Instruction/ maintenance manual of the product IN9 32X-MAX Nvidia
Go to page of 96
Hardware Setup BIOS Setup Driver & Utility Multilingual QIG Appendix IN9 32X IN9 32X -MAX Motherboard Socket 775 User’s Manual About this Manual: This user’s manual contains a ll the information you may need for setti ng up this motherboard.
ii IN9 32X/IN9 32X-MAX IN9 32X/IN9 32X-MAX User’s Manual English + Multilingual QIG P/N: 4310-0000-76 Rev. 4.00, March 2007 Copyri g ht and Warranty Notice The information in this document is sub j .
Hardware Setup BIOS Setup Driver & Utility Multilingual QIG Appendix IN9 32X/IN9 32X-MAX iii Contents 1. Hardware Setup ............................................................... 1-1 1.1 Specif ications .......................................
iv IN9 32X/IN9 32X -MAX 2.6 Power Manage ment Setup .......................................................... 2-21 2.7 PnP/PCI Co nfigurations .............................................................. 2-23 2.8 Load Fail-Safe Defa ults ..........
Hardware Setup BIOS Setup Driver & Utility Multilingual QIG Appendix IN9 32X/IN9 32X-MAX v 4.19.2 快速安裝略說 .................................................................. 4-20 4.20 简体中文 ........................................
vi IN9 32X/IN9 32X -MAX.
Hardware Setup IN9 32X/IN9 32X-MAX 1-1 1. Hardware Setup 1.1 Specifications CPU • LGA775 socket for Inte l Core 2 Quad / EE / Duo & Pentium Dual Core / EE / D / 4 processor • Supports FSB 1333.
1-2 IN9 32X/IN9 32X -MAX 1.2 Motherboard Layout ※ The motherboard and its component la youts illustrated in this manual were mainly based on model “IN9 32X-M AX”, unless specifically stated. For model “IN9 32X”, still you may refer to “IN9 32X-MAX”.
Hardware Setup IN9 32X/IN9 32X-MAX 1-3 1.3 Choosing a Computer Chassis • Choose a chassi s big enough to in stall thi s motherboard. • As some features fo r this motherboard are impl emented by ca.
1-4 IN9 32X/IN9 32X -MAX 1.5 Checking Jumper Settings • For a 2-pin jumper, pl ug the jumper cap on both pins will make it CLOSE (SHORT). Remove the jumper cap, or plug it on either pin (reserved for future use) will leave it at OPEN position.
Hardware Setup IN9 32X/IN9 32X-MAX 1-5 CMOS Backup Battery: An onboard battery saves the CMOS memory to keep the BIOS information stays on even after disconnected your system with power source. Ne vertheless, this backup battery exhausts after some five years.
1-6 IN9 32X/IN9 32X -MAX 1.6 Connecting Chassis Components 1.6.1 ATX Power Connectors These connectors provide the connection from an ATX power supply. As the pl ugs from the power supply fit i n only one orie ntation, find t he correct one and push firmly down into these connectors.
Hardware Setup IN9 32X/IN9 32X-MAX 1-7 1.6.2 Front Panel Switches & Indicators Headers This header is used for connecting switches and LE D indicators on the chassis front panel. Watch the power LED pin pos ition and orient ation. The mark “+” align to the pin in the figure below stands for po sitive pol arity for the LED connection.
1-8 IN9 32X/IN9 32X -MAX 1.6.3 FAN Power Connectors These connectors each provide power to the cooling fans installed in your system. • CPUFAN1: CPU Fan Power Connector • SYSFAN1: System Fan Power Connector • AUXFAN1~4: Auxiliary Fan Power Connector ※ These fan connectors are not jumpers.
Hardware Setup IN9 32X/IN9 32X-MAX 1-9 1.6.4 Additional Cooling Fan for NB Heatsink To attach an additional chipset cooling fan for model “IN9 32X-MAX” : Inside the motherboard pac kage you can find a pair of retention clips.
1-10 IN9 32X/IN9 32X -MAX 1.7 Installing Hardware ※ DO NOT scratch the motherboard when installing hardware. An accidental scratch of a tiny surface-mount co mponent may seriously damage the motherboard. ※ In order to protect the contact pins, pl ease pay attention to these notices: 1.
