Instruction/ maintenance manual of the product 29344937 Onkyo
Go to page of 100
E n 7.1ch Home Theater System HT-S6200 A V Receiv er (HT -R670) Speaker P ackage (HTP-670) Front Speak ers (SKF-670) Center Speaker (SKC-670) Surround Speak ers (SKR-670) Surround Back Speak ers (SKB-670) Po were d Subw oofer (SKW -770) Dock f or iP od (UP-A1) Instruction Manual Thank you for purchasing an Onkyo 7.
2 Impor tant Safety Instructions 1. Read these ins tructions. 2. Ke ep these instru ctions. 3. Heed all warnings. 4. Follo w all instructi ons. 5. Do not use this apparatus near w ater . 6. Clean only with dry cloth. 7. Do not block an y ventil ation openings.
3 Precautions 1. Recording Copyright —Unless it’ s for personal use only , recording cop yrighted material i s ille gal without the permission of the copyright holder . 2. A C Fuse —The A C fuse inside the unit is not user- serviceable. If you cannot turn on the unit, contact your Onkyo dealer .
4 Speaker Precautions Placement • The subwoofer cabinet is made out o f wood and is therefore sensiti v e to extreme te mperatures and humidity , do not put it in lo cations subject to direct sunlight or in humid places, such as near an air condi- tioner , humidif ier , bathroom, or kitchen.
5 P ac kage Contents —Continued *I n catalogs a nd on packagi ng, the let ter at the end of the pr oduct name indicate s the color. Specifications and operatio n are the same regardless of colo r . Speaker P ac ka ge HTP-670 Speaker cable for fr ont speakers and center speaker Front speaker s 11 ft (3.
6 Contents * T o reset the A V r eceiv er to its fa ctory defau lts, turn it on and, while hol ding down the [VCR/DVR] button, press the [ON/ ST ANDBY] b utton (s ee page 93). Intr oduction Important Safety Instructions ...............................
7 Features Amplifier • 130 W atts/Channel @ 6 ohms • 160 W atts/Channel @ 6 ohms (JEIT A) • WRA T -Wide Range Amplif ier T echnology • High-Current Lo w-Impedance Dri v e • Optimum Gai n V olume Circuitry • H.
8 Features —Continued • Easily links all iPhone, iP od T ouch (1G, 2G), iPod Classic, iPod (4G, 5G), iP od nano (1G, 2G, 3G, 4G), iPod mini with Onkyo A/V Systems *1 Manufac tured under lic ense from Do lby Lab oratories. “D olby” , “Pro Logic” an d the double -D symbol are tr ademarks of D olby Laborato ries.
9 Multir oom Capability Y ou can use two speake r systems with this A V receiver —a surround-sound speak er system (up to 7.1 channels) in your main listening room, a stereo speaker system in a seco nd room, or Zone 2, as we call it. An d, you can select a differ ent audio source for each room.
10 Fr ont & Rear P anels The actual front panel has v arious logos printe d on it. They are not sho wn here for clarity . The page numbers in parentheses show where you can f ind the main explanation for each item. a ON/ST ANDBY button (40) Sets the A V receiv er to On or Standby .
11 Fr ont & Rear P anels —Contin ued For detaile d information, se e the pages in parentheses. i GAME button (61) Selects the listening mode s intended for use with video games. j DIMMER button (51) Adjusts the display brightness. k MEMOR Y button (56) Used when storing or deleting radio presets.
12 Front & Rear P anels —Continued a DIGIT AL IN CO AXIAL 1 and 2 These coaxial digital audio inputs are for connecting components with a coaxial digital audio output, such as a CD player or D VD/BD player . They’ re assignable, which means you can assign each one to an input select or to suit your setup.
13 Fr ont & Rear P anels —Contin ued j u REMO TE CONTROL This u (Remote Interactiv e) jack can be connected to the u jack on another u -capable Onkyo component for remo te and system control. To u s e u , you must make an analo g audio connection (RCA) between th e A V receiv er and the other component, e ven if they are connected digitally .
