Instruction/ maintenance manual of the product R-805X Onkyo
Go to page of 52
FM STEREO/AM TUNER AMPLIFIER R-805X Instruction Manual Before using Connections Preparations Operation Other Information English STANDBY / ON DISPLAY PHONES MEMORY CLEAR FM MODE PRESET TUNING R-805X F.
2 Important Safeguar ds 1. Read Instructions – All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions – The safety and oper- ating instructions should be retained for future reference.
3 14. Outdoor Antenna Grounding – If an out- side antenna or cable system is connected to the appliance, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges.
4 Pr ecautions 1. W arranty Claim Y ou can find the serial number on the rear panel of this unit. In case of warranty claim, please report this number . 2. Recording Copyright Recording of copyrighted material for other than personal use is illegal without permis- sion of the copyright holder .
5 For U.S. model Note to CA TV system installer: This reminder is provided to call the CA TV system installer’ s attention to Article 820-40 of the NEC, ANSI/NFP A 70, which provides guidelines for .
6 Main Featur es • 20 W atts per channel into 4 ohms DIN • Low impedance drive discrete output stage • Accoustic Presence • RDS (Radio Data System) PS only (Euro- pean model) • FM/AM random 30 Stations Preset T uning • Timer Play (Weekday ,Weekend),Sleep & Timer Rec • Automatic Scan T uning (FM only) • Subwoofer Pre Out (U.
7 T able of contents Before using Supplied accessories ........................................................................................................... .6 Connections Connecting to the ONKYO Separate Collection Series components ...........
8 Connecting to the ONKYO Separate Collection Series components This section introduces you to the other Separate Collection Series system components and their convenient system functions, followed by connecting instructions. The following Separate Collection Series components are commercially available: • K-505X .
9 Combination example 1 Select the CD player C-705X (or CD changer C-707CH), CD recorder , and stereo cassette tape deck K-505X in addition to this unit.
10 Connecting to the ONKYO Separate Collection Series components Before connecting • Do not connect the unit’ s AC power cord (mains lead) to a wall outlet (the mains) until you have completed all the other connections, including and AC OUTLET connections on page 12 and “Connecting speaker systems” on page 16.
11 Connections for combination example 1 Connections for combination example 2 FM STEREO/AM TUNER AMPLIFIER ( PLAY ) ( REC ) ( PLAY ) ( REC ) OUT IN L R ( REC ) ( PLAY ) OUT MD CDR TAPE CD IN LINE/DVD PROCESSOR OUT IN OUT IN REMOTE CONTROL L R L R L R AM FM 75 ANTENNA R L AC OUTLET SPEAKERS AC230V 50Hz SWITCHED 100W MAX.
12 Connecting to the ONKYO Separate Collection Series components Before connecting • The hookups on page 11 is needed in addition to the (for remote control operations) and AC OUTLET (for power supply to each component) hookups on this page. • Each component has two connectors.
13 Connecting to components other than the Separate Collection Series Before connecting • Do not connect the AC power cord (mains lead) to the wall outlet (the mains) until you have completed all the other connections including the sound processor connections on the next page, the connections on page 15, and the speaker connections on page 16.
14 Connecting to components other than the Separate Collection Series Before connecting • If your subwoofer isn’t equipped with an amplifier , connect a separate amplifier to the unit first, then connect the subwoofer to that amplifier .
15 If your other components are made by ONKYO and those components are equipped with connectors, you can control the -connected components with the supplied remote control- ler . Before connecting • The unit must be connected in the system hookups for control operations.
16 Connecting speaker systems Before connecting • The load impedance of each speaker must be at least 4 ohms. • Do not use unnecessarily long or extremely thin speaker cords. Otherwise, the DC resis- tance of the speaker cords may become too high, lowering the damping factor and causing the sound quality to deteriorate.
17 Antenna connections Assembling the AM loop antenna Assemble the loop antenna as shown in the illustration. Connecting the antenna cable Connecting the AM loop antenna The AM loop antenna is for indoor use only . Set it in the direction and position where you receive the clearest sound.
18 Antenna connections FM indoor antenna The supplied FM antenna is for indoor use only . Move the antenna in various directions until the clearest signal is received. Fix it with push pins or similar implements in the position that will cause the least amount of distortion.