Hardware Setup IN9 32X/IN9 32X-MAX 1-11 5. Use your left hand to hold the load plate, and use your right thumb to peel the cap off. The cap plays an important role in protecting contact pins. In order to prevent bent pin, PUT ON the cap after operation or testing.
1-12 IN9 32X/IN9 32X -MAX 1.7.2 DDR2 Memory Slots • To reach the optimum performance in dual-c hannel configurations, install identical DDR2 DIMM pairs for each channel. • Install DIMMs with the same CAS latency. To reach the op timum compatibility, obtain memory modules from the same vendor.
Hardware Setup IN9 32X/IN9 32X-MAX 1-13 1.7.3 PCI Express X16 Add-on Slots (Install Graphics Card) These slots support the connections of graphics cards that comp ly with PCI Express specifications.
1-14 IN9 32X/IN9 32X -MAX Two PCIE graphics cards ins tallation (SLI Mode): To install two SLI-ready graphics card s under SLI Mode, you will need to: • Prepare two identical N VIDIA certif ied, SLI- ready PCI Express X16 graphics cards (the same model from the same manufacturer).
Hardware Setup IN9 32X/IN9 32X-MAX 1-15 1.8 Connecting Peripheral Devices 1.8.1 Floppy and IDE Disk Drive Connectors The FDC1 connector connects up to two floppy drives with a 3 4-wire, 2-connector floppy cable.
1-16 IN9 32X/IN9 32X -MAX 1.8.2 Serial ATA Connectors Each SATA connector serves as one single channe l to connect one SATA device b y SATA cable. To connect SATA device: 1. Attach either en d of the s ignal cable to the SATA connector on motherboard.
Hardware Setup IN9 32X/IN9 32X-MAX 1-17 1.8.3 Additional USB 2.0 Port Headers Each header supports 2x addi tional US B 2.0 ports by c onnecting brack et or cable to the rear I/O panel or the front-mounted USB ports of your chassis.
1-18 IN9 32X/IN9 32X -MAX 1.8.5 Internal Audio Connectors This connector connects to the audio output of internal CD-ROM drive or add-on card . 1.8.6 Front Panel Audio Connection Header This header pr.
Hardware Setup IN9 32X/IN9 32X-MAX 1-19 Driver Configuration for AC’97 audio connection: The audio driver is originally configured to sup port HD Audio. For AC’97 audio connection, you may: 1. Right-click the “Realtek HD Audio Manager” icon in system tray.
1-20 IN9 32X/IN9 32X -MAX 1.8.7 S/PDIF Output Connection Header This header provides the S/PDIF output connection to your add-on HDMI VGA card. Pin Pin Assignment 1 VCC (5V) 2 x 3 S/PDIF Out 4 Ground 1.8.8 PCI and PCI Express X1 Slot Install PCI Express X1 cards into sl ots “PCIE1” and/or “PCIE2” .
Hardware Setup IN9 32X/IN9 32X-MAX 1-21 1.8.9 Guru Panel Connection Header This header is reserved for connecting abit ’s exclusive Guru Panel. For more information, please refer to the included Guru Panel Installation Guide.
1-22 IN9 32X/IN9 32X -MAX 1.9 Onboard Indicators and Buttons 1.9.1 POST Code Displayer This is an LED device to display the “ POST ” Code, the acronym for P ower O n S elf T est. The computer will execute the POST action whenever you power on the com puter.
Hardware Setup IN9 32X/IN9 32X-MAX 1-23 1.9.2 Power Source Indicators • 5VSB/3VSB: This LED lights up when the pow er su pply is connected with power source. • VCC: This LED lights up when the system p ower is on. • SLI_PWR1: This LED lights up when the “ ATX4P 1” connector is NOT connected with power.
1-24 IN9 32X/IN9 32X -MAX 1.10 Connecting Rear Panel I/O Devices The rear I/O part of this mo therboard provides the f ollowing I/O ports : • Mouse: Connects to PS/2 mouse. • Keyboard: Connects to PS/2 keyboard. • EZ-CCMOS1: This switch enables clearing the CMOS memory w ithout uncovering the system chassis.