14 Speaker P a c kage For detailed information, se e th e pages in parentheses. ■ Front ■ Rear a ST ANDBY/ON indicator W ith the Auto Standby function, the SKW -770 automatically turns on when an input signal is detected in Standby mode . Wh en there’ s no input signal for a while, th e SKW -770 automatically enters Standby mode.
15 Speaker P ac kage —Continued ■ Rear a Ke yhole slots These keyhole slots can be used to wa ll-mount the speaker . See page 21 for mounting instructions. b Speaker terminals These push terminals are for connecting the speaker to the HT -R670 with the supplied speaker cables.
16 Remote Contr oller Notes: • If the remote controller doesn’ t work reliably , try replacing the batteries. • Don’ t mix new and old batteries or dif ferent types of batteries. • If you intend not to use th e remote controller for a long time, remove the batteries to prevent damage from leakage or corrosion.
17 Remote Controller —Contin ued For detaile d information, se e the pages in parentheses. a ON/ST ANDBY button (40) Sets the A V rece iv er to On or Standb y . b REMO TE MODE/INPUT SELECT OR buttons (49, 58, 86–92) Selects the remote contro ller modes and the input sources.
18 About Home Theater Thanks to the A V receiv er’ s superb capabilities, you can enjoy surround soun d wi th a real sense of movement in your ow n home—just like being in a movie th eater or concert hall. Y o u can enjoy D VDs featuring Dolb y Digital or DTS.
19 Connecting the A V receiver Speaker Config uration For 7.1-channel surround-s ound playback, you need se ven speakers and a po wered subwoofer . The following table shows which channels you should use based on the number of speakers you ha ve.
20 Connecting the A V receiver —Contin ued Connecting the Speaker Cab les T erminal posts Push terminals The following illustration sh ows wh ich speaker should be connected to each pair of terminals for up to 7.1-channel playback. If you’ re using only one surround back speak er , conne ct it to the po wer amp lif ier’ s left terminals.
21 Connecting the A V receiver —Continued The speakers can easily be w all mounted by using the keyhole slots. T o mount the front or surround speakers vertically , use the keyhole slot sho wn to hang each speak er on a screw that’ s securely scre wed into the w all.
22 Connecting the A V receiver —Contin ued The FR ONT L/R and SURR B A CK L/R terminal posts can be used with front speakers and surround back speakers respecti v ely , or bi-amped to pro vide separate tweeter and woofer feeds for front speak ers, providing improv ed bass and treble performance.
23 Connecting the A V receiver —Continued This section explains ho w to connect the supplied indoor FM antenna and AM loop ante nna, and how to connect commercially a v ailable outd oor FM and AM antennas. The A V receiv er won’ t pick up any radio signals without any an tenna connected, so you must connect the antenna to use the tuner .
24 Connecting the A V receiver —Contin ued Connecting an Outdoo r FM Antenna If you cannot achie ve good reception with the supplied indoor FM antenna, try a commercially a vailable outdoor FM antenna instead. Notes: • Outdoor FM antennas work best outside, b ut usable results can sometimes be obta i ned when installed in an attic or loft.
25 Connecting the A V receiver —Continued • Before making an y A V conne ctions, read the manuals supplied with your other A V components. • Don’ t connect the power cord until you’ ve completed and double-checked all A V connections.
26 Connecting the A V receiver —Contin ued By connecting both the audio a nd video outputs of your D VD player and ot her A V components to the A V receiver, you can switch the audio and video signals simultaneously simply by changing the input source on the A V recei ver.
27 Connecting the A V receiver —Continued About HDMI Designed to meet the in crease d demands of digital TV , HDMI (High Definiti on Multimedia Interfa ce) is a new digi tal interface standard for connecting TVs, projectors, D VD players, set-top box es, and othe r video components.
