Instruction/ maintenance manual of the product RM382P Oregon
Go to page of 10
EN 1 TimeSphere Wireless Projection Clock Model No: RM382P / RM382P A USER MANUAL CONTENTS Introd uction . ...... ....... ....... ....... ....... ....... ....... ...... ....... 2 Overview ...............................................................
EN 2 1 2 3 4 5 6 7 8 INTRODUCTION Thank you for selecting the Oregon Scientific ™ projection clock (RM382P / RM382P A). NOTE Please keep this manual handy as you use your new product. It contains practical step-by-step instructions, as well as technical specifications and warnings you should know about.
EN 3 1 2 3 4 5 6 7 BASE VIEW 1. Charging base circles: Position the unit to project the time vertically at 3 different angles 2. Indoor temperature sensor 3. V entilation holes 4. Adapter slot 5. °C / °F: Selects temperature unit 6. EU / UK switch (RM382P only): Slide to select your nearest radio signal base 7.
EN 4 PROJECTION UNIT Insert rechargeable batteries (2 x AAA 1.5V) before first use, matching the polarity (+ and -): 1. T wist the ball counter-clockwise until it loosens. 2. Pull the top half upwards. 3. Lift up the battery compartment cover. 4. Slide the battery in.
EN 5 RM382P: • DCF-77 generated from Frankfurt, Germany for Central Europe • MSF-60 generated from Rugby , England The radio signal range is 1500 km (932 miles). RM382P A: • WWVB-60 generated from the atomic clock in Fort Collins, Colorado The radio signal range is 3219 km (2000 miles).
EN 6 1. Press ALARM to toggle between the alarm displays and select either alarm 1 or 2, for setting. 2. Press and hold ALARM to enter alarm setting mode. The alarm setting will blink. 3. Press / to change the settings. Press and hold / to speed through values.
EN 7 T o use the projector remotely: 1. Make sure the projection unit has been fully charged (see Power section). 2. T wist open the projection unit and press , the projection beam should now be displayed. 3. Close the projection unit and twist until it clicks shut.
EN 8 instructions. Do not mix new and old batteries as the old ones may leak. • Do not dispose this product as unsorted municipal waste. Collection of such waste separately for special treatment is necessary . • Due to printing limitations, the displays shown in this manual may differ from the actual display .
EN 9 ABOUT OREGON SCIENTIFIC Visit our website (www .oregonscientific.com) to learn more about Oregon Scientific products such as digital cameras; MP3 players; children’s electronic learning products and games; projection clocks; health and fitness gear; weather stations; and digital and conference phones.
EN 10 B ISM equipment, pursuant to Part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
An important point after buying a device Oregon RM382P (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oregon RM382P yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oregon RM382P - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oregon RM382P you will learn all the available features of the product, as well as information on its operation. The information that you get Oregon RM382P will certainly help you make a decision on the purchase.
If you already are a holder of Oregon RM382P, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oregon RM382P.
However, one of the most important roles played by the user manual is to help in solving problems with Oregon RM382P. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oregon RM382P along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