19 Connecting the 300 ohm ribbon wire: Connecting the coaxial cable: 1. With your fingernail or a small screw- driver , press the stoppers outward and remove the cover . 2. Remove the transformer wire A from slit B and insert it into slit C. 3. Prepare the coaxial cable as shown in the diagram.
20 Connecting the AC power cor d (mains lead) 1 Connect the AC power cord (mains lead) to the wall outlet (the mains). “– –:– –” appears on the display . (illustration is 230 V models) 2 Press the ST ANDBY/ON button. The indicator of the selected input source lights up.
21 Pr eparing the remote contr oller 1 Remove the battery compartment cover by pressing and sliding it away from the remote contr oller unit. 2 Insert two AA-size batteries into the battery compartment. Carefully follow the polarity diagram (positive + and negative - symbols) inside the battery compartment.
22 Setting the Clock The ”ACCUCLOCK“ features an automatic clock adjusting function automatically sets the clock time by means of RDS broadcast signals. • The “ACCUCLOCK” feature is available only on the European model, and only in areas where RDS broadcasts are available.
23 If you wish to know which RDS station has been used to set the clock by ACCUCLOCK, or to use a different RDS station signal to set the clock, follow the steps below: 1 Press the TIMER button repeatedly until “ADJUST” is selected on the dis- play , then press the ENTER button.
24 Setting the Clock 1 Press the TIMER button until “AD- JUST” is selected on the display , then press the ENTER button. The day of the week will flash on the dis- play . Non-U.S. and non-Canadian models: “AUTO” or “MANUAL” appears on the display in Standby mode.
25 4 Press the ENTER button. The clock will start operating. Tip Switching between the 24 hour and 12 hour display settings: 1. Pr ess the TIMER button repeatedly to dis- play “24H/12H.” 2. Pr ess the ENTER button. 3. Use the UP π or DOWN † button to select 24H (24 hour display) or 12H (12 hour display).
26 Choosing the r equired sour ce 1 T ur n the INPUT selector clockwise or counterclockwise until the input indi- cator of the source you wish to listen to lights. The indicators light in the following order: e.g. The CD player is selected. Or press the INPUT button on the remote controller .
27 Adjusting the sound Adjusting the bass: 1. Pr ess the TONE button repeatedly until “BAS” is displayed. 2. Pr ess the UP π or DOWN † button to adjust the bass. The bass can be adjusted from –10 to +10. 3. Pr ess the ENTER button to return to the previous display .
28 Muting/Listening with the headphones Press the MUTING button on the r emote controller to mute the sound. The MUTING indicator flashes on the display .
29 Recor ding Before r ecording Refer to the instruction manuals of the related components for detailed recording operations. Note Do not turn the INPUT selector during recording. 1 T ur n the INPUT selector clockwise or counterclockwise until the input indi- cator of the source you wish to record from lights.
30 Receiving stations 1 Select FM or AM using the INPUT selector or the FM or AM button on the remote controller . 2 Use the TUNING † or π button to change the frequency . The indoor antenna should be installed on a wall or other surface in the position which gives the best reception.
31 Y ou can store your favorite stations in the preset memory . Follow the procedure below: 1 Select FM or AM using the INPUT selector , or FM or AM button on the remote controller . 2 Use the TUNING † or π button to select the frequency of your favor - ite station.
32 Receiving stations When you tune in a stereo FM station, the STEREO indicator lights up if the signal is suf- ficiently strong. If the signal is weak, you can still listen to the station in mono mode. In this case, tune in as follows. 1 Press the FM MODE button.
33 Naming a pr eset station Y ou can name the preset stations so that the name, instead of the frequency , appears on the display when you press the DISPLA Y but- ton.
34 Naming preset stations 5 When you finish entering all neces- sary characters, press and hold down the DISPLA Y button for more than two seconds to complete the opera- tion. Note If you have not pressed any button for 16 seconds during the procedure, the operation will complete automatically .
35 4 Use the PRESET √ or ® button to change the character . 5 Press the MEMOR Y button to store the character . 6 Press and hold down the DISPLA Y but- ton for more than two seconds to complete the operation. Follow the procedure below to delete the name of the selected preset station.
36 Receiving RDS (Eur opean models only) RDS reception is available only on the Euro- pean model, and only in areas where RDS broadcasts are available.