28 Connecting the A V receiver —Contin ued Making HDMI Connections ■ Video Signals Digital video signals receiv ed by th e HDMI IN jacks are normally output by the HDMI OUT for display on your TV . ■ A udio Signals Digital audio signals receiv ed by the HDMI IN jacks are output by the speakers and headphones connected to the A V receiv er.
29 Connecting the A V receiver —Continued • W ith connection , you can listen to and re cord audio from your TV or listen in Zone 2. • T o enjoy Dolby Digital and DTS, use c onnection or . (T o record or listen in Zone 2 as well, use and , or and .
30 Connecting the A V receiver —Contin ued • W ith connection , you can listen to and record audio from a D VD or listen in Zone 2. • T o enjoy Dolby Digital and DTS, use co nnection or . (T o record or listen in Zone 2 as well, use and , or and .
31 Connecting the A V receiver —Continued W ith this hookup, you can use your VCR’ s tuner to li sten to your fa v orite TV programs via the A V receiv er, useful if your TV has no audio outputs. • W ith connection , you can listen to the VCR or D VR ev en in Zone 2.
32 Connecting the A V receiver —Contin ued Notes: • The A V receiv er must be turned on for recording. Recording is not possible while it’ s on Standby .
33 Connecting the A V receiver —Continued W ith this hookup, you can use your satellite or cable recei ver to listen to your fa v orite TV programs via the A V receiv er, which is useful if your TV has no audio outputs. • W ith connection , you can listen to and record audio from the video source or listen in Zone 2.
34 Connecting the A V receiver —Contin ued Note: When it is connected at th e same time as A UX INPUT A U DI O L/R terminal, the input of POR T ABLE is give n priority to and outputted.
35 Connecting the A V receiver —Continued ■ CD Player or T urntab le (M M) with Built-in Phono Preamp • W ith connection , you can listen to and record audio from the CD player or listen in Zone 2. • T o connect the CD player digitally , us e connection or .
36 Connecting the A V receiver —Contin ued • W ith connection , you ca n play and record or listen in Zone 2. • T o connect the recorder dig itally for playback, use conne ctions and , or and .
37 Connecting the A V receiver —Continued ■ If Y our iPod or iPhone Suppor ts Vide o: Connect your RI Dock’ s audio output jacks to the A V receiver’ s CBL/SA T IN or VCR/D VR IN L/R jacks, and connect its vide o output jack to th e A V receiv er’ s CBL/SA T IN or VCR/D VR IN V jacks.
38 Connecting the A V receiver —Contin ued Notes: • Do not connect components other than the Uni versal Port Option Dock with the UNIVERSAL POR T jack. • While your iPod or iPhone is seated in the Dock, its battery will be charged wh en the A V recei ver is set to On or Standby .
39 Connecting the A V receiver —Continued Wi t h u (Remote Interacti ve), you can use the follo wing special functions: ■ Auto P o wer On/Standby When you start playback on a component connected via u , if the A V re ceiv er is on Standby , it will automatical ly turn on and select that component as the input source.
40 T urning On the A V receiver ON/ST ANDBY RECEIVER ON/ST ANDBY ST ANDBY indicator T urning On and Standby On the A V receiver, press the [ON/ST ANDBY] button. On the remote controller , press th e [RECEIVER] button, follo wed by the [ON/ST ANDBY] button.
41 Fir st Time Setup This section explains the settings that you need to make before using the A V receiv er for the very f irst time. If you connect a video component to an HDMI IN, you must assign that input to an input selector . For example, if you connect your D VD play er to HDMI IN1, you must assign HDMI IN1 to the D VD/BD input selector .
42 First Time Setup —Contin ued If you connect a video component to a COMPONENT VIDEO IN, you must assign that input to an input selector . F or example, if you connect your D VD player to COMPONENT VIDEO IN 2, you must assign COMPONENT VIDEO IN 2 to the D VD/BD input selector .
