Instruction/ maintenance manual of the product RMR616HGA Oregon
Go to page of 16
W ireless Thermo-Hygro Clock Model : RMR616HGA User Manual RMR616HGA lab test cover R 2 1/8/04, 7:05 PM 1.
EN 1 CONTENTS Contents ................................................................... 1 Introduction .............................................................. 2 About Oregon Scientific .......................................... 2 Product Overview .
EN 2 INTRODUCTION Thank you for selecting the Oregon Scientific TM Wireless Thermo-Hygro Clock (RMR616HGA). This device bundles precise time keeping, dual alarm, and temperature and humidity monitoring features into a single tool you can use from the convenience of your home.
EN 3 PRODUCT OVERVIEW FRONT VIEW 1. ALARM button: view alarm status; set alarm 2. UP button: increase setting /activate radio- controlled clock /activate or deactivate alarm 3. DOWN button: decrease setting /deactivate radio- controlled clock /activate or deactivate alarm 4.
EN 4 BACK VIEW 1. RESET hole 2. ° C / ° F switch 3. Battery compartment 4. T able stand 4 3 2 1 RMR616HGA lab test R2 1/17/04, 5:03 PM 4.
EN 5 REMOTE SENSOR ( THGR122NX) 1. LCD display 2. LED Status indicator 1 2 1 2 3 4 1. W all mount hole 2. RESET 3. Channel number (1 - 3) 4. Battery compartment (Battery compartment cover not shown) R.
EN 6 CHANGE SETTINGS 1. Press and hold MODE for 2 seconds to enter setting mode. 2. Press UP or DOWN to change settings. 3. Press MODE to confirm. GETTING ST ARTED BA TTERIES Batteries are not supplied with this product. Y ou will need to purchase 2 x UM-3 (AA) 1.
EN 7 3. Place the sensor near the main unit. Press RESET on the sensor to initiate signal sending between the sensor and the main unit. The reception icon on the main unit will blink for approximately 3 minutes while it is searching for the sensor . (Refer to the Search for Sensor section for more information.
EN 8 NOTE To force a manual search for Atomic Clock signals, press and hold UP for 2 seconds. If no signal is found, check the batteries. If the Atomic Clock signal is received and the hour is incorrect, use the "hour offset" feature to adjust it to to the right value.
EN 9 TURN A TOMIC CLOCK ON/OFF Perform this step if you cannot receive Atomic Clock signals. Press and hold DOWN for 2 seconds. Then, manually set the clock following the "Set Clock" instructions (below). The signal icon indicates that the Atomic Clock feature is ON.
EN 10 TEMPERA TURE AND HUMIDITY This product can display current, minimum, and maximum temperatures and humidity percentage information collected by the remote sensors. Data is collected and displayed every 40 seconds. SELECT TEMPERA TURE UNIT Slide the ° C / ° F switch into the desired location.
EN 11 When you press RESET , all settings will return to default value, and you will lose all stored information. SAFETY AND CARE Clean the product with a slightly damp cloth and alcohol- free mild detergent. Avoid dropping the product or placing it in a high-traffic location.
EN 12 Do not make any changes or modifications to this product. Unauthorized changes may void your right to use the product. The technical specification of this product and contents of this user guide are subject to change without notice. Images not drawn to scale.
EN 13 Alarm Weekday and Single Alarm; 2- minute crescendo POWER Main unit batteries 2 x UM-3 (AA) 1.5V alkaline Sensor batteries 2 x UM-4 (AAA) 1.5V alkaline TEMPERA TURE Unit ° C or ° F Indoor Range -5 ° C to 50 ° C (23 ° F to 122 ° F) Outdoor Range -20 ° C to 60 ° C (-4 ° F to 140 ° F) Resolution 0.
EN 14 DECLARA TION OF CONFORMITY The information below is not to be used as contact for support or sales. Please call our customer service number (listed on our website at www .oregonscientific.com, or on the warranty card for this product) for all inquiries instead.
P/N.: 086-003327-015 © 2004 Oregon Scientific. All rights reserved. RMR616HGA lab test back cover 1/8/04, 10:07 PM 1.
An important point after buying a device Oregon RMR616HGA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oregon RMR616HGA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oregon RMR616HGA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oregon RMR616HGA you will learn all the available features of the product, as well as information on its operation. The information that you get Oregon RMR616HGA will certainly help you make a decision on the purchase.
If you already are a holder of Oregon RMR616HGA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oregon RMR616HGA.
However, one of the most important roles played by the user manual is to help in solving problems with Oregon RMR616HGA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oregon RMR616HGA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
