Instruction/ maintenance manual of the product EP725 Optoma Technology
Go to page of 30
1 E nglish Table of Contents T able of Contents ...................................................................................... 1 Usage Notic e .............................................................................................. 2 Precautions .
2 E nglish Usage Notice Precautions Follow all warnings, precautions and maintenance as recom- mended in this users guide to maximize the life of your unit. Warning- Do not look into the projectors lens when the lamp is on. The bright light may hurt your eyes.
3 E nglish Do: v Turn off the product before cleaning. v Use a soft cloth moistened with mild detergent to clean the display housing. v Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Dont: v Block the slots and openings on the unit provided for ventilation.
4 E nglish Product Features This product is an XGA single chip 0.7 DLP TM projector. The outstanding features of it are listed as follows: u True XGA, 1024 x 768 addressable pixels u 2.1 lbs (0.95 kgs) compact design u Single chip DLP TM technology u NTSC/NTSC4.
5 E nglish Power Cord S-Video Cable VGA Cable Remote Control Battery Users Guide Introduction Composite Video Cable Projector with lens cap Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete.
6 E nglish Introduction Main Unit Product Overview 1 . Focus Ring 2 . Zoom Ring 3 . Elevator Button 4 . Zoom Lens 5 . Remote Control Receiver 6 . Connection Ports 7 .
7 E nglish Panel Control Introduction 1 . Power/Standby Indicator 2 . Warning Indicator 3 . Power 4 . Source 5 . Directional Select and Enter Keys 6 . Keystone Correction 7 . Menu (On/Off) 1 3 4 7 2 6 5 Connection Ports 1 . Power Connector 2 PC Analog Signal/HDTV/Component Video Connector 3 .
8 E nglish Remote Control Introduction 1 2 3 4 5 6 7 8 9 10 1 . Transmit Indicator Light 2 . Power 3 . Source 4 . Keystone Correction 5 . Zoom In/Zoom Out 6 .
9 E nglish 1. Power Cord 2. VGA Cable 3. S-Video Cable 4. Composite Video Cable Connecting the Projector v To ensure the projector works well with your computer, please configure the display mode of your graphic card to make it less than or equal to 1024 X 768 resolu tion.
10 E nglish Installation Lens cap Power 1 3 Powering On the Projector 1. Remove the lens cap. 2. Ensure that the power cord and signal cable are securely connected. 3. Turn on the lamp by pressing Power button on the control panel. The startup screen will display for 20 seconds and the Power/Standby indicator will flash green .
11 E nglish Powering Off the Projector 1. Press the Power button to turn off the projector lamp. 2. After pressing the Power button, you will see a message Power off the lamp? on the on-screen display. Press the Power button again to confirm.
12 E nglish Installation Adjusting the Projected Image Adjusting the Projector Height Tilt Adjusted wheel Elevator Foot 1 2 3 Elevator Button The projector is equipped with an elevator foot for adjusting the projector height. To raise the projector: 1.
13 E nglish . x a M ) m c 4 . 1 8 ( " 1 . 2 3 ) m c 6 . 3 0 2 ( " 2 . 0 8 ) m c 3 . 9 3 3 ( " 6 . 3 3 1 ) m c 2 . 7 0 4 ( " 3 . 0 6 1 ) m c 0 . 3 4 5 ( " 8 . 3 1 2 ) m c 7 . 8 7 6 ( " 2 . 7 6 2 . n i M) m c 0 . 0 7 ( " 6 .
14 E nglish User Controls Remote Control Panel Control Panel Control & Remote Control There are two ways for you to control the functions: Remote Control and Panel Control. Use the Panel Control Power 4 Refer to the Power On/Off the Projector section on page 10~11.
15 E nglish Use the Remote Control Power 4 Refer to the Power On/Off the Projector section on page 10~11. Source 4 Press Source to choose RGB, Component-p, Component-i, S-Video, Composite Video and HDTV sources. PiP 4 Displays the PiP menu of the On Screen Display (OSD).
16 E nglish The Projector has multilingual On-Screen Display(OSD) menus that allow you to make image adjustments and change a variety of settings. The projector will detect the source automatically. How to operate 1. To open the OSD menu, press the Menu button on the Remote Control or Panel Control.
