Instruction/ maintenance manual of the product MPCD33 Numark
Go to page of 16
MPCD33 PROFESSIONAL DUAL CD PLAYER MANUAL ©2002 Industries http://www.numark.com.
MPCD33 SAFETY INSTRUCTIONS a) Read Instructions - All the safety and operating instruction s should be read before this product is conne cted and used. b) Retain Instr uctions - The safety and operating in structions should be kept for future reference .
MPCD33 ® MPCD33 PROFESSIONAL DUAL CD PLAYER CONGRATULATIONS... You have just purchased a CD player designed spec ifically for the professional DJ. This unit has been designed to provide CD mixing with the same ease and creativity that you have enjoyed with records.
MPCD33 TABLE OF CONTENTS Safety Instructions 2 Introduction and Registration 3 Set-up & Connections 5 Description of the Features Face Panel 6 Display 7 Rear Panel 8 MP3 File Playback (MUST READ) .
MPCD33 SETUP and CONNECTIONS Typical connection with a mixer is illustrated below. 1. Mount the units in your cons ole or rack with 19” EIA rails. 2. The transport shoul d be mounted not to exceed an angle of 15 degrees. 3. Your CD player can be affected by excess vibration so mount the units in a secure environment if possible.
MPCD33 FRONT PANEL FEATURES 1. Open/Close: Press to load or eject the disc. The tra y will not open if a di sc is in play. The tray door will automatically close i n 30 seconds if left open. This is to protect the tray from accidental damage while open.
MPCD33 Pitch Bend Function: allow s the user to temporarily change the speed of the music to align beats. When the beats of the music of the CD you wish to match is fast compared to the tempo of the other music, rotate the jog wheel counter clockwise (to the le ft).
MPCD33 REAR PANEL FEATURES 22. Control Cable Connector- Plug in the 8-pin cable included in here to conn ec t the remote control and main CD unit together 23. IEC Power Plug Co nnector - Plug your supp lied power cord in here. 24. Voltage Selector - Set this switch to the voltage for your location.
MPCD33 MP3 AUDIO PLAYBACK REQUIREMENTS While playing MP3 music, pleas e note the following points. It is assumed that the user of this unit under stands how to properly burn a CDR and add MP3 files to it. Many different variations MP3 audio ar e available from various sources and computer programs.
MPCD33 DESCRIPTION OF THE PLAY/PAUSE AND CUE OPERATIONS PLAY and CUE Pressing the “PLAY/PAUSE” button starts the disc. Pressi ng the “CUE” button will reset the di sc to the last place where the disc was started . This is called the cue po int.
MPCD33 TRACK SELECTION Track selecti on can be done 2 ways. • You can use the key pad by selecting the side, then the selectio n, then play • You can use the rotary selector on the individual play.
MPCD33 MATCHING THE BEATS PER MINUTE (BPM) Match the tempo by monitoring the mu sic of both PLAYER 1 and PLAYER 2 by ear and adjusting the pitch. When the tempo of the music of the selected CD player is slow compared to the tempo of the other player, move the slider to the “+” side and match the tempo.
MPCD33 EXAMPLE OF MIXING USING TWO CD PLAYERS While playing a disc on PLAYER 1 load a disc into PLAYER 2 and select your next track, match its pitch to the track playing on PLAYER1 and when you are ready use the crossfader on your mixer to fade from PLAYER 1 to PLAYER 2.
MPCD33 FADER START Fader Start is achievable by attaching your CD player to a si milarly equipped DJ mi xer and setting the rear panel selec tion swi tch to “mixer” mode. 1. Connect cables bet ween the CD player and your DJ mixer. 2. Press the button or switch on your mixer into fader start mode to activate the fader start capability.
MPCD33 TROUBLESHOOTING: Symptom Possible Cause Corrective Action The power fails to switch on when the POWER switch is set to on Poor power plug conne ction at the AC outlet or IEC Power cord loose fr.
® Professional Disc Jockey Products LIMITED PRODUCT WARRANTY 1. What is covered and for how long? NUMARK INDUSTRIES LCC ("NUMARK") warrants to the orig inal purchaser that NUMARK'S DJ .
An important point after buying a device Numark MPCD33 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Numark MPCD33 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Numark MPCD33 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Numark MPCD33 you will learn all the available features of the product, as well as information on its operation. The information that you get Numark MPCD33 will certainly help you make a decision on the purchase.
If you already are a holder of Numark MPCD33, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Numark MPCD33.
However, one of the most important roles played by the user manual is to help in solving problems with Numark MPCD33. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Numark MPCD33 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
