Instruction/ maintenance manual of the product BAR339DPA Oregon Scientific
Go to page of 10
E N 1 Weather Day & Night Model: BAR339DP / BAR339DPA / BAR339DPU / BAA339DPH USER MANUAL CONTENTS Overview ................................................................... 2 Front View ..........................................................
2 E N OVERVIEW FRONT VIEW 1. SNOOZE : Activate snooze alarm; turn on backlight; flip projected image 180º 2. Weather forecast 3. Outdoor remote sensor battery low 4. Radio controlled clock reception icon 5. PM: Indicates PM (12 hour mode) 6. Indicate alarm time is displayed 7.
E N 3 BACK VIEW 1. FOCUS Wheel : Adjust projection focus 2. AC/DC Adaptor socket 3. / : Decrease / increase value of the setting; enable / disable clock reception 4. SEARCH : Initiate sensor search 5. °C / °F : Select temperature unit 6. LIGHT ON/OFF : T urn backlight continuously On (adaptor installed) / only when SNOOZE key is pressed 7.
4 E N • Plug AC/DC adaptor into socket. Make sure the adapter is not obstructed and is easily accessible to the unit. T o completely disconnect from power, the adapter should be disconnected from the main unit. NOTE The main unit and adapter should not be exposed to wet conditions.
E N 5 For best results: • Place the sensor within 30 m (100 ft) of the main unit. • Place the sensor out of direct sunlight and moisture. • Position the sensor so that it faces the main unit, minimizing obstructions such as doors, walls and furniture.
6 E N MANUALLY SET CLOCK T o set the clock manually , disable the clock signal reception first. 1. Press and hold CLOCK . 2. Press / to change the settings. 3. Press CLOCK to confirm. The settings order is: time zone, 12/24 hr format, hour , minute, year , calendar mode (month – day / day – month), month, day and language.
E N 7 TEMPERATURE T o toggle between indoor / outdoor temperature display: Press TEMP . T o toggle temperature unit: Press °C / °F . T o auto-scan between sensors: Press and hold TEMP . T o deactivate auto-scan function: Press TEMP . T o toggle between current, minimum and maximum records for indoor / outdoor: Press MEM repeatedly .
8 E N SPECIFICATIONS MAIN UNIT TYPE DESCRIPTION L x W x H 142 x 42 x 158 mm (5.59 x 1.65 x 6.22 in) Weight 270g (9.52 oz) without battery Power 5V AC adaptor 2 x CR2032 batteries (for backup) REMOTE RF CLOCK THERMO SENSOR TYPE DESCRIPTION L x W x H 64 x 25 x 98 mm (2.
E N 9 NOTE The technical specifications for this product and the contents of the user manual are subject to change without notice. NOTE Features and accessories will not be available in all countries. For more information, please contact your local retailer .
10 E N which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver .
An important point after buying a device Oregon Scientific BAR339DPA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oregon Scientific BAR339DPA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oregon Scientific BAR339DPA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oregon Scientific BAR339DPA you will learn all the available features of the product, as well as information on its operation. The information that you get Oregon Scientific BAR339DPA will certainly help you make a decision on the purchase.
If you already are a holder of Oregon Scientific BAR339DPA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oregon Scientific BAR339DPA.
However, one of the most important roles played by the user manual is to help in solving problems with Oregon Scientific BAR339DPA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oregon Scientific BAR339DPA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
