Instruction/ maintenance manual of the product M0902 Omega Engineering
Go to page of 4
MODEL J DIAL TEMP™ INSTRUCTION SHEET M0102/0902 ® OMEGA 0 250 200 150 100 50 INTRODUCTION The Model J Dialtemp TM is a non electronic thermometer that features a 360 degree swivel neck with a 90 degree tilt range of it’s large easy-to-read 5 inch dial face.
NOTE: Observe that the head and stem must be in the full upright position in order to rotate the head. Tighten the bracket bolts securely. 2. Adjust the tilt angle of the head by loosening the two hinge screws and tilting the head to the desired position.
RECALIBRATION: External 1 ⁄ 4 " nut reset screw OVERRANGE PROTECTION: 50% up to 500°F MATERIALS: CONSTRUCTION: Stainless steel welded construction (rust and corrosion-proof, leakproof, hermetically sealed) PRESSURE RATING: Rated to 1,000 PSI. Use of thermowell is recommended for higher pressures or for very heavy-duty applications.
M0102/0902 It is the policy of OMEGA to comply with all worldwide safety and EMC/EMI regulations that apply. OMEGA is constantly pursuing certification of its products to the European New Approach Directives. OMEGA will add the CE mark to every appropriate device upon certification.
An important point after buying a device Omega Engineering M0902 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Omega Engineering M0902 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Omega Engineering M0902 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Omega Engineering M0902 you will learn all the available features of the product, as well as information on its operation. The information that you get Omega Engineering M0902 will certainly help you make a decision on the purchase.
If you already are a holder of Omega Engineering M0902, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Omega Engineering M0902.
However, one of the most important roles played by the user manual is to help in solving problems with Omega Engineering M0902. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Omega Engineering M0902 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