BIOS Setup IN9 32X/IN9 32X-MAX 2-1 2. BIOS Setup This motherboard provides a p rogrammable EE PROM so that you can update the BIOS utility. The BIOS (Basic Input/Output System) is a pr ogram that deals with the basic level of communication bet ween processor and peripherals.
2-2 IN9 32X/IN9 32X -MAX 2.1 μ Guru ™ Utility There are two setup menus in this μ Guru utility. You may switch between these two by clicking the left or right arrow key on keyboard: 2.1.1 OC Guru μ Guru Utility v1.00C OC Guru Intel(R) Core(TM)2 Quad CPU @ 2.
BIOS Setup IN9 32X/IN9 32X-MAX 2-3 ※ There will be no guaranty for the setting s beyond specification. Any damage of any component on this motherboard or pe ripherals resulting therein is not our responsibility. - FSB <QDR> This item selects the external clock frequency.
2-4 IN9 32X/IN9 32X -MAX Voltages Control This option allows you to switch between the de fault and user-defined voltages. Leave this setting at default unless the current voltage setti ng cannot be d etected or is not correct. The option “ User Define ” enables you to select the following voltages manually.
BIOS Setup IN9 32X/IN9 32X-MAX 2-5 Power Cycle Statistics Click <Enter> key to enter its submenu: μ Guru Utility v1.00C OC Guru Power Cycle Statistics PC Up Time 0 Hours Item Help ►► PC Up .
2-6 IN9 32X/IN9 32X -MAX [All ON]: All the LED lights on without any flashing effect. [MODE 1 ~ MODE 7]: All the LED lights on with the flashing effect by one of these modes. Temperature Monitoring Click <Enter> key to enter its submenu: μ Guru Utility v1.
BIOS Setup IN9 32X/IN9 32X-MAX 2-7 Voltage Monitoring Click <Enter> key to enter its submenu: μ Guru Utility v1.00C ABIT EQ Voltage Monitoring Reading Shutdown Enable Beep Enable High Limit Low Limit (*)CPU Core Voltage 1.31 V (*) (*) 1.50 V 0.
2-8 IN9 32X/IN9 32X -MAX Fan Speed Monitoring Click <Enter> key to enter its submenu: μ Guru Utility v1.00C ABIT EQ Fan Speed Monitoring Reading Shutdown Enable Beep Enable Low Limit (*)CPU.
BIOS Setup IN9 32X/IN9 32X-MAX 2-9 FanEQ Control μ Guru Utility v1.00C ABIT EQ FanEQ Control ► 1st FanEQ Group Press Enter Item Help ►► ► 2nd FanEQ Group Press Enter :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit 1st FanEQ Group Click <Enter> key to enter its submenu (1st FanEQ Group): μ Guru Utility v1.
2-10 IN9 32X/IN9 32X -MAX - Control Temperature High/Low These items set the high and low temperature limit that you want to do the fan speed control. - Fan PWM Duty Cycle High/Low These items set the high and low limit of PWM d uty cycle that you want to provide the fan with.
BIOS Setup IN9 32X/IN9 32X-MAX 2-11 2.2 Standard CMOS Features Phoenix – AwardBIOS CMOS Setup Utility Standard CMOS Features Date (mm:dd:yy) Fri, Mar 9 2007 Item Help Time (hh:mm:ss) 12 : 34 : 56 .
2-12 IN9 32X/IN9 32X -MAX IDE HDD Auto-Detection This item allows you to detect t he parameters of IDE drives by pressing <Enter> key. The parameters will be shown on the screen autom atically. IDE Channel 1 Master/Slave, SATA Channel 1~6 When set to [Auto], the BIOS will automatically check what kind of IDE or SATA hard drive you are using.
BIOS Setup IN9 32X/IN9 32X-MAX 2-13 [All, But Keyboard]: The system-b oot will stop for all errors except a keyboard error. [All, But Diskette]: The system-boot will stop for all errors except a diskette error. [All, But Disk/Key]: The system-boot will stop for all errors excep t a diskette or keyboard error.
