Instruction/ maintenance manual of the product L4R Asus
Go to page of 72
Copyright Information No part of this manual, including the products and software described in it, may be reproduced, transmitted, tran- scribed, stored in a retrieval system, or translated into any l.
1 Product Name: Notebook PC Hardware Manual Revision: 3 E1510 Release Date: December 2003 Notebook PC Hardware User ’ s Manual.
2 Safety Statements Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation.
3 Safety Statements Nordic Cautions (for Notebook PC with Lithium-Ion Battery) (Japanese) Macrovision Corporation Product Notice This product incorporates copyright protection technology that is protected by method claims of certain U.S.A. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
4 Safety Statements Safety Statements Disconnect the AC power and remove the battery pack(s) before cleaning. W ipe the Notebook PC using a clean cellulose sponge or chamois cloth dampened with a solution of nonabrasive detergent and a few drops of warm water and remove any extra moisture with a dry cloth.
5 T ransportation Precautions T o prepare the Notebook PC for transport, you should turn it OFF and disconnect all external periph- erals to prevent damage to the connectors . The hard disk drive’ s head retracts when the power is turned OFF to prevent scratching of the hard disk surface during transport.
6 Danish Dutch English Finnish French German Greek Italian Portuguese Spanish Swedish CTR 21 Approval (for Notebook PC with built-in Modem) Safety Statements.
7 UL Safety Notices Required for UL 1459 covering telecommunications (telephone) equipment intended to be electrically connected to a telecommunication network that has an operating voltage to ground that does not exceed 200V peak, 300V peak-to-peak, and 105V rms, and installed or used in accordance with the National Electrical Code (NFP A 70).
8 Contents 1. Introducing the Notebook PC ................................................................ 1 1 About This User’s Manual ..................................................................................................... 12 Notes For This Manual .
9 4. Using the Notebook PC ......................................................................... 39 Using the T ouchpad ......................................................................................................... 40 T ouchpad Usage Illustrations .
10 Appendix ..................................................................................................... 57 USB Flash Memory .......................................................................................................... 58 Optional Accessories .
11 1. Introducing the Notebook PC About This User’s Manual Notes For This Manual.
12 1 Introducing the Notebook PC About This User ’ s Manual Y ou are reading the Notebook PC User ’ s Manual. This User ’ s Manual provides information on the various components in the Notebook PC and how to use them. The following are major sections of this User ’ s Manuals: 1.
13 Introducing the Notebook PC 1 Preparing your Notebook PC These are only quick instructions for using your Notebook PC. Read the later pages for detailed infor - mation on using your Notebook PC. 1. Install the battery pack 1. Unlock the battery and drive lock 2 .
14 1 Introducing the Notebook PC.
15 2. Knowing the Parts Top Side Bottom Side Left Side Right Side Rear Side Front Side.
16 2 Knowing the Parts T op Side Refer to the diagram below to identify the components on the top side of the Notebook PC. Details are given starting from the top and going clockwise.
17 Knowing the Parts 2 Display Panel The display panel functions the same as a desktop monitor . The Notebook PC uses an active matrix TFT LCD, which provides excellent viewing like that of desktop monitors. Unlike desktop monitors, the LCD panel does not produce any radiation or flickering, so it is easier on the eyes.
18 2 Knowing the Parts Bottom Side Refer to the diagram below to identify the components on this side of the Notebook PC. Details are given starting from the top and going clockwise. IMPORT ANT! The bottom of the Notebook PC can get very hot. Be careful when han- dling the Notebook PC while it is in operation or recently been in operation.
19 Knowing the Parts 2 Hard Disk Drive Compartment The hard disk drive is secured in a compartment. Hard disk drive upgrades are to be done by authorized service centers or dealers only . Memory Compartment The memory compartment contains a memory slot for memory installation.
20 2 Knowing the Parts Left Side Refer to the diagram below to identify the components on this side of the Notebook PC. Fast IrDA Port PC Card (PCMCIA) Socket Hard Drive Compartment (see bottom side) .