17 E nglish Language Language You can display the multilingual OSD menu . Use the or key to select your prefered language. Press the Menu button to finalize the selection.
18 E nglish User Controls All Images Brightness Adjusting the brightness of the image. 4 Press the to darken image. 4 Press the to lighten the image. Contrast The contrast controls the degree of difference between the lightest and darkest parts of the picture.
19 E nglish All Image Reset This Menu Choose Yes to return the display parameters on this menu to their factory default settings. Computer / V ideo mode User Controls.
20 E nglish User Controls Computer Image Auto Image The projector automatically adjusts frequency, tracking, horizontal and vertical position. With most signal sources, Auto Image provides the best results. Frequency Frequency is for changing the display data frequency to match the frequency of your computers graphic card.
21 E nglish Video Image Video mode Color Saturation The color setting adjusts a video image from black and white to fully saturated color. 4 Press the to decrease the amount of color in the image. 4 Press the to increase the amount of color in the image.
22 E nglish User Controls Menu Location Choose the Menu location on the display screen. Projection Direction 4 Front-Desktop The factory default setting. 4 Rear-Desktop When you select this function, the projector reverses the image so you can project behind a translucent screen.
23 E nglish Management Computer / Video mode User Controls Machine Reset Choose Yes to return the display parameters (except for Lamp Hours) on all menus to their factory default settings.
24 E nglish PIP PIP Choose On to turn on the PIP screen. PIP Location Choose the PIP screen position on the display screen. PIP Switch Source Choose the input source of the projector on the PIP screen. Reset This Menu Choose Yes to return the display parameters on this menu to their factory default settings.
25 E nglish Appendices Problem : No image appears on screen. 4 Ensure all the cables and power connections are correctly and securely connected as described in the Installation section. 4 Ensure the pins of connectors are not crooked or broken. 4 Check if the projection lamp has been securely installed.
26 E nglish Appendices 4. Follow above steps 1~2. Click on the Advanced Properties button. 5. Select the Change button under the Monitor tab . 6. Click on Show all devices. Then select Standard monitor types under the Manufactures box ; choose the resolution mode you need under the Models box.
27 E nglish Problem : Image is out of focus 4 Adjust the Focus Ring on the projector lens. 4 Make sure the projection screen is between the required distance 3.94ft.(1.2m)~ 32.81ft.(10.00m) from the projector. Problem : The screen is outstretched when displaying 16:9 DVD.
28 E nglish Appendices Changing the lamp The projector will detect the lamp life itself. It will show you a warning message Lamp may fail soon ! Replacement Suggested ! When you see this message, please contact your local reseller or service center to change the lamp as soon as possible.
29 E nglish Specifications Light Valve - Single Chip DLP TM Technology Lamp - 120W User Replaceable P-VIP Lamp Number of Pixels - 1024 pixels(H) X 768 lines(V) Displayable Color - 16.7M colors Projection Lens - F/2.8~3.1 f=25.8~30.0mm with 1.16x Manual zoom lens Projection Screen Size - 27.
30 E nglish A G V A S E V 0 5 3 X 0 4 6 0 7 5 . 1 3 A G V A S E V 0 5 3 X 0 4 6 5 8 9 . 7 3 A G V A S E V 0 0 4 X 0 4 6 5 8 9 . 7 3 A G V A S E V 0 8 4 X 0 4 6 0 6 5 . 1 3 A G V A S E V 0 8 4 X 0 4 6 2 7 9 . 7 3 A G V A S E V 0 8 4 X 0 4 6 5 7 5 . 7 3 A G V A S E V 0 8 4 X 0 4 6 5 8 3 .
An important point after buying a device Optoma Technology EP725 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Optoma Technology EP725 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Optoma Technology EP725 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Optoma Technology EP725 you will learn all the available features of the product, as well as information on its operation. The information that you get Optoma Technology EP725 will certainly help you make a decision on the purchase.
If you already are a holder of Optoma Technology EP725, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Optoma Technology EP725.
However, one of the most important roles played by the user manual is to help in solving problems with Optoma Technology EP725. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Optoma Technology EP725 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
