Instruction/ maintenance manual of the product NM100 series NuTone
Go to page of 8
MODELS NM 100 • NC 300 P age 1 CA UTION W ARNING T O REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJUR Y T O PERSONS, OBSER VE THE FOLLOWING: 1. Read all instructions carefully before installing or using the NM100/NC300 System.
MODELS NM 100 • NC 300 P age 2 DOOR ST A TION The Door Station is an exterior intercom speaker and door chime pushbutton installed at home entrances. The NM100 system supports up to 3 door stations. The door station allows for communications from within the house to visitors.
MODELS NM 100 • NC 300 P age 3 Note: For the rst two seconds, the tuner scans at slow speed to allow for ne tuning. After two seconds, the tuner scans at fast speed. Preset Radio Stations To preset radio stations: 1.
MODELS NM 100 • NC 300 P age 4 DISPLA Y BRIGHTNESS 1. Simultaneously press TUNE UP and POWER. The display cycles through brightness levels: low, medium, and high, then repeats the cycle. 2. Press the buttons repeatedly until you reach the brightness you prefer.
MODELS NM 100 • NC 300 P age 5 • The station hears the door chime and communicates with and listens to a Door Station. Off WhenastationissettoOFF: • You can communicate from an Indoor Remote Station but youcannotcommunicatefromanOutdoorRemoteStation.
MODELS NM 100 • NC 300 P age 6 • Talk TalktoallremotestationssettoIntercomorRadio/INT. • SpeakerVolume Use Speaker Volume knob to adjust the remote speaker volume.
MODELS NM 100 • NC 300 P age 7 DOOR ST A TION FUNCTIONS When the button on the Door Station is pressed, the chime is heardonallstationssettoIntercomorRadio/INT. • All system audio (music and intercom) is muted when the chime rings.
MODELS NM 100 • NC 300 P age 8 Two Y ear Limited W ar ranty WARR ANT Y OWNE R: Broan- Nu T one war rants to the or iginal consumer purchaser of its produc ts that such product s will be fre e from defects in materials o r workmanship for a period of two (2) years fro m th e date of original purchase.
An important point after buying a device NuTone NM100 series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NuTone NM100 series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NuTone NM100 series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NuTone NM100 series you will learn all the available features of the product, as well as information on its operation. The information that you get NuTone NM100 series will certainly help you make a decision on the purchase.
If you already are a holder of NuTone NM100 series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NuTone NM100 series.
However, one of the most important roles played by the user manual is to help in solving problems with NuTone NM100 series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NuTone NM100 series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