2-14 IN9 32X/IN9 32X -MAX CPU Feature Click <Enter> key to enter its submenu: Phoenix – AwardBIOS CMOS Setup Utility CPU Feature EIST Function Auto Item Help Thermal Control Enabled Limit .
BIOS Setup IN9 32X/IN9 32X-MAX 2-15 Back to Advanced BIOS Features Setup Menu Hard Disk Boot Priority This item selects the hard disks booting priority. By p ressing <Enter> key, you can enter its submenu where the hard disks det ected can be selec ted for the booti ng sequence to boot up system.
2-16 IN9 32X/IN9 32X -MAX 2.4 Advanced Chipset Features Phoenix – AwardBIOS CMOS Setup Utility Advanced Chipset Features ► Memory Timing Setting Press Enter Item Help SLI Broadcast Aperture Disabl.
BIOS Setup IN9 32X/IN9 32X-MAX 2-17 - tRRD - tRC - tWR - tWTR - tREF - tRFC Back to Advanced Chipset Features Setup Menu SLI Broadcast Aperture Options: [Disabled], [Auto]. LDT Frequency Options: [1X], [2X] , [3X], [4X], [5X]. System BIOS Cacheable This item enables or disables caching the system BIOS for faster execution.
2-18 IN9 32X/IN9 32X -MAX 2.5 Integrated Peripherals Phoenix – AwardBIOS CMOS Setup Utility Integrated Peripherals ► OnChip IDE/RAID Function Press Enter Item Help Init Display First PCI Slot OnChip USB V1.
BIOS Setup IN9 32X/IN9 32X-MAX 2-19 IDE Function Setup Click <Enter> key to enter its submenu: Phoenix – AwardBIOS CMOS Setup Utility IDE Function Setup IDE 1 Controller Enabled Item Help .
2-20 IN9 32X/IN9 32X -MAX RAID Function This item allows you to enable or disable the RAI D function. - SATA1 RAID ~ SATA6 RAID This item allows you to enable or disable t he RAID function for eac h of the SATA 1~6 port individually.
BIOS Setup IN9 32X/IN9 32X-MAX 2-21 2.6 Power Management Setup Phoenix – AwardBIOS CMOS Setup Utility Power Management Setup ACPI Suspend Type S3(Suspend To RAM) Item Help - USB Resume from S3 Disab.
2-22 IN9 32X/IN9 32X -MAX - Day of Month Alarm [0]: This option power-on the system everyd ay according to the time set in the “Time (hh:mm:ss) Alarm” item. [1-31]: This option selects a date you would like the system to power-on. The system will power-on on the date set, and the time set in the “T ime (hh:mm:ss) Alarm” item.
BIOS Setup IN9 32X/IN9 32X-MAX 2-23 HPET Support Options: [Disabled], [Enabled]. 2.7 PnP/PCI Configurations Phoenix – AwardBIOS CMOS Setup Utility PnP/PCI Configurations Resources Controlled By Auto.
2-24 IN9 32X/IN9 32X -MAX PCI/VGA Palette Snoop This item determines whether the MPEG I SA/VESA VGA cards can work w ith PCI/VGA or not. [Enabled]: MPEG ISA/VESA VGA cards work with PCI/VGA. [Disabled]: MPEG ISA/VESA VGA cards do not work with PCI/VGA.
Driver & Utility IN9 32X/IN9 32X-MAX 3-1 3. Driver & Utility The “Driver-&-Utility CD” that came packed with this m otherboard contains drivers, utilities and software applications required for its ba sic and advanced features. ※ The screen shots in this chapter are snapped from model “IN9 32X-MAX”.
3-2 IN9 32X/IN9 32X -MAX 3.2 nVidia nForce Chipset Driver To install this program: 1. Click on the [ Drivers ] tab in the installation menu screen. 2. Click the [ nVidia nForce Chipset Driver ] item. The installation screen appears. 3. Follow the prompts on the screen to complete installation.
Driver & Utility IN9 32X/IN9 32X-MAX 3-3 5. Click the [ Audio I/O ] tab. 6. Click the pull down menu to select the channel configuration. 7. Click [OK] button to apply the Audio I/O settings and exit. 3.4 Silicon Image 3132 SATA Driver This driver provides functionality for the external SATA R AID Controller.