37 Using the timer The R-805X features a T imer function that enables you to start playing or recording a specified component at a specified time. T o use this function, you need to connect this unit to other components via REMOTE CONTROL jacks.
38 Using the timer Y ou can define or change which day is WEEK- DA Y or WEEKEND. Y ou can also define the day as both WEEKDA Y and WEEKEND in order to program two timer settings on the same day .
39 Before using the timer for listening to or recording broadcast programs, you need to store the preset stations. (Refer to “Receiv- ing stations” on page 30, 31 for information how to preset stations.) 1 Press the TIMER button repeatedly until “WEEKDA Y” or “WEEKEND” is dis- played, and press the ENTER button.
40 Using the timer 5 Press the ST ANDBY/ON button on this unit to set the Standby mode. Notes • The clock of this unit must be set correctly before programming the timer . • Make sure that the specified source com- ponent is connected to this unit, and that the CD, MD, CDR, or cassette tape has been inserted into the appropriate com- ponent.
41 3 Press the UP π or DOWN † button to set the ON time, and press the ENTER button. Notes • Y ou can also use the number buttons instead of the UP π or DOWN † button to set the desired recording ON and OFF time. T o do so, refer to step 3 on page 24 and select the 24-hour display .
42 Using the timer 7 Press the ST ANDBY/ON button on this unit to set the Standby mode. Notes • Since muting is automatically turned on when the timer is used to record, the sound cannot be heard during recording. T o monitor recording, press the MUTING button on the remote controller to cancel muting.
43 The Sleep function can be performed only by using remote controller . The SLEEP timer automatically sets the entire system to Standby mode after a specified period of time. 1 Start playing something you would like to listen to. (CD, tape, MD or radio broadcast).
44 T r oubleshooting If you have any problems with the unit, please check the troubleshooting table below first. For any problems not covered in the table, please consult your nearest ONKYO authorized service center . Symptom Cause Remedy The unit doesn’t turn on.
45 • Excessive electrical interference may temporarily render this system’ s sensitive microcom- puter inoperable. If this happens, unplug the system for at least five seconds. Symptom Cause Remedy AM stations cannot be received. • AM loop antenna is not attached.
46 Specifications Amplifier Section Power output 20 watts per channel, min RMS, at 4 ohms, both channels driven 1 kHz, with no more than 0.6% THD 15 watt per channel, min RMS, at 8 ohms, both channels driven 1 kHz, with no more than 0.
47 General Clock precision monthly error: +/-30 seconds (at 25 degrees Celsius) Power supply AC 120 V , 60 Hz AC 230 V , 50 Hz Power consumption 61 W (120 V , 60 Hz) 54 W (230 V , 50 Hz) Dimensions (W X H X D) 205 X 91 X 302 mm 8-1/16" X 3-9/16" X 11-7/8" Weight 3.
48 Index to parts and contr ols For more information about buttons, turn to the page number in the brackets [ ]. Front panel STEREO MUTING MIN kHz MHz MONO PM RDS AM AUTO TIMER W.
49 • Y ou can control the other -connected components with the supplied remote controller . • The remote controller buttons operate in the same way as the buttons on each component with the same indication. • For actual operations, please refer to the Instruction Manual for each component.
50 • Use the following buttons to control components that are connected to the - system. Remote controller CLOCK SLEEP EFFECT GRAPHIC EQ MODE 123 456 789 10 / 0 - - / - - - VOLUME PRESET F MA M PLAY.
51 MEMO.
E http://www.onkyo.co.jp/ HOMEP AGE SN 29342838B Printed in Japan I0104-3 Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8111 Fax: 072-833-5222 http://www.onkyo-intl.com ONKYO U.S.A. CORPORATION 18 Park Way, Upper Saddle River, N.
An important point after buying a device Onkyo R-805X (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Onkyo R-805X yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Onkyo R-805X - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Onkyo R-805X you will learn all the available features of the product, as well as information on its operation. The information that you get Onkyo R-805X will certainly help you make a decision on the purchase.
If you already are a holder of Onkyo R-805X, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Onkyo R-805X.
However, one of the most important roles played by the user manual is to help in solving problems with Onkyo R-805X. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Onkyo R-805X along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
