Instruction/ maintenance manual of the product BAR182HG Oregon Scientific
Go to page of 14
1 EN DIGIT AL WEA THER FORECASTER WITH REMOTE THERMO-HYGRO SENSOR AND ALARM CLOCK MODEL NO.: BAA182HG USER’S MANUAL INTRODUCTION Congratulations on your purchase of the W eather forecaster with cable free sensor and clock (BAR182HG).
2 EN A . FRONT DISPLA Y A four line easy-to-read LCD A1. WEA THER FORECAST WINDOW Graphically illustrates a weather forecast B. [ ] BA TTERY-LOW INDICA TOR Activates when the remote-sensor or main unit battery power is low C. [ 1 ] / [ 2 ] ALARM-ON ICONS Appears when the alarm is activated D .
3 EN FEA TURES: REMOTE THERMO-HYGRO SENSOR A. TWO-LINE LCD Displays the current temperature and humidity monitored by the remote unit B . LED INDICA TOR Flashes when the remote sensor transmits a reading C. °C/°F SLIDE SWITCH Selects between Centigrade (°C) and Fahrenheit (°F) D .
4 EN easier synchronization between the transmission and reception of signals. 4. Position the remote unit and main unit within effective transmission range, which, in usual circumstances, is up to 30 meters. Note that the effective range is vastly affected by the building materials and where the main and remote units are positioned.
5 EN LOW BA TTERY W ARNING When it is time to replace batteries, the respective low-battery indicator will show up when the respective channel is selected. HOW TO USE THE T ABLE ST AND OR W ALL MOUNTING The main unit has a removable table stand, which when connected, can support the unit on a flat surface.
6 EN T o force a signal search: Press and hold [CHANNEL] & [MEM] for 2-seconds to enforce a 3-minute search. This is useful in synchronizing the transmission and reception of the remote and main units. Repeat this step whenever you find discrepancies between the reading shown on the main unit and that on the respective remote unit.
7 EN HOW TO READ THE KINETIC W A VE DISPLA Y The kinetic wave display shows the signal receiving status of the main unit. There are three possible forms: The unit is in searching mode. Transmission data are securely registered. No signal received in search mode.
8 EN TEMPERA TURE, HUMIDITY & PRESSURE TREND INDICA T ORS The temperature-trend, humidity-trend and pressure trend indicators show the trends of collected readings.
9 EN The high-low displays are as follows: T o set a high or low temperature or humidity alarm: 1. Press [HI/LO] , channel-1 will be displayed. 2. Press [ ] to set the temperature or humidity limit. Each press will increase increments by one degree or percentage.
10 EN Cloudy Sunny Forecast Rainy Slightly Cloudy Indicator displays on the unit NOTE: 1. The accuracy of a general pressure-based weather forecast is about 70% to 75%. 2. The weather forecasts from this unit are predictions that cover the next 12 to 24 hours.
11 EN For the 2nd time zone, which is indicated by the ZONE icon, enter the hour offset using the [ ] and [ ] (CLOCK) buttons and the BAA182HG will calculate the second zone-time accordingly . If there is an item you do not wish to change, simply press [ MODE] to bypass the item.
12 EN MAINTENANCE When handled properly , this unit is engineered to give you years of satisfactory service. Here are a few product care instructions: 1. Do not immerse the unit in water. If the unit comes in contact with water, dry it immediately with a soft lint-free cloth.
13 EN NOTE ON COMPLIANCE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operations.
14 EN W ARRANTY This product is warranted to be free of manufacturing defects for a period of 1 year from date of retail purchase. Defective product should be directed to the place of retail purchase for exchange. Should this not be possible, contact our customer care department for assistance and a return material authorization.
An important point after buying a device Oregon Scientific BAR182HG (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oregon Scientific BAR182HG yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oregon Scientific BAR182HG - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oregon Scientific BAR182HG you will learn all the available features of the product, as well as information on its operation. The information that you get Oregon Scientific BAR182HG will certainly help you make a decision on the purchase.
If you already are a holder of Oregon Scientific BAR182HG, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oregon Scientific BAR182HG.
However, one of the most important roles played by the user manual is to help in solving problems with Oregon Scientific BAR182HG. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oregon Scientific BAR182HG along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
