Instruction/ maintenance manual of the product V Oracle Audio Technologies
Go to page of 12
O RACLE A UDIO D ELPHI MARK V turntable 1 O WNER’S MANUAL by Oracle Audio Technologies inc..
T ABLE OF CONTENTS Forewo rd .................................................................................................... 1 How to ... ... pack and unpack y our Del phi ................................................................. 2 ... assemble the sub cha ssis .
ow to ... ... pack and unpack your Delphi H - Remove the inner box by lifting it straight up and out. Open the flaps on both ends and slide out the styrofoam packaging.
4 - Locate the bearing assembly in the lower se ction of the packaging. Remove the 3 mounting screws. - Locate the tool kit in the lower section and select the appropriate allen key... 9/64th - Lift the subchassis straight up and mount the bearing assembly from underneath (ground lug side).
5 Important ! If you are planning to cut your own mounting board, remember that the cutting of the arm board can sometimes be troublesom e as well as being a potential hazard. The use of an adequate tooling is important to both accuracy and safety. - Use stainless steel or aluminum screws to mount the cartridge for maximum rigidity.
6 changing the position of the spring in its holder. The color coding is visible from the inside at the wider end of the spring. Note 2: The reference to clockwise or counter-clockwise is determined by viewing the spring from above, unless otherwise mentionned.
- Place the subchassis over the suspension modules. - Install the platter without the drive belt. - Locate the suspension gauge in the documentation envelope. - Punch the suspension gauge out of the card. Do not consider "A", nor 1 & 2, they were used on the earlier models.
8 be done by simply lifting the suspension housing just enough so you can see the spring. If you can see the spring anywhere from almost flush to up to 3 coils out of the spring holder, the spring is in a safe range.
9 Note 3: In the event that the drive belt becomes contaminated, clean it with denatured alcohol. Clean the motor pulley and the drive hub at the same time. ... remove the platter with the drive belt installed Note: The following is not an operation related to the assembly of your Delphi but a procedure to prevent overstretching the drive belt.
... attach the ground lead - Loosen the thumb nut from under the sub-chassis near the tonearm and insert one end of the lead. - Attach the other end of the lead to the ground post of your pre-amplifier.
11 Check: - drive belt - motor connection plug for a broken wire - drive module for a broken wire - defective drive module ... if the platter is not parallel with the plinth Check: - suspension calibr.
12 to firmly secure the screws. Do not forget to add the content of one oil vial (about 3 cc) before installing the platter. - As a precaution to preserve the furniture your Delphi sits on, it is advisable to use a folded paper towel under the main bearing for a few weeks in the case of a bearing spillage.
An important point after buying a device Oracle Audio Technologies V (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oracle Audio Technologies V yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oracle Audio Technologies V - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oracle Audio Technologies V you will learn all the available features of the product, as well as information on its operation. The information that you get Oracle Audio Technologies V will certainly help you make a decision on the purchase.
If you already are a holder of Oracle Audio Technologies V, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oracle Audio Technologies V.
However, one of the most important roles played by the user manual is to help in solving problems with Oracle Audio Technologies V. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oracle Audio Technologies V along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
