Instruction/ maintenance manual of the product OP1022WTDS Optoma
Go to page of 60
Digital Signage To u c h P a n e l User Manual.
Table of Contents i Safety Instructions iv Power Cord & Adapter Warnings ............................................. iv Technical Support ...................................................................... v Declaration of Conformity vi WEEE Notice .
Table of Contents ii Picture ...................................................................................... 20 Play Mode ................................................................................ 21 Schedule ..................... .......
Table of Contents iii Video and Audio Specifications .................................. .................... 41 Software Layout Utility ........................................................... 43 Layout Template ....................................
Safety Instructions & Warranty iv Safety Instructions Use the following safety guidelines to help protect yourself and your Digital Signage T ouch P anel (DSTP). • Do not attempt to service DSTP yourself. A lways follow installation instructions closely .
Safety Instructions & Warranty v • 115 V/60 Hz in most of North an d South America and some Far Eastern countries such as South K orea and T aiwan. • 100 V/50 Hz in ea stern Japan and 10 0 V/60Hz in wester n Japan. • 230 V/50 Hz in most of Europe, the Middle East, and th e Far East.
Declaration of Conformity vi Declar ation of Conformity CE Marking This product complies with the pr incipal elements of the safety objectives of EMC Directive (2004/108/EEC) and the Low V oltage Directive (2006/95/EC) issued by the Commission of the European Community .
Introduction 1 Introduction Overv iew Thank you for purchasing your Digital Signage T ouch P anel (DSTP). DSTP is a powerful digital engine for high quality video and graphics. It can perform live broadcasts, video/ audio files, and display tick ers. Y ou can easily control, deliver , and receive multimedia content through a network.
Introduction 2 Fe a t u r e s • High P erformance. 1680 x 1050 output with hardware video/audio decoder , supports 2 video/ 2 graphic/ 2 tickers. • Sleek design. The sleek panel design makes it easy to mount and install. • Network-Manageable. DSTP can connect remotely to a local or wide area network via wired, wireless, or 3G connections.
Introduction 3 P ack age Content When unpacking, please ensure the following items are included. If any items are missing or damaged, please contact your retailer .
Introduction 4 Connectors V iew No. Item Description 1 P ower socket Use to connect to the power adapter . 2 LAN Use to connect to an Ethernet network. 3 SD card slot Use to insert the SD card. 4 P ower button P ress to turn DSTP on or o ff. 5 LED indicator Indicates the status of DS TP .
Introduction 5 Remote Control DSTP comes with a remote co ntrol to access menu settings. The diagram and table below show the keys and basic operation of the remote control. No, Item Description 1 Ke y p a d P ress the keys to enter numeric values. 2 Arrow keys P ress to navigate through menu selections.
Getting Started 6 Getting Started Setting up New SD Card Content Y ou need to set up th e contents of the SD card before using it for the first time. The sample media files and system drivers (libxxx.img) for the SD card content can be found in the included CD-ROM.
Getting Started 7 In order to av oid update function failure, do not lock the SD card. Remov ing the SD C ard 1. Unscrew the SD card protector from the case. 2. Gently push the SD card in until it clicks to release the lock. 3. R emove the card. 4. Screw the SD ca rd protector back.
Getting Started 8 Making Connections Connecting the P ower 1. Connect the power cord to the adapter . 2. Connect the power adapter to the power socket of DSTP . 3. Plug the power co rd to a live outlet. Connecting USB dev ices Y ou can connect a USB flash dr ive using the USB port for content file updates or system upgrades.
Getting Started 9 Connect one end of an Ethernet cable to the LAN port on DSTP and the other end to a ne twork hub or wall soc ket. Connecting a DVD player or a TV Set-T op Box For vivid media content, you can play back video files directly from your DVD player or a TV set-top box.
Getting Started 10 Media content must be edited firs t using InfoSAP T ouch (see the InfoSAP T ouch user manual for more details). Connecting an Audio In Component DSTP supports Audio-in component from devices such as a DVD player or a set-top box. Connecting Speakers For a more attention-grabbing display , DSTP is capable of playing audio files.
Getting Started 11 P owering On Before powering on DSTP , insert an SD card into the SD card slot. After performing the necessa ry connections, you are now ready to power on DSTP . P ress on the remote control. The LED indicator lights green to denote power .
Getting Started 12 LED Indicator The LED indicator indicates the status of DSTP . LED Indicator Status Green Po w e r i s o n Re d On standby mode Green, blinking P r eparing to stan dby LED Indicato .
Menu 13 Menu The main menu consists of menu options for DSTP . P ress on the remote control to activate the main menu. • Press the Up/Do wn arrow key s to move through the menu . • Press to enter a menu item. • T o exit a menu, press . • T o exit the main menu, press or .
Menu 14 T o set the date and time: 1. P ress > DA TE/TIME . 2. Use the arrow keys on the remote control to move through the selections. 3. P ress the keypad to enter numeric values.
Menu 15 P ress > NETWORK . DHCP or Static IP 1. Select the connection type: • DHCP : T o acquire network configuration automatically . • Static IP: Enter IP , Netmask , Gateway , and DNS manually . 2. Use the arrow keys on the remote control to move through the selections.
