Instruction/ maintenance manual of the product HTP-L50 Onkyo
Go to page of 10
Home Theater Spea k er System HTP-L50 Instruction Manual Thank you for purchasing the Onkyo home theater speak er system. Please read this manual thoroughly before using it. F ollo wing the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your ne w home theater speaker system.
2 PORTABLE CART WARNING S3125A Impor tant Safeguar ds 1. Read Instructions – All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference.
3 Precautions 1. Recording Copyright Recording of copyrighted material for other than personal use is illegal without permission of the cop yright holder . 2. A C Fuse The fuse is located inside the chassis and is not user-serviceable. If power does not come on, contact your Onk yo authorized service station.
4 Contr ol positions and names Front panel The HTP-L50 is a 5.1-channel speaker package that consists of five satellite speakers and one subwoofer with an internal amplifier.
5 Speaker placement ■ Layout of your speaker system Satellite speakers • Front left/right speakers and center speakers These three speakers should be placed in front of the listener.
6 For safety reasons, do not turn on any devices or components until you have completed all wiring procedures. ■ Connecting the satellite speakers Note: The nominal impedance of this speaker system is 6 Ω . Use only amplifiers capable of handling this impedance.
7 ■ Connection to amplifier’s (receiver’s) speaker terminals 1. Using speaker cables and the speaker cables that came with your speakers, connect the SL-105’s SPEAKER LEVEL INPUT terminals and the amplifier’s speaker terminals. 2. Connect the Right and Left speakers to the SL-105’s SPEAKER LEVEL OUTPUT terminals.
8 Tr oubleshooting guide Cause • The power plug is not fully inserted. • The OUTPUT LEVEL knob is set to the MIN level. • Pin-connector cable(s) are disconnected at the LINE INPUT jacks. • Speaker cables are not properly con- nected to the SPEAKER LEVEL INPUT terminals.
9 Specifications ■ Subwoofer SL-105 Type Bass-reflex with built-in power amplifier Use For superbass-range reproduction Frequency response 30-200 Hz (at maximum cross- over frequency) Crossover frequency 50-200 Hz (variable) Maximum output power 60 W Input impedance 4.
http://www.onky o.co.jp/ HOMEP AGE SN 29343437 I0208-1 Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8111 Fax: 072-833-5222 http://www.onkyo-intl.com ONKYO U.S.A. CORPORATION 18 Park Way, Upper Saddle River, N.
An important point after buying a device Onkyo HTP-L50 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Onkyo HTP-L50 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Onkyo HTP-L50 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Onkyo HTP-L50 you will learn all the available features of the product, as well as information on its operation. The information that you get Onkyo HTP-L50 will certainly help you make a decision on the purchase.
If you already are a holder of Onkyo HTP-L50, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Onkyo HTP-L50.
However, one of the most important roles played by the user manual is to help in solving problems with Onkyo HTP-L50. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Onkyo HTP-L50 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