43 First Time Setup —Continued If you connect a component to a digital audio input, you must assign that input to an input selector . For example, if you connect your CD player to OPTICAL IN 1, you must assign OPTICAL IN 1 to the CD input select or .
44 First Time Setup —Contin ued If the impedance of any speaker is 4 ohms or more b ut less than 6, set the Speaker Impedance to 4 ohms. North American models do not support speakers with an impedance of less than 6 ohms. T o use bi-amping, you must change the Speak er T ype setting.
45 First Time Setup —Continued If you connect an u -ca pable Onkyo RI Dock to the TV/T APE IN, CBL/SA T IN or VCR/D VR IN jacks, for u to work properly , you mu st change this setting.
46 First Time Setup —Contin ued W ith the supplied calibrated microphone, Audyssey 2EQ automatic ally determines the num ber of speakers connected, their size for purposes of bass management, optimum cros sove r frequencies to the subwoofer (if present), and distances from the primary listening position.
47 First Time Setup —Continued Using Audysse y 2EQ™ Notes: • Before starting Audyssey 2EQ™ Room Correction and Speaker Setup, arrange the room and connect the speakers as you would fo r enjoying movies. Changes to the room after auto setup requires you run the auto setup again, as room EQ characteristics may hav e changed.
48 First Time Setup —Contin ued Notes: • When the room co rrection and speaker setup is complete, the Equalizer Settings (page 70) will be se t to “Audyssey” and the “Dynamic EQ” (page 72) will be set to “On”.
49 Basic Operations Basic A V receiver Operation 1 Use the A V r eceiver’ s inpu t selector buttons to select an input source. T o select an input so urce with the remote contr oller , press its [RECEIVER] bu tton, and then use its INPUT SELECT OR buttons.
50 Basic Oper ations —Continued This section explains functions that can be used with an y input source. Y ou can adjust the bass and treble for the front speakers, except when the Direc t, Pure Audio listening mode is selected.
51 Basic Operations —Continued Y ou can adjust the brightness of the display . Y ou can temporarily mute the output of the A V recei ver. T o unmute the A V receiv er, press the remot e controller’ s [MUTING] b utton again, or adjust the volume. The outp ut is unmuted and the MUTING indicator goes off.
52 Basic Oper ations —Continued The Music Optimizer func tion enhances the sound quality of compressed music files. Use it with music files that use “lossy” compression, such as MP3. Note: The Music Optimizer function only works with PCM digital audio input signals with a sa mpling rate below 48 kHz and analog audio input signals.
53 Listening to the Radio For AM/FM tuning to work properly , you must specify the AM/FM frequency step used in your area. Note that when this setting is cha nged, all radi o presets are deleted. Note: This procedure can also be performed on the A V receiv er by using its [SETUP] b u tton, arro w buttons, and [ENTER] button.
54 Listening to the Radio —Continued W ith the b uilt-in tuner , you can enjoy AM and FM radio stations and store your f av orite stations as presets for easy selection. Listening to the Radio T uning into AM/FM Radio Stations ■ Auto T uning Mode When tuned into a station, the TUNED indicator appears.
55 Listening to the Radio —Continued ■ T uning into Stations b y Frequency Y ou can tune into AM and FM stations directly by entering the appropriate frequenc y . Displaying AM /FM Radio Inf ormation 1 Press the [TUNER] button repeatedly to select “AM” or “FM”, f ollowed by the [D .
56 Listening to the Radio —Continued Y ou can store a combination of up to 40 of your f av orite AM and FM radio stations. Deleting Pres ets Selecting Presets Presetting AM/FM Stations 1 T une into the AM or FM station y ou want to store as a preset.
57 UP-A1 series Doc k f or iP od/iPhone W ith the UP-A1 series Dock, you can easily play the music, photo, or movie stored on your Apple iPod or iPhone through the A V receiv er and enjoy great sound. Y ou can use the A V receiv er’ s remote controller to operate your iPod or iPhone.