Menu 16 T o do the following steps to establish a wireless connection: 1. Create a configuration file using the Wireless/3G Config Setting tool. (See “ Wireless/3G Config Setting” on page 36 ). 2. Copy the configuration file to a USB flash drive. 3.
Menu 17 8. When prompted, select Ye s to confirm network by wireless. USB 3G Modem Select USB 3G Modem to connect to the network via dial-up connection. T o do the following steps: 1. Create a configuration file using the Wireless/3G Config Setting tool.
Menu 18 Progr am The Progr am menu lists the program co ntents in the SD card. The programs are listed in order of filename. Y ou can select a program to preview . T o preview a program: 1. P ress > PROGRAM . 2. Use the up and down keys to move through the program list.
Menu 19 Ti m e r Y ou can set the timer settin gs of DSTP in the Ti m e r menu. Y ou can: • Enable daily timers • Set timers to power on or power off your device • Set timers to turn the video on or off 1. P ress > TIMER . 2. Use the arrow keys to move through the options.
Menu 20 1. P ress > LANGUAGE . 2. Use the arrow keys to move through the options. 3. P ress to select the language. Picture In the Picture menu, you can adjust th e contrast, brightness, and saturation settings 1. P ress > PICTURE . 2. Use the up and down keys to move through the options.
Menu 21 Play Mode Y ou can select the play mode in the Play Mode menu. 1. P ress > PLA Y MODE . 2. Use the arrow keys on the remote control to move through the options. 3. P ress to highlight an option. 4. Select Apply to apply the mode. Do not unplug the USB flash drive or the SD card during Play Mode.
Menu 22 Network Streaming Select Network Streaming to stream video files through the network . Configure the streaming se rver by entering the server IP and Po r t address. Slide Show Select Slide Show to play a slide show of image files from the USB flash drive.
Menu 23 When you power on DSTP in slide show mode, your device checks the USB flash drive and read image files to start the slide show . The following image files are supported: BMP , JPEG, PNG. The images are resized to full screen while retaining the aspect ratio.
Menu 24 Memory Card (SD Card) Y ou can see the capacity of your SD card and delete all stored content in the Memory Card (SD card) menu . P ress > MEMOR Y CARD (SD card). Choosing “Delete All Conten t Files” dele tes all content files in your SD card.
Menu 25 Pr e s s > IR CONTROL . T o lock the remote control 1. Highlight IR Lock using the arrow keys on the remote control. 2. P ress to select. 3. Select Apply . 4. A message appears to confirm disabling of remote control. Select Ye s to confirm.
Menu 26 of DSTP , the Hidden Menu is not displayed on the screen unless you activate it. There are two levels of Hidden Menu: simple and complex. In the simple hidden menu, only the system driver can be upgraded. In the complex hidden menu, you can upgrade the system driver , loader , kernel, and splash.
Menu 27 Upgr ade Pr e s s > UPGRADE . Use the Upgr ade menu to upgrade system files in DSTP . DSTP contains four files: System driver , Loader , K ernel, and Splash. T o select an item, use the arrow keys on the remote control to highlight an item, then press .
Menu 28 Please refer to the picture below . 3. Select the system driver , then press . 4. When the message appears on the screen, select “Y es” and press to start. 5. DSTP starts upgrading and displays a message. 6. When the upgrade is complete, a message appears on screen and DSTP reboots.
Menu 29 Auto Content Update Select Auto Content Update to enable or disable daily auto content update. Once enabled, the following detail configuration is displayed: • FTP server/F older : The content directory on FTP . • User : The user name to login to FTP .
Menu 30 All settings are erased if you select Factory R eset. Change P assword A password is required for web access. T o set up a password, select Change P assword . The password must be a 4 to 8-character numeric string. 1. Enter a new password. 2. R e-enter to confirm the new password.
How to Use the Digital Signage Processor 31 How to Use the Digital Signage Processor Playing media files on the SD card 1. Insert an SD card into the SD card slot. 2. T urn on DSTP . The device boots up. 3. If there is a playlist in the SD card, DSTP plays the program content.
How to Use the Digita l Signage Processor 32 Updating Content DSTP supports three meth ods for content update: • USB flash drive update • Manual rewrite of SD card by PC • R emote rewrite through LAN • R emote rewrite through W AN The illustration below shows the different content update methods.
How to Use the Digital Signage Processor 33 USB Flash Drive Updat e A media folder is required for a USB flash drive update. It must contain the follo wing three files: • Playlist file (.lis) • P rogram files (.xml) • Media folders (named the same as the .
How to Use the Digita l Signage Processor 34 Before you start to cop y , check to make sure your SD card contains a folder named “media”. If not, create “med ia” folder . Now , manually copy the files to your SD card’ s “media” folder us ing your PC’ s copy/paste functions.
Specifications 35 Specifications Internal Stor age DSTP uses an SD card for internal storage. The SD card must have only one F A T32 partition. DSTP supports SD cards with capacities up to 16GB. SD card structure The SD card must have the following files and folders: 1.