3-4 IN9 32X/IN9 32X -MAX 3.5 AirPace Wi-Fi Wireless Driver This driver provides functionality for the op tional AirPace Wi-Fi wireless network adapter. ※ This driver installation a ppears only when the AirPace Wi-Fi wireless network adapter is connected.
Driver & Utility IN9 32X/IN9 32X-MAX 3-5 3.7 abit μ Guru The abit μ Guru combined with the optional Guru Panel allows you to access and select system performance of your sy stem while playin g games, listening mus ic, browsing Internet or office applications in full screen with no need to stop or close the running application.
3-6 IN9 32X/IN9 32X -MAX 3.8 Build NVRaid Floppy Disk Under Windows Environment This procedure is necessary if you want to install operating system to a RAID configuration connected among “ SATA1~SATA6 ” connectors: 1. Prepare a 3.5” flo ppy disk drive and c onnect it t o “ FDC1 ” connector on this motherboard.
Driver & Utility IN9 32X/IN9 32X-MAX 3-7 3.9 Build SIL3132 SATA Floppy Disk Under Windows Environment This procedure is necessary if you want to install operating system to a SATA configuration connected between “ eSATA1 ” connectors: 1. Prepare a 3.
3-8 IN9 32X/IN9 32X -MAX 3.10 Build SIL3132 RAID Floppy Disk Under Windows Environment This procedure is necessary if you want to install operating system to a RAID configuration connected between “ eSATA1 ” connectors: 1. Prepare a 3.5” flo ppy disk drive and c onnect it t o “ FDC1 ” connector on this motherboard.
Driver & Utility IN9 32X/IN9 32X-MAX 3-9 3.11 Build A Driver Disk Under DOS Environment The “Driver Disk Maker” program bundled in the Driver-&-Utility CD is a utility to build the driver program needed for SATA controlle r into a flo ppy disk under DOS environment .
3-10 IN9 32X/IN9 32X -MAX.
Multilingual QIG IN9 32X/IN9 32X-MAX 4-1 4. Multilingual Quick Installation Guide 4.1 Français//Guide d'Installation Rapide Ce “Guide d’Installation rapi de ” contient seulement l information de base dont vous pouvez avoir besoin lors de l’installation de votre c arte mère abit.
4-2 IN9 32X/IN9 32X -MAX 4.2 Deutsch//Kurze Installationsanleitung Diese “Kurze Installationsan leitung” enthält nur die grundlegenden Har dwareinformat ionen, die Sie zur Installation Ihres abit-Motherboards be nötigen. Details finden Sie im ausführ lichen Handbuch.
Multilingual QIG IN9 32X/IN9 32X-MAX 4-3 4.3 Italiano//Guida all’installazione rapida Questa “Guida all’ins tallazione rapida ” contiene solame nte le informazioni di b ase sull’hardware necessarie all’installazione de lla scheda ma dre abit.
4-4 IN9 32X/IN9 32X -MAX 4.4 Español//Guía rápida de instalación Esta “Guía de insta lación rápida” contie ne solamente la información b ásica sobre el hard ware que puede n ecesitar durante la instalación de la pl aca base abit. Para conocer el funcionamien to avanzado, es n ecesario consultar l a versión completa.
Multilingual QIG IN9 32X/IN9 32X-MAX 4-5 4.5 Português//Guia de instalação rápida Este “Guia de instal ação rápida” cont ém apenas informação essencial sob re o hardware e necessári a à instalação da sua p laca princip al abit. Para mais informações, terá de co nsultar a versão in tegral deste guia.
4-6 IN9 32X/IN9 32X -MAX 4.6 Русский // Краткое руководство по установке В “ Кратком руководстве по установке ” содержитс.
Multilingual QIG IN9 32X/IN9 32X-MAX 4-7 4.7 Eesti//Kiirpaigaldusjuhend Käesolev “Kiirpaig aldusjuhen d” sisaldab ai nult abit-emaplaadi p aigaldamiseks vajal ikku riistvaraalast põhiteavet. Edasijõudnud kasuta miseks tuleb teil ikkagi pöörduda täisversiooni poole.