58 UP-A1 series Dock for iP od/iPhone —Continued Operating Notes: • Before selecting a differen t input source, stop iPod or iPhone playback to pre v ent the A V re ceiv er from selecting the iPod or iPhone input source by mistake.
59 UP-A1 series Doc k fo r iP od/iPhone —Continued a Arrow [ q ]/[ w ] and ENTER b uttons Used to navig ate me nus and sele ct item s. b Previous [ 7 ] button Restarts the current song. Pr ess it twice to select the pre vious song. c Rewind [ 5 ] b utton Press and hold to rewind.
60 Recor ding This section explains ho w to record the input source and how to r ecord audio and vi deo from separate sources. Notes: • The surround sound and DSP listening modes cannot be recorded. • Copy-protected D VDs cannot be recorded. • Sources connected to a digital input cannot be recorded.
61 Using the Listening Modes For a description of each lis tening mode, see “ About the Listening Modes” on page 66. Selecting on th e A V receiver ■ [PURE A UDIO] b utton (Asian mod els) This button selects the Pu re Audio listening mode.
62 Using the Listening Modes —Continued Mono/Multiplex Sour ces ✔ : A vailable Listening Modes Notes: *1 Pure Audio l istening mod e is not available for No rth America n models. *2 Which Front h igh speak ers or Surrou nd back speak ers output s the sound is sw itched b y the “SpLayo ut” setting on page 74.
63 Using the Listening Modes —Continued Stereo Sour ce ✔ : A vail able Li stening Modes Notes: *1 Pure Audio listening mo de is not available for North Americ an models. *2 Which Front high spea kers or Surrou nd back sp eakers output s the sou nd is swit ched by the “SpLa yout” sett ing on page 74.
64 Using the Listening Modes —Continued 5.1 channe l Sour ces ✔ : A vailable Listening Modes Notes: *1 Pure Audio l istening mod e is not available for No rth America n models. *2 Which Front h igh speak ers or Surrou nd back speak ers output s the sound is sw itched b y the “SpLayo ut” setting on page 74.
65 Using the Listening Modes —Continued 7.1 chan nel Sour ces ✔ : A vail able Li stening Modes DTS-ES Discret e/Matrix Sour ces Notes: *1 Pure Audio listening mo de is not available for North Americ an models. *2 Which Front high spea kers or Surrou nd back sp eakers output s the sou nd is swit ched by the “SpLa yout” sett ing on page 74.
66 Using the Listening Modes —Continued The A V receiv er’ s listening modes can transform your listening room into a movie th eater or concert hall, with high fidelity and stunning surround sound.
67 Using the Listening Modes —Continued DTS-ES Matrix This mode is for use with DTS-ES Matrix soundtracks, which use a matrix-encoded back-channel for 6.1/7.1- channel playback. Use it with D VDs that bear the DTS- ES logo, especial ly those with a DTS-ES Matrix soundtrack.
68 Adv anced Setup Note: This procedure can also be perform ed on the A V recei ver by using its [SETUP] b utton, arro w buttons, and [ENTER] button. This section explains ho w to check the speaker se.
69 Adv anced Setup —Continued LPFofLFE 80 Hz, 90 Hz, 100 Hz (default), 120 Hz (Low-P ass Filter for the LFE Channel) This setting i s not set autom atically b y the Au dys sey 2EQ™ Room Correction an d Speaker Setup function (see page 46).
70 Adv anced Setup —Continued 2-4. Level Cal (Speaker Le vels Calibration) These settings are se t automatically b y the Audysse y 2EQ™ Room Correction a nd Speaker Setup function (see page 46). Y ou can set the volume le v el of each speak er so that all sp eak ers can be heard equally at the listeni ng position.
71 Adv anced Setup —Continued W ith the Audio Adjust functions and settings, you can adjust the sound and listening modes as you like. A udio Adjust 3. Audio Adjust 3-1. Mux/Mono (Multiplex/Mono) Input (Mux) M ain : The main channel is output ( default).