Specifications 36 Wireless/3G Config Setting T o connect to the network via wireless or 3G connection, install the Wireless/3G Config Se tting tool on yo ur PC and use it to create the configuration file. T o Install Wireless/3G Config Setting 1. Download the tool from the manufacturer’ s website.
Specifications 37 5. Click Next to continue. 6. When done, click Close ..
Specifications 38 T o Create Wireless Configuration File 1. Insert a USB flash driv e into the PC’ s USB port. 2. On your PC, click Start > All Progr ams > WirelessConfigSetting > WirelessConfigSetting . 3. Click the Wireless tab. 4. On Wireless Status , select On .
Specifications 39 T o Cre ate 3G Configuration File 1. Insert a USB flash driv e into the PC’ s USB port. 2. On your PC, click Start > All Progr ams > WirelessConfigSetting > WirelessConfigSetting . 3. Click the 3G tab. 4. On USB Modem Status , select On .
Specifications 40 Supported Image F ormats DSTP supports BMP , PNG, and JPE G image file formats. • BMP (*.bmp): 24-bpp, R8-G8-B8 • PNG (*.png): 24-bit RGB • JPEG (*.
Specifications 41 Video and Audio Specifications 1. Windows M edia Video 9 (WMV3) • Supports MP@HL (Main Pr o f i l e , H i g h L e v e l ) • Does not support CP (Complex P rofile) • Does not su.
Specifications 42 • Supports AP@L3 (Advanced P rofile, L3 Level) • Does not support CP (Complex P rofile) • Does not support interlaced mode • Does not support sprite mode • Does not support.
Specifications 43 • Supports 16-bit and 24-bit samp les • Supports sampling rates of 32, 44.1 and 48 kHz 8. AAC (MPEG-4 AAC) • Supports LC (Low Complexity profile) • Supports bit rates up to 384kbps • Supports up to 5.1 channels • Supports 16-bit and 24-bit samp les • Supports sampling rates of 32, 44.
Specifications 44 Layout T emplate DSTP supports different types of layouts. Following are some examples: • Image only • Image + T icker • Video + T icker • Video + Image + T icker • P ortrait Y ou can also manually add layers. Image Only In an Image only layout, images are shown on screen in Loop play mode.
Specifications 45 Image + T icker In an Image + T icker layout, th ere is no character quantity limitation. The ticker , (in Unicode characters), runs from right to left, or can have sentences scrolling upward or downward. Images and the ticker can be overlapped.
Specifications 46 Video + Image + T icker A layout can contain a video file, an image and a ticker . The video file can be from an SD card, composite input, or network stream. If you add a n audio file and a video fil e + image+ticker , the audio source i s set to audio aut omatically .
Specifications 47 • If user add an audio file, th e audio source will be se t to audio automatically . • Before you start to copy , check to ma ke sure your SD card contains a folder nam ed “media”.
Specifications 48 The processor can play weat her from RSS, only Y ahoo W eather .rss (http://weather . yahoo.com) is supported. V ertical T icker only supports Chi nese, Japanese and K orean. Software Limitations T o ensure the output quality of DSTP , take note of the following software limitations.
Specifications 49 P rogram file (.XML) • The maximum source number in an item group is 100. • The maximum number of item groups in a frame is 100. • The maximum program name length is 128 bytes. Playlist file (.LIS) • The maximum number of program and control commands in a playlist file is 500.
Specifications 50 Gamma and Luminance Characteristics Gamma and luminance settings can be adjusted using the display function. DSTP is adjusted to display normally on a grayscale test pattern. V ideo Input There are two video input modes: Normal mode and Full Screen mode.
Specifications 51 Hardware Specifications Processo r CPU: Sigma SMP863X 8 MB Flash memory 256 MB SDRAM Video Output Resoluti on 1680 x 1050 / 60Hz Vide o In pu t Connector: Composite Audio Output Analog stereo line out Line out L/R x 1, Stereo 3.5 mini jack Audio Inp ut Line in L/R x 1, Stereo 3.
Troubleshooting 52 T roubleshooting Error Messages This section lists common error messages that may arise during the use of DSTP , and provides answers and solutions to these errors. Error Message Solutions “It failed to access the SD card.” • Check if the SD card is inserted.
Troubleshooting 53 FA Q ’s This section lists some frequent ly asked questions (F AQ) and the answers to these problems. Question Answer Why can’t I view my video files? Y ou may be trying to view a video file t hat is not supported by DSTP . See “Supported V ideo and Audio Formats” on page 40.
An important point after buying a device Optoma OP1022WTDS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Optoma OP1022WTDS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Optoma OP1022WTDS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Optoma OP1022WTDS you will learn all the available features of the product, as well as information on its operation. The information that you get Optoma OP1022WTDS will certainly help you make a decision on the purchase.
If you already are a holder of Optoma OP1022WTDS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Optoma OP1022WTDS.
However, one of the most important roles played by the user manual is to help in solving problems with Optoma OP1022WTDS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Optoma OP1022WTDS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