4-8 IN9 32X/IN9 32X -MAX 4.8 Latviski// Ā tr ā s instal ē šanas instrukcija Š ī “ Ā tr ā s instal ē šanas instrukcija” i etver tikai pamata nor ā des iek ā rtai, kas nepieciešamas, instal ē jot abit m ā tesplati. Piln ī g ā kai darb ī bai nepieciešams ieg ū t instrukcijas pap lašin ā to variantu.
Multilingual QIG IN9 32X/IN9 32X-MAX 4-9 4.9 Lietuvi ų //Trumpas instaliavimo vadovas Šiame “Trumpame instali avimo vadove” pateikta tik esmin ė informacija apie technin ę į rang ą , kurios jums ga li prireikti instaliuojant pagrindin ę plok št ę abit.
4-10 IN9 32X/IN9 32X -MAX 4.10 Polski//Instrukcja szybkiej instalacji Ta “Instrukcja szybki ej instalacji” zaw iera tylko podstawowe informac je dotycz ą ce sprz ę tu, wymaga ne podczas instala cji p ł yty g ł ównej abit. Przy zaawansowanych operacjach, ni ezb ę dne b ę dzie skorzysta nie z kompletnej wer sji instrukcji.
Multilingual QIG IN9 32X/IN9 32X-MAX 4-11 4.11 Magyar//Gyorstelepítési útmutató Ez a “Gyorstelepítési útmu tató” csak azt az alapvet ő hardver információ t tartalmazza, amely az abit al aplap telepítéséhez szükséges. Az el ő rehaladott üzemel tetéshez, továbbra is a teljes útmu tatót kell használni a.
4-12 IN9 32X/IN9 32X -MAX 4.12 Türkçe//H ı zl ı Kurulum K ı lavuzu Bu “H ı zl ı Kurulum K ı lavuzu”, abit anakart ı n ı z ı takman ı zda gerekebilecek sadece temel donan ı m bilgisini içermek tedir. İ leri i ş lemler için daha geni ş olan ta m versiyonuna ba ş vurman ı z gerekecektir.
Multilingual QIG IN9 32X/IN9 32X-MAX 4-13 4.13 ﺔﻴﺑﺮﻌﻟا ﺔﻐﻠﻟا // ﻊﻳﺮﺴﻟا ﺐﻴآﺮﺘﻟا ﻞﻴﻟد.
4-14 IN9 32X/IN9 32X -MAX 4.14 ﯽﺳرﺎﻓ // ﻊﻳﺮﺳ ﺐﺼﻧ ﯼﺎﻤﻨهار.
Multilingual QIG IN9 32X/IN9 32X-MAX 4-15 4.15 日本語 // クイックインストールガイド この「クイックインストールガイド」には、abit マ ザーボードを取り付け.
4-16 IN9 32X/IN9 32X -MAX 4.16 한국어 / / 빠른 설치 가이드 본 “ 빠른 설치 가이드 ” 는 빅빔 abit 메인보드 설치에 필요한 중요한 하드웨어 정보만을 포함하고 있습니다 . 보다 상세한 정보 및 과정은 사용자 설명서를 참고하시기 바랍니다 .
Multilingual QIG IN9 32X/IN9 32X-MAX 4-17 4.17 Bahasa Malaysia//Panduan Pemasangan Ringkas “Panduan Pemasangan Ringkas” ini hanya mengandungi maklumat perkakasan asas ya ng anda mungk in perlu semasa memasang papan induk abit anda. Untuk pengendalian lanjuta n, anda perlu rujuk k e versi lengkapnya.
4-18 IN9 32X/IN9 32X -MAX 4.18 ไทย // คู่มื อการต ิ ดต ั้ งอย ่ างย ่อ ข้ อม ู ลทางเทคน ิ คของอ ุ ปก.
Multilingual QIG IN9 32X/IN9 32X-MAX 4-19 4.19 繁體中文 4.19.1 規格 處理器 • 支援 Intel Core 2 Quad / EE / Duo 以及 Pentium Dual Core / EE / D / 4 處理器的 LGA775 插座 • 支援 .
