Instruction/ maintenance manual of the product N150 On Networks
Go to page of 12
Easy , Reliable & Secure Installation Guide N150 WiFi Router (N150R).
Trademarks Brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice.
3 Router Description Front Panel . The front panel has five status LEDs. Power/Test LED . If solid green, the router is ready. If blinking green, the router is performing the power-on diagnostic test. If off, the router is not connected to a power source.
4 Back Panel . The back panel has these features. Ethernet ports . Connect a computer or other wired device to your router using these ports. Internet port .
5 Connect your router 1. Prepare your modem . Unplug your modem. If it has a battery backup, remove the battery. 2. Connect your modem . Plug in your modem.
6 3. Power on the router . Connect the power adapter to the router and plug the power adapter into an outlet 4. Connect a computer . Connect a computer using a wired Ethernet connection or connect wirelessly.
7 You can use an Ethernet cable (not included) or connect wirelessly. • Use the Ethernet cable to connect your computer to an Ethernet port on your router. If you are using a fixed IP address, be sure the LAN port is set to DHCP before connecting. (The default IP address is 192.
8 On Networks recommends that you do not change the preset WiFi network name (SSID) and WiFi network password (Network Key). If you do change the settings, the information on the bottom of the product does not apply.
9 If necessary to retrieve or update your password: 1. Type http://www.mywifirouter. com in a Web browser, and log in using the default user name ( admin ) and password ( admin ).
10 2. Look for the preset On Networks WiFi network name (SSID), and select it.The preset WiFi network name (SSID) is located on the product label on the bottom of the router. Note: If you changed the name of your network during the setup process, look for that network name.
Technical Support Thank you for selecting On Networks products. After installing your device, locate the serial number on the label of your product, and use it to register your product at http://www.on-networks.com/register . Registration is required before you can use the telephone support service.
May 2012.
An important point after buying a device On Networks N150 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought On Networks N150 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data On Networks N150 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, On Networks N150 you will learn all the available features of the product, as well as information on its operation. The information that you get On Networks N150 will certainly help you make a decision on the purchase.
If you already are a holder of On Networks N150, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime On Networks N150.
However, one of the most important roles played by the user manual is to help in solving problems with On Networks N150. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device On Networks N150 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