21 Knowing the Parts 2 Right Side Refer to the diagram below to identify the components on this side of the Notebook PC. Optical Drive USB 2.0 Port Emergency Eject Activity LED Electronic Eject USB 2.0 Port The Universal Serial Bus is compatible with USB 2.
22 2 Knowing the Parts TV-Out Port For times when you need a really big display , try the TV -Out function. TV -Out allows a high definition connection to a television or video projection device using a Super VHS (S-V ideo) cable (not pro- vided). An adapter is provided for use with RCA inputs available on all standard video devices.
23 Knowing the Parts 2 Kensington ® Lock Port The Kensington ® lock port allows the Notebook PC to be secured using Kensington ® compatible Note- book PC security products. These security products usually include a metal cable and lock that prevent the Notebook PC to be removed from a fixed object.
24 2 Knowing the Parts Head Output Display Panel Latch Status Indicators Mic Input Audio Input Right Audio Speaker Left Audio Speaker Audio DJ Control Buttons Front Side Refer to the diagram below to identify the components on this side of the Notebook PC.
25 3. Getting Started Using the Battery Pack Operating Systems Power Connection Powering ON The Notebook PC Power Management - Stand By and Hibernate Restarting or Rebooting Powering OFF The Notebook .
26 3 Getting Started Using the Battery Pack Installing and Removing the Battery Pack Y our Notebook PC may or may not have its battery pack installed. If your Notebook PC does not have its battery pack installed, use the following procedures to install the battery pack.
27 Getting Started 3 Battery Care The Notebook PC’ s battery pack, like all rechar geable batteries, has a limit on the number times it can be recharged.
28 3 Getting Started NOTE: This Notebook PC may come with either a two or three-prong plug depending on territory . If a three-prong plug is provided, you must use a grounded AC outlet or use a properly grounded adapter to ensure safe operation of the Notebook PC.
29 Getting Started 3 The Power-On Self T est (POST) When you turn ON the Notebook PC, it will first run through a series of software-controlled diagnostic tests called the Power-On Self T est (POST). The software that controls the POST is installed as a permanent part of the Notebook PC’ s architecture.
30 3 Getting Started Power Management - “Stand By” & “Hibernate” Power management settings can be found in the W indows control panel. The following shows the power options properties in W indows. Y ou can define “Stand By” or “Shut down” for closing the display panel, pressing the power button, or activating sleep mode.
31 Getting Started 3 Restarting or Rebooting After making changes to your operating system, you may be prompted to restart the system. Some installation processes will provide a dialog box to allow restart. T o restart the system manually: Click the Start button and select Shut Down | and choose Restart .
32 3 Getting Started Powering OFF the Notebook PC In W indows XP , the Notebook PC can be powered OFF by using Start | Shut Down... | T urn off (or Shut down) .
33 Getting Started 3 Above the Keyboard Instant Status Indicators and Launch Keys Number Lock Indicates that number lock [Num Lk] is activated when lighted. Number lock allows some of the key- board letters to act as numbers for easier numeric data input.
34 3 Getting Started Front Edge of Notebook PC Instant Launch Keys Email Launch Key Pressing this button will launch your Email application while W indows is running. Internet Launch Key Pressing this button will launch your Internet browser application while W indows is running.
35 Getting Started 3 Super Performance High Performance Game Performance DVD Movie Performance Email/Office Performance Presentation Performance Audio Listening Performance Battery-Saving Performance .
36 3 Getting Started Using the Keyboard Colored Hot Keys The following defines the colored hot keys on the Notebook PC’ s keyboard. The colored commands can only be accessed by first pressing and holding the function key while pressing a key with a colored command.
37 Getting Started 3 Keyboard as a Numeric Keypad The numeric keypad is embedded in the keyboard and consists of 15 keys that make number intensive input more convenient. These dual-purpose keys are labeled in orange on the key caps. Numeric as- signments are located at the upper right hand corner of each key as shown in the figure.
38 3 Getting Started Keyboard as Cursors The keyboard can be used as cursors while Number Lock is ON or OFF in order to increase navigation ease while entering numeric data in spreadsheets or similar applications. W ith Number Lock OFF , press and one of the cursor keys shown below .
