Instruction/ maintenance manual of the product G362 Omnimount
Go to page of 2
OmniMount Systems, In c. 8201 South 48th Street • Phoenix, AZ 85044-5355 www.omnimount.com Thank you for purchasing an OmniMount product. Stellar 362 T wo Shelf Video T able Assembly Instructions IMPORTANT: Consult your dealer if you have any questions regard- ing the proper assembly of this product.
Step 1 Install hex screw into pads on bottom of back post. (Fig. 1a) Install cable port covers into ba ck post. (Fig. 1b) Fig. 1a Fig. 1b Step 2 Lay ma in frame face do wn on fl oor. Match holes on support legs to holes on main frame support brackets.
An important point after buying a device Omnimount G362 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Omnimount G362 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Omnimount G362 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Omnimount G362 you will learn all the available features of the product, as well as information on its operation. The information that you get Omnimount G362 will certainly help you make a decision on the purchase.
If you already are a holder of Omnimount G362, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Omnimount G362.
However, one of the most important roles played by the user manual is to help in solving problems with Omnimount G362. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Omnimount G362 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
