Instruction/ maintenance manual of the product TT1910 Numark Industries
Go to page of 8
Professional Disc Jockey Products TT1910 Direct-Drive Turntable OWNER’S MANUAL NUMARK INDUSTRIES 11 Helmsman Road, North Kingstown, RI 02852 http://www.
TT1910 RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE ANY COVER. NO USER- SERVICEABLE PARTS INSIDE.
TT1910 CONGRATULATIONS! You have just purchased the Numark TT1910 Professional Direct Drive Turntable. This unit has been design to provide years of reliable operation in an easy to use design. Thank you for purchasing a Numark Product and enjoy the mix.
TT1910 TT1910 DIAGRAM... PARTS DESCRIPTION (1) 45-rpm Adaptor (2) Anti-static slip mat (3) Center Spindle (4) Stroboscope (5) Start/Stop Button (6) Speed Select Button (7) Strobe Dots (8) Target light.
TT1910 ASSEMBLY 1. Remove the main unit with the packing from the box and take off the packing material. DO NOT DISCARD ANY PACKING MATERIAL. The headshell, counterweight, and other parts are contained within the packing material. 2. Set the 45-rpm adaptor on the main unit.
TT1910 9. Slide counterweight onto the rear of the tonearm. Twist it lightly and it will screw onto the rear shaft of the tonearm. Tonearm Counterweight 10. Adjustment of horizontal zero (O) balance with stylus pressure and anti-skating : (1) Remove the stylus protector, do not touch the stylus tip during the adjustment.
TT1910 OPERATING INSTRUCTIONS 1. Push the power button to turn on the power, the speed indicator and the strobe-illuminator will light up. 2. Place a record on the turntable mat, when playing a 45rpm record with a large center hole, place the 45-rpm adaptor on the center spindle.
Professional Disc Jockey Products Warranty and Service Information Numark Industries, LLC and Numark International, Inc. (hereafter “Numark”) warrants each new product manufactured and/or supplied.
An important point after buying a device Numark Industries TT1910 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Numark Industries TT1910 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Numark Industries TT1910 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Numark Industries TT1910 you will learn all the available features of the product, as well as information on its operation. The information that you get Numark Industries TT1910 will certainly help you make a decision on the purchase.
If you already are a holder of Numark Industries TT1910, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Numark Industries TT1910.
However, one of the most important roles played by the user manual is to help in solving problems with Numark Industries TT1910. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Numark Industries TT1910 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
