Instruction/ maintenance manual of the product OMG-USB-DIO48 Omega Vehicle Security
Go to page of 22
www .omega.com e-mail: info@omega.com U ser ’ s Guide OMG-USB-DIO48 48 Channel Digital I/O Inter face Board Shop online at.
Servicing Nor th America: USA: One Omega Drive, P.O. Box 4047 ISO 9001 Certified Stamford CT 06907-0047 TEL: (203) 359-1660 FAX: (203) 359-7700 e-mail: info@omega.com Canada: 976 Bergar Laval (Quebec) H7L 5A1, Canada TEL: (514) 856-6928 FAX: (514) 856-6886 e-mail: info@omega.
Content INTRODUCTION .......................................................................................................... 1 O VERVIEW ...............................................................................................................
APPENDIX C - SILK - SC REEN ................................................................................. 15 APPENDIX D - COMPLIA NCE NOTICES ............................................................. 16 F EDERAL C OMMUNICATIONS C OMMISSION S TATEMENT .
Introduction and Installation OMG - USB - DIO48 Page 1 Introduction Overview The OMG - USB - DIO48 provides six eight - bit ports that may be individually configured as inputs or outputs. What’s Included The OMG - USB - DIO48 is ship ped with the following items.
Technical OMG - USB - DIO48 Page 2 Technical Description The OMG - USB - DIO48 provides 48 channels of digital I/O configurable as inputs or outputs. Applications include PC based control and automati.
Technical OMG - USB - DIO48 Page 3 Electrical Characteristics Figure 1, below provides the electrical characteristics of each Input/Output. Each port is buffered with a 74ABT245 octal bi - directional transceiver. Each input is capable of sinking up to 64 mA, while each output can source up to 32 mA.
Technical OMG - USB - DIO48 Page 4 Pull Ups Ten pin bussed resistor packs are installed to provide pull - ups to the input ports. These are installed on all ports. The pull - up resistor packs are rated at 10K ohms. Figure 2 below provides the bussed resistor and corresponding port.
Technical OMG - USB - DIO48 Page 5 Banks and Ports The OMG - USB - DIO48 has two 50 pin headers. Each 50 pin header is a bank of three ports, comprising a total of six eight bit ports. Each port is eight bits wide and may be configured as an input or output po rt.
Technical OMG - USB - DIO48 Page 6 50 pin ribbon cable pin out Each of the two 50 pin ribbon cable headers has the following pin out as shown in Figure 4.
Programming OMG - USB - DIO48 Page 7 Programming Application Programmers Interface (API) The SeaIO driver, API, and utilities have been included to provide control over the hardware in Windows environments. The following section is designed to help the customer understand the API connection to the actual I/O for the OMG - USB - DIO48.
Programming OMG - USB - DIO48 Page 8 Port Configuration: Each eight - bit port can be configured as inputs or outputs . The API provides a set adapter state call to access the control words. N ote: The control panel also allows you to configure the device.
Programming OMG - USB - DIO48 Page 9 Relative Addressing vs. Absolute Addressing The SeaIO API makes a distinction between “absolute” and “ relative” addressing modes. In absolute addressing mode, the Port argument to the API function acts as a simple byte offset from the base I/O address of the device.
Programming OMG - USB - DIO48 Page 10 Figure 7 below gives t he absolute address for each bit on this device. Bank 1 – P2 Bank 2 – P3 Addres s Port - Bit Addres s Port - Bit 0 A1 - 0 24 A2 - 0 1 A.
Programming OMG - USB - DIO48 Page 11 Figures 8 and 9 are provided for the user to record their particular relative addressing setup, provided its constant. Print this page and fill in the tables st arting in the top left corner of each and work from top to bottom, left to right.
Specifications OMG - USB - DIO48 Page 12 Figure 9 - Bit Relative Address (Print and fill in for your configuration) Specifications Environmental Specifications Specification Operating Storage Temperature Range 0º to 50º C (32º to 122º F) - 20º to 70º C (- 4º to 158º F) Humidity Range 10 to 90% R.
Appendix A - Troubleshooting OMG - USB - DIO48 Page 13 Appendix A - Troubleshooting Following these simple steps can eliminate most common problems. Install software first . After installing the software then proceed to adding the hardware. This places the required installation files in the correct location s.
Appendix B - How T o Get Assistance OMG - USB - DIO48 Page 14 Appendix B - How To Get Assistance Please refer to Troubleshooting Guide prior to callin g Technical Support. 1. Begin by reading through the Trouble Shooting Guide in Appendix A. If assistance is still needed please see below.
Appendix C - Silk - Screen OMG - USB - DIO48 Page 15 Appendix C - Silk - Screen.
Appendix D - Compliance Notices OMG - USB - DIO48 Page 16 Appendix D - Compliance Notices Federal Communications Commission Stateme nt FCC - This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to Part 15 of the FCC Rules.
W ARRANTY / DISCLAIMER OME GA ENGINEERING, INC. war rants this unit to be free of defects in materials and workmanship for a period of 1 3 months from date of purc hase. OM E G A ’ s W ARRAN TY adds an additional one (1) month grace period to the normal one (1) year pr oduct warranty to cover handling and shipping time.
M 38 9 7 /0303 Where Do I Find Ever ything I Need for Pr ocess Measurement and Control? OM EGA…Of Course! Shop online at www .omega.com TEMPERA TURE Thermocouple, RTD & Thermistor Probes.
An important point after buying a device Omega Vehicle Security OMG-USB-DIO48 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Omega Vehicle Security OMG-USB-DIO48 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Omega Vehicle Security OMG-USB-DIO48 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Omega Vehicle Security OMG-USB-DIO48 you will learn all the available features of the product, as well as information on its operation. The information that you get Omega Vehicle Security OMG-USB-DIO48 will certainly help you make a decision on the purchase.
If you already are a holder of Omega Vehicle Security OMG-USB-DIO48, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Omega Vehicle Security OMG-USB-DIO48.
However, one of the most important roles played by the user manual is to help in solving problems with Omega Vehicle Security OMG-USB-DIO48. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Omega Vehicle Security OMG-USB-DIO48 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
