Instruction/ maintenance manual of the product SM-3 Numark Industries
Go to page of 12
Professional Disc Jockey Products PRO SM-3 PROFESSIONAL DJ MIXER with Infinity Fader™ Owner’s Manual ©2000 Industries http://www.numark.com.
PRO SM-3 - The Leader in DJ Technology ©1999 Industries - 2 - http://www.numark.com Safety Information SAFETY INSTRUCTIONS a) Read Instructions - All the safety and operating instructions should be read before this product is connected and used. b) Retain Instructions - The safety and operating instructions should be kept for future reference.
PRO SM-3 - The Leader in DJ Technology ©1999 Industries - 3 - http://www.nu mark.com VERY IMPORTANT Please read this entire manual before connecting this unit to your system For optimum performance: • The crossfader is a user replaceable item and subject to wear.
PRO SM-3 - The Leader in DJ Technology ©1999 Industries - 4 - http://www.numark.com PRO SM-3 PROFESSIONAL DJ MIXER CONGRATULATIONS! You have purchased the PRO SM-3 Stereo Mixer by . The PRO SM-3 features the patented design Infinity™ fader, that utilizes a beam of light and variable blocker mechanism.
PRO SM-3 - The Leader in DJ Technology ©1999 Industries - 5 - http://www.numark.com TABLE OF CONTENTS Safety Measures 2 Important Information 3 Registration 3 Introduction 4 Description of the Featur.
PRO SM-3 - The Leader in DJ Technology ©1999 Industries - 6 - http://www.numark.com 1 2 3 4 5 6 7 8 10 11 12 14 15 16 9 20 19 21 22 23 24 25 13 17 18.
PRO SM-3 - The Leader in DJ Technology ©1999 Industries - 7 - http://www.numark.com MIXER FEATURES INPUTS 1. Input faders - control individual source levels in the mix. 2. Hamster Control – reverses direction of the input fader. 3. Slope Adjust – sets the rate of volume increase as the Input Fader is moved.
PRO SM-3 - The Leader in DJ Technology ©1999 Industries - 8 - http://www.numark.com REAR PANEL FEATURES 1 2 3 4 5 6 7 8 5 8 5 8 7 7 6 6 10 9 11 12 13 14 1. Power Switch – to turn unit on after you have turned on all input devices and before you turn on any devices attached to the output.
PRO SM-3 - The Leader in DJ Technology ©1999 Industries - 9 - http://www.numark.com QUICK SETUP DIAGRAM Study this setup diagram. Make sure all faders are at "zero" and all devices are off. First, connect all input sources and processors. Next, connect your microphone and monitor headphones.
PRO SM-3 - The Leader in DJ Technology ©1999 Industries - 10 - http://www.numark.com Infinity™ Fader The First truly Optical Fader The Infinity Fader™ is a Industries worldwide patented design and completely changes the way audio mixers work. The Infinity™ Fader is the world's first truly 100% optical fader.
PRO SM-3 - The Leader in DJ Technology ©1999 Industries - 11 - http://www.numark.com SPECIFICATIONS INPUTS: Line: 10k input impedance 175mV rms sensitivity (for 1.22V output) Mic: 10k input impedance unbalanced 3mV rms sensitivity (for 1.22V output) 85mV rms max input Phono: 47k in put impedance 1.
Professional Disc Jockey Products LIMITED PRODUCT WARRANTY What is covered and for how long? 1. NUMARK INDUSTRIES LCC ("NUMARK") warrants to the original purchaser that NUMARK'S DJ mixe.
An important point after buying a device Numark Industries SM-3 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Numark Industries SM-3 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Numark Industries SM-3 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Numark Industries SM-3 you will learn all the available features of the product, as well as information on its operation. The information that you get Numark Industries SM-3 will certainly help you make a decision on the purchase.
If you already are a holder of Numark Industries SM-3, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Numark Industries SM-3.
However, one of the most important roles played by the user manual is to help in solving problems with Numark Industries SM-3. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Numark Industries SM-3 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