4-20 IN9 32X/IN9 32X -MAX 4.19.2 快速安裝略說 本「快速安裝略說」僅包含安裝 abit 主機板時所需的 基本硬體資訊。詳細的操作方式，仍請參閱其完整的 手冊.
Multilingual QIG IN9 32X/IN9 32X-MAX 4-21 4.20 简体中文 4.20.1 规格 处理器 • 支持 Intel Core 2 Quad / EE / Duo 以及 Pentium Dual Core / EE / D / 4 处理器的 LGA775 插座 • 支持 .
4-22 IN9 32X/IN9 32X -MAX 4.20.2 快速安装略说 本“快速安装略说”仅包含基本的硬件信息，供您在 安装 abit 主板时进行参考。如需了解高级操作，仍请 参阅.
Appendix IN9 32X/IN9 32X-MAX 5-1 5. Appendix 5.1 POST Code Definitions 5.1.1 AWARD POST Code Definitions POST (hex) Description CF Test CMOS R/W functionality C0 Early chipset initialization: -Disable.
5-2 IN9 32X/IN9 32X -MAX 26 1. If Early_In it_Onboa rd_Generator is not defined Onboar d clock generator initialization. Disable respective clock resour ce to empty PCI & DIMM slots. 2. Init onboard PWM 3. Init onboard H/W monitor devices 27 Initialize INT 09 buffer 29 1.
Appendix IN9 32X/IN9 32X-MAX 5-3 76 (Optional Feature) Enter AWDFLASH.EXE if: -AWDFLASH is found in floppy drive -ALT+F2 is pressed 77 Detect serial ports & parallel ports.
5-4 IN9 32X/IN9 32X -MAX 5.1.2 AC2005 POST Code Definitions POST (hex) Description Power On Sequence 8.1. Start power on sequence 8.2. Enable ATX power supply 8.3. ATX power supply ready 8.4. DDR voltage ready 8.5. Setup PWM for CPU core voltage 8.6. Assert PWM for CPU core voltage 8.
Appendix IN9 32X/IN9 32X-MAX 5-5 5.2 Troubleshooting (How to Get Technical Support?) 5.2.1 Q & A Q: Do I need to clear the CMOS before I use a new motherboard to assemble my new computer system? A: Yes , we highly recommend that you clear the CMOS bef ore installi ng a new motherboard.
5-6 IN9 32X/IN9 32X -MAX Q: How to get a quick response for my request on technical support? A: P lease carry out a simple troubl eshooting befo re sending “ Technical Support Form ”: System boot-.
Appendix IN9 32X/IN9 32X-MAX 5-7 • Memory configuration: Type in the memory configuration in BIOS setting. Example: Memory Timing: 2.5-3-3- 7 @533MHz • Graphics information: Note Graphic s card’s brand, model and driv er version • Graphics card: Type in t he brand and model name of your graphi cs card.
5-8 IN9 32X/IN9 32X -MAX 5.2.2 Technical Support Form Region: E-mail: First name: Last Name: Subject: Motherboard: BIOS Version: CPU: Memory brand: Memory size: Memory configuration: Graphics card: Gr.
Appendix IN9 32X/IN9 32X-MAX 5-9 5.2.3 Contact Information Taiwan Head Office Universal ABIT Co., Ltd. No. 323, Yang Guang St., Neihu, Taipei, 114, Taiwan Tel: 886-2-8751-3380 Fax: 886-2-8751-3381 Sales: sales@abit.
P/N: 4310-0000-76 Rev. 4.00 http://www.abit.com.tw.
An important point after buying a device Nvidia IN9 32X-MAX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nvidia IN9 32X-MAX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nvidia IN9 32X-MAX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nvidia IN9 32X-MAX you will learn all the available features of the product, as well as information on its operation. The information that you get Nvidia IN9 32X-MAX will certainly help you make a decision on the purchase.
If you already are a holder of Nvidia IN9 32X-MAX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nvidia IN9 32X-MAX.
However, one of the most important roles played by the user manual is to help in solving problems with Nvidia IN9 32X-MAX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nvidia IN9 32X-MAX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
