CHANNEL to switch between sensors 1-3.
7 EN RESET SYSTEM The RESET button is located in the main unit battery compartment. Press RESET when you change the batteries and whenever performance is not behaving as expected (for example, unable to establish radio frequency link with remote sensor or clock).
EN 8 Alarm Single alarm with 2-minute crescendo and 8-minute Snooze POWER Main unit batteries 3 x UM-3 (AA) 1.5V Sensor batteries 2 x UM-4 (AAA) 1.5V NOTE It is recommended that you use alkaline batteries with this product for longer performance. ABOUT OREGON SCIENTIFIC Visit our website (www.
9 EN © 2007 Oregon Scientific. All rights reserved. P/N: 086L003567-069.
EN 10 W eather Station Advanced Model: BAR628HG / BAR628HGU User Manual.
An important point after buying a device Oregon Scientific BAR628HG / BAR628HGU (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oregon Scientific BAR628HG / BAR628HGU yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oregon Scientific BAR628HG / BAR628HGU - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oregon Scientific BAR628HG / BAR628HGU you will learn all the available features of the product, as well as information on its operation. The information that you get Oregon Scientific BAR628HG / BAR628HGU will certainly help you make a decision on the purchase.
If you already are a holder of Oregon Scientific BAR628HG / BAR628HGU, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oregon Scientific BAR628HG / BAR628HGU.
However, one of the most important roles played by the user manual is to help in solving problems with Oregon Scientific BAR628HG / BAR628HGU. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oregon Scientific BAR628HG / BAR628HGU along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