4. Using the Notebook PC Pointing Device Optical Drive PC Card (PCMCIA) Socket Modem and Network Connections IR Wireless Communication AC Power System Battery Power System Power Management Modes Noteb.
40 4 Using the Notebook PC Pointing Device The Notebook PC’ s integrated touchpad pointing device is fully compatible with all two/three-but- ton and scrolling knob PS/2 mice. The touchpad is pressure sensitive and contains no moving parts; therefore, mechanical failures can be avoided.
41 Using the Notebook PC 4 Double-clicking/Double-tapping - This is a common skill for launching a program directly from the corresponding icon you select. Move the cursor over the icon you wish to execute, press the left button or tap the pad twice in rapid succession, and the system launches the corresponding program.
42 4 Using the Notebook PC Caring for the T ouchpad The touchpad is pressure sensitive. If not properly cared for , it can be easily damaged. T ake note of the following precautions. • Make sure the touchpad does not come into contact with dirt, liquids or grease.
43 Using the Notebook PC 4 Inserting an optical disc 1. While the Notebook PC’ s power is ON, press the drive’ s eject button and the tray will eject out partially . 2. Gently pull on the drive’ s front panel and slide the tray completely out. Be careful not to touch the CD drive lens and other mechanisms.
44 4 Using the Notebook PC A CD drive letter should be present regardless of the presence of a CD disc in the drive. After the CD is properly inserted, data can be accessed just like with hard disk drives; except that nothing can be written to or changed on the CD.
45 Using the Notebook PC 4 Region Definitions Region 1 Canada, US, US T erritories Region 2 Czech, Egypt, Finland, France, Germany , Gulf States, Hungary , Iceland, Iran, Iraq, Ireland, Italy , Ja- pa.
46 4 Using the Notebook PC PC Card (PCMCIA) Socket The Notebook PC supports PC Cards (or sometimes referred to as PCMCIA cards) to allow expansion like PCI cards on desktop computers. This allows you to customize your Notebook PC to meet a wide range of application needs.
47 Using the Notebook PC 4 1 5 2 3 4 Inserting a PC Card (PCMCIA) Carefully connect any cables or adapters needed by the PC card. Usually connectors can only be inserted in one orientation. Look for a sticker , icon, or marking on one side of the connector represent- ing the top side.
48 4 Using the Notebook PC Modem and Network Connections The built-in modem and network model comes with both an RJ-1 1 and an RJ-45 port. RJ-11 telephone cables have two or four wires and are used to.
49 Using the Notebook PC 4 T elephone Wall Jack T elephone cable (RJ-1 1 connectors) CAUTION: For electrical safety concerns, only use telephone cables rated 26A WG or higher .
50 4 Using the Notebook PC Network Connection Connect a network cable, with RJ-45 connectors on each end, to the modem/network port on the Note- book PC and the other end to a hub or switch. For 100BASE-TX speeds, your network cable must be category 5 (not category 3) with twisted-pair wiring.
51 Using the Notebook PC 4 CAUTION! Disable the infrared communication when you are not using the IR for long periods because the IR consumes a great deal of Windows resources which will de- crease the Notebook PC’ s performance.
52 4 Using the Notebook PC AC Power System The Notebook PC power is comprised of two parts, the power adapter and the battery power system. The power adapter converts AC power from a wall outlet to the DC power required by the Notebook PC. The battery pack consists of a set of battery cells housed together .
53 Using the Notebook PC 4 Using Battery Power A fully-charged battery pack provides the Notebook PC a few hours of working power . But the actual figure varies depending on how you use the power saving features, your general work habits, the CPU, system memory size, and the size of the display panel.
54 4 Using the Notebook PC Power Management Modes The Notebook PC has a number of automatic or adjustable power saving features that you can use to maximize battery life and lower T otal Cost of Ownership (TCO). Y ou can control some of these fea- tures through the Power menu in the BIOS Setup.
