Instruction/ maintenance manual of the product F7 Omron
Go to page of 12
365 G7/F7/L7/E7 inverter PLC 3G3RV-P10ST @ -E G7/F7/L7/E7 inverter PLC The OMRON PLC technology embedd ed in the OMRON Yaskawa inver ter family • OMRON PLC programmability in the OMRON Yaskawa inverters. • Flexibility and intelligence in the OMRON Yaskawa inverter family.
366 3G3RV-P10ST @ -E PLC inverter Specifications by prod uct General specifications Type designation Specifications Item 3G3RV-P10ST8-E 3G3RV-P10ST8-DRT-E PLC core CPM2C-S CPM2C-S Inputs 6 24 VDC inpu.
G7/F7/L7/E7 inverter PLC 367 Link bits (LR ar ea) 256 bits: LR 00 00 to LR 1515 (words LR 00 to LR 15) Timers/counters 256 timers/counters (TIM/CNT 000 to TI M/CNT) 1-ms timers: TMHH(--) 10-ms timers:.
368 3G3RV-P10ST @ -E Note: 1. The DM area, HR area, AR area, a nd counter values are back ed up . If the backup battery or capacitor is discharged, the contents of these areas will be lost and the data values will rev e r t to the defaults.
G7/F7/L7/E7 inverter PLC 369 The minimum pulse widths for inputs IN00000 (A-phase input) and IN00001 (B-ph ase input) are as follows: The minimum pulse width for input IN00002 (Z-p hase input) is as f.
370 3G3RV-P10ST @ -E CPU unit component descrip tions 1. DIP switch • RS-232C and peripheral por t set tings • Operating mode at star tup Pin 2 determines the operating mode at startup only if there isn't a programming device connected to the peripheral port.
G7/F7/L7/E7 inverter PLC 371 6. Communicati ons port Connects the PLC to a programming device (inclu ding programming consoles), host computer, or standard externa l device. Use a proper connecting cable (CPM2C-CN111, CS1W-CN114, C S1W-CN118, or CS1W-CN226).
372 3G3RV-P10ST @ -E G7 + PLC Varispeed G7 is the OMRON Yaskawa soluti on using 3 level PWM control technology that provides lower surge voltage, low leakage current, low bearing current, low acoustic noise and better EMC.
G7/F7/L7/E7 inverter PLC 373 F7 + PLC The F7 drive is a flux vector control inverter. It is int ended to handle ev ery conventional drive application f ound in a typica l industr ial manufa cturing plant from simple variable torque pumping to sophisticated networ ked material handling.
374 3G3RV-P10ST @ -E L7 + PLC The L7 is the ultimate drive for lift applications up to 3m/s. Hi gh starting torque, silent operation, lift-specific operator i nterf ace and operation with both AC and PM motors are standard f eatures of the L7 inv erter.
G7/F7/L7/E7 inverter PLC 375 Ordering information G7/F7/L7/E7 inverter PLC A Varispeed Note: For detailed inf ormation please refer to V ar ispeed G7/F7/L7/E7 ser ies section.
376 3G3RV-P10ST @ -E C Compobus/S slaves Note: For detailed inf ormation about Compobus/S slav es, please ref er to catalogue No. Y201-EN2-02 AS . Product Appearance Specifications Model Digital I/O t.
An important point after buying a device Omron F7 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Omron F7 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Omron F7 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Omron F7 you will learn all the available features of the product, as well as information on its operation. The information that you get Omron F7 will certainly help you make a decision on the purchase.
If you already are a holder of Omron F7, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Omron F7.
However, one of the most important roles played by the user manual is to help in solving problems with Omron F7. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Omron F7 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
