Instruction/ maintenance manual of the product WS32 Numark Industries
Go to page of 4
Users Manual ® PRODUCT WARRANTY 1. NUMARK INDUSTRIES LLC (“NUMARK” ) warrants to the original pur chaser that NUMARK'S produ cts are free from defects in material and workmanship under norma.
T able of Contents Thank you for choosing the Numark WS-32 single non-diversity wireless microphone. Before use, please read this manual carefully to fully understand the proper operation of this product and get the best result. This microphone features quartz controlled, fixed frequency VHF high band operation.
PART S DES CRIPTION Pa rts Description Front P anel Back Panel (4) V olume Control (5) AF Output (6) DC Input (7) Power Switch 5 2 (1) Power LED Indicator (2) Microphone Signal LED Indicator (3) Antenna (1) (3) (4) (6) (5) (7) (2) 2. Microphone (1) Power LED Indicator (2) Power Switch (3) Battery Cover (3) (2) (1) 1.
3 Fe atures 1. Frequency Range: VHF 170~250 MHZ. 2. Frequency Stability 0.005% quartz oscillation controlled. 3. Modulation(Max): 30KHZ. 4. Frequency Response:50Hz~18KHz 3dB. 5. Hum & Noise:96dB min. 6. Dynamic Range:100dB min. 7. Distortion:less than 1%.
An important point after buying a device Numark Industries WS32 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Numark Industries WS32 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Numark Industries WS32 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Numark Industries WS32 you will learn all the available features of the product, as well as information on its operation. The information that you get Numark Industries WS32 will certainly help you make a decision on the purchase.
If you already are a holder of Numark Industries WS32, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Numark Industries WS32.
However, one of the most important roles played by the user manual is to help in solving problems with Numark Industries WS32. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Numark Industries WS32 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
