Instruction/ maintenance manual of the product BAR208HG Oregon Scientific
Go to page of 8
1 EN CONTENTS Overview .................................................................... 2 Front View ............................................................. 2 Back View ............................................................. 3 Remote Sensor .
2 EN OVERVIEW FRONT VIEW (FIG 1) 1. Remote sensor reception indicator 2. Moon phase reading 3. Weather forecast 4. Indoor temperature with temperature trend 5. Clock signal reception indicator 6. MODE : Change settings / display 7. / : Increase / decrease settings; activate / deactivate clock reception signal 8.
3 EN BACK VIEW (FIG 2) 1 2 3 1. °C / °F : Select temperature unit 2. EU / UK : Se le ct the ne are st ra dio si gna l 3. RESET : Reset unit to default settings REMOTE SENSOR (FIG 3) 1. LED status indicator 2. Wall mount hole 3. Battery compartment 4.
4 EN LOCATION MEANING Clock / alarm and Main unit batteries low Indoor temperature area Outdoor temperature area Sensor batteries low REMOTE SENSOR The main unit can collect data from up to 3 sensors. T o set up the sensor: 1. Op en the b att ery co mpa rt men t ( see FI G 3).
5 EN ICON DESCRIPTION Main unit is searching for sensor(s). A channel has been found. The sensor cannot be found. TIP The transmission range may vary depending on many factors. Y ou may need to experiment with various locations to get the best results.
6 EN WEATHER FORECAST This product forecasts the next 12 to 24 hours of weather within a 30-50 km (19-31 mile) radius with a 75% accuracy . Sunny Partially Cloudy Cloudy Rainy Snowy WEATHER WARNING MESSAGE The weather warning messages provide indications of probable circumstances that may arise based on the weather station’s calculations.
7 EN WEATHER TRENDS The temperature, humidity and pressure trend icons are based on recent sensor readings. RISE STEADY F ALL MOON PHASE In moon phase mode, press or to scan through the years (2001 to 2099).
8 EN NOTE The technical specifications for this product and the contents of the user manual are subject to change without notice. SPECIFICATIONS TYPE DESCRIPTION MAIN UNIT L x W x H 94 x 51 x 182.5 mm (3.70 x 2.01 x 7.19 in) Weight 241 g (8.5 oz) without battery T emperature range -5°C to 50°C (23°F to 122°F) Resolution 0.
An important point after buying a device Oregon Scientific BAR208HG (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oregon Scientific BAR208HG yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oregon Scientific BAR208HG - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oregon Scientific BAR208HG you will learn all the available features of the product, as well as information on its operation. The information that you get Oregon Scientific BAR208HG will certainly help you make a decision on the purchase.
If you already are a holder of Oregon Scientific BAR208HG, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oregon Scientific BAR208HG.
However, one of the most important roles played by the user manual is to help in solving problems with Oregon Scientific BAR208HG. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oregon Scientific BAR208HG along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
