Instruction/ maintenance manual of the product BAR206A Oregon Scientific
Go to page of 10
E N 1 Weather Forecast Station with Atomic Time Model: BAR206 / BAR206A USER MANUAL CONTENTS Overview ..................................................................... 2 Front View .............................................................. 2 Back View .
E N 2 OVERVIEW FRONT VIEW (FIG 1) 1. Remote sensor reception indicator 2. Indoor temperature 3. Indoor humidity 4. Clock signal reception indicator 5. MODE : Change settings / display 6. LIGHT : Activate backlight for 5 seconds 7. / : Increase / decrease setting; activate / deactivate clock reception signal 8.
E N 3 2. In se rt th e ba tt er ie s, ma tc hi ng t he p ol ar it i es ( se e FI G 2) . 3. Press RESET after each battery change. LOCATION MEANING Clock / alarm and indoor Ma in u ni t b at te ri es l ow temperature area Outdoor temperature area Sensor batteries low REMOTE SENSOR The main unit can collect data from up to 3 sensors.
E N 4 Use alkaline batteries for longer usage and consumer grade lithium batteries in temperatures below freezing. SENSOR DATA TRANSMISSION To search for a sensor: Press and hold + MODE . The sensor reception icon in the remote sensor area shows the status: ICON DESCRIPTION Main unit is searching for sensor(s).
E N 5 Reception takes 2-10 minutes. If the signal is weak, it can take up to 24 hours to get a valid signal. If signal reception is unsuccessful, place your unit next to a window, press and hold to force another signal search.
E N 6 TEMPERATURE AND HUMIDITY To toggle temperature unit: Press °C / °F . To auto-scan between sensors: Press and hold + MEM to display each sensor’s data for 3 seconds. To end press . To toggle between current, minimum and maximum records for the selected sensor: Press MEM repeatedly.
E N 7 SPECIFICATIONS TYPE DESCRIPTION MAIN UNIT L x W x H 94 x 49 x 164 mm (3.70 x 1.93 x 6.46 in) Weight 241 g (8.5 oz) without battery Temperature range -5°C to 50°C (23°F to 122°F) Resolution 0.1°C (0.2°F) Signal frequency 433 MHz Humidity range 25% - 95% Humidity resolution 1% Power 3 x UM-3 (AA) 1.
E N 8 (2) This device must accept any interference received, inc lud ing inte rfer ence tha t ma y ca use unde sire d ope rati on. WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
E N 9 © 2007 Oregon Scientific. All rights reserved. P/N: 086L00 sample.
E N 10 Weather Forecast Station with Atomic T ime Model: BAR206 / BAR206A USER MANUAL.
An important point after buying a device Oregon Scientific BAR206A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oregon Scientific BAR206A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oregon Scientific BAR206A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oregon Scientific BAR206A you will learn all the available features of the product, as well as information on its operation. The information that you get Oregon Scientific BAR206A will certainly help you make a decision on the purchase.
If you already are a holder of Oregon Scientific BAR206A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oregon Scientific BAR206A.
However, one of the most important roles played by the user manual is to help in solving problems with Oregon Scientific BAR206A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oregon Scientific BAR206A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