55 Using the Notebook PC 4 Thermal Power Control There are three power control methods for controlling the Notebook PC’ s thermal state. These power control cannot be configured by the user and should be known in case the Notebook PC should enter these states.
56 4 Using the Notebook PC Notebook PC Upgrades System Memory Expansion Additional memory will increase application performance by decreasing hard disk access.
57 Appendix Optional Accessories Optional Connections Internal Modem Compliancy Glossary Notebook PC Information.
58 A Appendix Optional Accessories These items, if desired, come as optional items to complement your Notebook PC. USB Hub Attaching an optional USB hub will increase your USB ports and allow you to quickly connect or disconnect many USB peripherals through a single cable.
59 Appendix A Optional Accessories (Cont.) These items, if desired, come as optional items to complement your Notebook PC. Wireless LAN Cardbus Card or USB The SpaceLink™ Cardbus Card is a dual band (IEEE 802.1 1a/b) wireless LAN adapter that fits into a Notebook PC’ s PCMCIA T ype II slot with Cardbus support.
60 A Appendix W ARNING! T o prevent system failures, use (Safely Remove Hardware) on the taskbar before disconnecting the USB floppy disk drive. Eject the floppy disk before transporting the Notebook PC to prevent damage from shock. Optional Accessories (Cont.
61 Appendix A Monitor Out Connection Attaching an optional VGA/LCD monitor is just like that of a standard desktop PC (some configu- rations may require additional display driver set- tings. Y ou can view the Notebook PC display panel while simultaneously allowing others to view the external monitor .
62 A Appendix Optional Connections (Cont.) These items, if desired, may be purchased from third-parties. IEEE1394 Connection 1394 is a high speed serial bus like SCSI but has simple connections and hot-plugging capabilities like USB.
63 Appendix A Internal Modem Compliancy The Notebook PC with internal modem model complies with JA TE (Japan), FCC (US, Canada, Korea, T aiwan), and CTR21. The internal modem has been approved in accordance with Council Decision 98/ 482/EC for pan-European single terminal connection to the public switched telephone network (PSTN).
64 A Appendix This table shows the countries currently under the CTR21 standard. Country Applied More T esting Austria 1 Ye s N o Belgium Y es No Czech Republic No Not Applicable Denmark 1 Ye s Ye s F.
65 Appendix A Glossary ACPI (Advanced Configuration and Power Management Interface) Modern standard for reducing power usage in computers. APM (Advanced Power Management) Modern standard for reducing power usage in computers.
66 A Appendix BIOS (Basic Input/Output System) BIOS is a set of routines that affect how the computer transfers data between computer components, such as memory , disks, and the display adapter . The BIOS instructions are built into the computer ’ s read-only memory .
67 Appendix A IDE (Integrated Drive Electronics) IDE devices integrate the drive control circuitry directly on the drive itself, eliminating the need for a separate adapter card (in the case for SCSI devices). UltraDMA/66 or 100 IDE devices can achieve up to 33MB/Sec transfer .
68 A Appendix POST (Power On Self Test) When you turn on the computer , it will first run through the POST , a series of software-controlled diagnostic tests. The POST checks system memory , the motherboard circuitry , the display , the key- board, the diskette drive, and other I/O devices.
69 Appendix A.
70 A Appendix Notebook PC Information This page is provided for recording information concerning your Notebook PC for future reference or for technical support.
Contact Information ASUST eK COMPUTER INC. (Asia-Pacific) Company Address: 150 Li-T e Road, Peitou, T aipei, T aiwan 112 General T elephone: +886-2-2894-3447 W eb Site Address: www .asus.com.tw General Fax: +886-2-2894-7798 General Email: info@asus.com.
An important point after buying a device Asus L4R (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Asus L4R yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Asus L4R - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Asus L4R you will learn all the available features of the product, as well as information on its operation. The information that you get Asus L4R will certainly help you make a decision on the purchase.
If you already are a holder of Asus L4R, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Asus L4R.
However, one of the most important roles played by the user manual is to help in solving problems with Asus L4R. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Asus L4R along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
