Instruction/ maintenance manual of the product 4389 Omnitron Systems Technology
Go to page of 4
Omnitron Systems T echnology , Inc. 140 T echnology Drive #500 Irvine, CA 92618 (949) 250-6510; Fax: (949) 250-6514 FlexPoint TM Powered Chassis 48VDC Power-Redundant 14-Module Chassis User ’ s Manual 8 Omnitron Systems T echnology , Inc. Hot Attachment of Power Supplies: 1.
2 Omnitron Systems T echnology , Inc. It is very strongly recommended that a replacement power supply unit be installed as soon as possible in order to prevent overheating of the chassis unit. THE POWER SUPPLIES ARE HOT-SW APP ABLE AND CAN BE REPLACED WITHOUT SHUTTING THE NETWORK DOWN.
Omnitron Systems T echnology , Inc.3 FlexPoint TM Powered Chassis User ’ s Manual GENERAL DESCRIPTION The FlexPoint TM Powered Chassis is a chassis capable of holding up to 14 FlexPoint TM media converter modules. It is equipped with two power supplies in a power-redundant configuration.
4 Omnitron Systems T echnology , Inc. CONTROLS AND INDICA T ORS LEDs Display: The Powered Chassis features two LEDs on the left front of the chassis, these LEDs display the status of the two power supplies.
An important point after buying a device Omnitron Systems Technology 4389 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Omnitron Systems Technology 4389 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Omnitron Systems Technology 4389 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Omnitron Systems Technology 4389 you will learn all the available features of the product, as well as information on its operation. The information that you get Omnitron Systems Technology 4389 will certainly help you make a decision on the purchase.
If you already are a holder of Omnitron Systems Technology 4389, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Omnitron Systems Technology 4389.
However, one of the most important roles played by the user manual is to help in solving problems with Omnitron Systems Technology 4389. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Omnitron Systems Technology 4389 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