72 Adv anced Setup —Continued 3-3. DTS Neo:6 Music Cen ter Im age 0 to 5 (default: 2) The DTS Neo:6 Music listening mode creates 6-channe l surround sound from 2-channel stereo sources. W ith this setting, you can specify by how much the front left and right channel output is attenua ted in order to create the center channel .
73 Adv anced Setup —Continued Y ou can change various audio settings b y pressing the [A UDIO] b utton. Note: When the “AudioTV Out” setting is set to “On” (page 78), the [A UDIO] b utton is disabled. Using the A udio Settings RECEIVER A UDIO qwer 1 Press the [RECEIVER] button f ollow ed by the [A UDIO] button.
74 Adv anced Setup —Continued CinemaFIL TER W ith the CinemaFIL TER, you can soften ov erly bright movie soundtracks, which are typically mixed for reproduction in a movie theater .
75 Adv anced Setup —Continued Y ou can assign a default list ening mode to each input source that will b e sele cted automatically when you select each input source. For e xample, you can set the default listening mode to be used with Dolby Digita l input signals.
76 Adv anced Setup —Continued This section explai ns items on the “S ource Setup” menu. Items can be set individuall y for each input selector . IntelliV olum e W ith IntelliV olume, you can set the input level for each input selector indi vidually .
77 Adv anced Setup —Continued This section explains t he items on the “ Miscellaneous” menu. Note: This procedure can also be performed on the A V recei ver by using its [SETUP] b utton, arro w buttons, and [ENTER] button. V olume Setup ■ MaxV olume W ith this settin g, you can limit the maximum v olume.
78 Adv anced Setup —Continued This section explains item s on the “Hardware Setup” menu. Note: This procedure can also be performed on the A V recei ver by using its [SETUP] b u tton, arro w buttons, and [ENTER] button. Remote ID ■ Remote ID When sev eral Onkyo components are used in the same room, their remote ID co des may ov erlap.
79 Adv anced Setup —Continued ■ LipSync The A V recei ver can be set to automatically co rrect any delay between the video and th e audio, based on the data from the connected monitor . Notes: • This function works only if your HDMI-compatible TV supports HDMI Lip Sync.
80 Zone 2 In addition to your main listen ing room, you can also enjoy playback in the other room, or as we call Zone 2. And, you can select a different source for each room. Connecting Y our Zone 2 Speaker s Directl y to the A V receiver This setup allows 5.
81 Zone 2 —Continued If you’ v e connected your Zone 2 speakers to the A V receiv er, as e xplained in “Connecting Y our Zone 2 Speakers Directly to the A V receiv er” on page 80, you must set the “PwrdZ2” (Po wered Zone 2) setting to “Act” (Acti v ated).
82 Zone 2 —Continued This section explains ho w to turn Zone 2 on and of f, how to select an input source for Zone 2, and how to adjust the vo lume for Zone 2. Contro lling Zone 2 fr om the A V receiver Notes: • Only analog input sources are output by Zone 2.
83 Zone 2 —Continued Adjusting the V olume of Zones Muting Zones Note: Zones can also be unmuted by adjusting the v olume. On the remote contr oller , press the [ZONE 2] button, and then use the V OL [ q ]/[ w ] bu tton.
84 Contr olling Other Components Y ou can control your D VD player , CD player, and other components with the A V rece i ver’ s remote controller . T o control another component , you must f irst enter that component’ s r emote control code to a REMO TE MODE button.
85 Contr olling Other Components —Continued Onkyo components that are connected via u are controlled by pointing the remote controller at the A V receiv er, not the component. This allo ws you to control components that are out of vie w , in a rack, for example.
86 Controlling Other Components —Contin ued By pressing the [TV] button that’ s been programmed with the remote control code for your TV (TV/D VD combination or TV/VCR combination), you can control your TV with the follow ing buttons. For details on entering a remote control code for a different componen t, see page 84.
