Instruction/ maintenance manual of the product RFR-5 Onkyo
Go to page of 12
Thank you for purchasing the Onkyo RF Receiver. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new RF Receiver.
2 Care From time to time you should wipe the front and rear panels and the cabinet with a soft cloth. For heavier dirt, dampen a soft cloth in a weak solu- tion of mild detergent and water, wring it out dry, and wipe off the dirt. Following this, dry immediately with a clean cloth.
3 Intr oduction About the RFR-5 Most remote controller systems have to be operated by pointing the remote controller directly towards a device. Any obstacle between the remote controller and the device disturbs the operating signal.
4 Possible Set-ups The RF Receiver can be used in several situations: ■ Your devices can be remotely controlled while the RF Receiver is placed in line of sight (situation A). ■ The RF Receiver controls devices placed in an adjacent room (situation B).
5 Installation The following components should be present: RF Receiver, power adapter, 3 IR emitters, Mono cable and 4 screws. Before you install the RF Receiver, you should decide which of the set-ups described on p. 2 apply to your needs. It is recommended to read through the entire User Guide.
6 Mounting The RF Receiver can be mounted to a piece of furniture using the included mounting plate and the 4 screws. Take into account the range and the working angle of the IR blaster as explained on p. 4. Also make sure to place the RF Receiver in a central position aimed directly at your devices.
7 Installation Connecting the Power Adapter When connecting the power adapter it is recommended that you plug the adapter into the RF Receiver before you plug it into the socket. When connected you will see a red LED on the RF Receiver. Note: To avoid interference, the adapter cable should not be placed directly above or below the RF Receiver.
8 Installation Settings As the RF Receiver “ communicates ” with the Chad Remote Controller, you have to set the same Receiver ID (identity) on both appliances.
9 T r oub leshooting Devices do not respond properly ■ Check if the power adapter is connected and the red LED is on. ■ Check if the ID and channel numbers on the RF Receiver match with the ID and channel numbers on the Chad Remote Control (see p.
10 Red LED (continuously on when powered, blinking during RF reception) 16 IDs and 4 CHs 4 outputs for IR emitters Possibility to have multiple RF Receiver in one home not interfering Positioning: freestanding, mounted horizontally or hanging up side down 4.
11 Memo.
Sales & Product Planning Div . : 2-1, Nisshin-cho , Neyaga wa-shi, OSAKA 572-8540, JAP AN T el: 072-831-8111 F ax: 072-833-5222 ONKY O U.S.A. CORPORA TION 18 P ark W ay , Upper Saddle River , N.J. 07458, U.S .A. T el: 201-785-2600 F ax: 201-785-2650 http://www .
An important point after buying a device Onkyo RFR-5 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Onkyo RFR-5 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Onkyo RFR-5 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Onkyo RFR-5 you will learn all the available features of the product, as well as information on its operation. The information that you get Onkyo RFR-5 will certainly help you make a decision on the purchase.
If you already are a holder of Onkyo RFR-5, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Onkyo RFR-5.
However, one of the most important roles played by the user manual is to help in solving problems with Onkyo RFR-5. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Onkyo RFR-5 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