87 Contr olling Other Components —Continued By pressing the REMO TE MODE button that’ s been programmed with the remote control code for your D VD player (Blu-ray , HD D VD, or TV/D VD combination), you can control your player with the follo wing b uttons.
88 Controlling Other Components —Contin ued u CLR button Cancels functions and cl ears entered numbers. Notes: • If you enter the remote control code for a HD D VD or Blu-ray player that has A, B, C, and D or colored buttons, the [SEARCH], [REPEA T], [RANDOM], and [PLA Y MODE] buttons will w ork as colored or A, B, C, D buttons.
89 Contr olling Other Components —Continued By pressing the REMO TE MODE bu tton that’ s been programmed with the remote control code for your satellite re cei ver , cable recei ver , or D VD re corder (DBS/PVR combination or ca ble/PVR combination), you can control your player with the follo wing b uttons.
90 Controlling Other Components —Contin ued By pressing the REMO TE MODE b utton that’ s been programmed with the remote contr ol code for your CD player , you can control your player with the follo wing buttons. The [CD] b utton is preprogrammed with the remote control code for controlling an Onkyo CD player .
91 Contr olling Other Components —Continued By pressing the REMO TE MODE button that’ s been programmed with the remote control code for your Dock, you can control your iPod in the Dock with the following b uttons. For some RI docks, th e “ON/ST ANDBY” button may not work with a remote control cod e 82990 (without u ).
92 Controlling Other Components —Contin ued By pressing the REMO TE MODE button that’ s been programmed with the remote contr ol code for your cassette recorder , you can cont rol your cassette recorder with the following b uttons.
93 T roub leshooting If you hav e any trouble using the A V receiv er, look for a solution in this section. If you can’ t resolve the issue yourself, contact your Onkyo dealer . Can’t turn on the A V receiver • Make sure that the po wer cord is plugged into the w all outlet properly .
94 T roub leshooting —Continued The front high speaker s or surround bac k speakers produce no sound • Depending on the current liste ning mode, no sound may be produced by the front high speakers or surround back speakers. T ry another listening mode (page 61).
95 T roub leshooting —Continued • If the message “Resolution Error” appears on the A V recei ver’ s display , this indicates that your TV does not support the current video resolution and you need to select another resolution on your D VD player .
96 T roub leshooting —Continued Can’t record • On your recorder , make sure the co rrect input is selected. • T o prevent signal loops and damage to the A V receiv er, input signals are not fed through to outputs with the sa me name (e.g., TV/T APE IN t o TV/T APE OUT or VCR/D VR IN to VCR/D VR OUT).
97 Specifications Amplifier Sect ion Video Section T uner Section General ■ Video Inputs ■ Video Outputs ■ A udio Inputs ■ A udio Outputs ■ Control T ermi nal Specifications and features ar e subject to change without notice.
98 Specifications —Continued ■ P owered Subwoo fer (SKW -770) ■ Front Speaker (SKF-670) ■ Center Speaker (SKC-670) ■ Surround /Surround Bac k Speaker (SKR-670/SKB-670) Specifications and features ar e subject to change without notice.
99 Memo.
100 SN 29344937 (C) Copyright 2009 ONKY O CORPORA TION Japan. All rights reserved. http://www.onkyo.com/ HOMEPAGE Sales & Product Planning Div . : 2-1, Nisshin-cho , Ne yaga wa-shi, OSAKA 572-8540, J AP AN T el: 072-831-8023 F ax: 072-831-8163 ONKY O U.
An important point after buying a device Onkyo 29344937 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Onkyo 29344937 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Onkyo 29344937 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Onkyo 29344937 you will learn all the available features of the product, as well as information on its operation. The information that you get Onkyo 29344937 will certainly help you make a decision on the purchase.
If you already are a holder of Onkyo 29344937, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Onkyo 29344937.
However, one of the most important roles played by the user manual is to help in solving problems with Onkyo 29344937. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Onkyo 29344937 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
