Instruction/ maintenance manual of the product PRO TT-1 Numark Industries
Go to page of 12
® Professional Disc Jockey Products PRO TT-1 PROFESSIONAL DIRECT DRIVE TURNTABLE OWNER’S MANUAL INDUSTRIES ©1999 11 Helmsman Avenue, North Kingstown, RI 02852 http://www.
PRO TT-1 Safety Information and Product Registration CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE ANY COVER. NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
PRO TT-1 PRO TT-1 Professional Turntable INDEX Safety Information Page 2 Product Registration System Precautions Page 4 Introduction Page 5 Features and Assembly Instructions Page 6 Operating Instruct.
PRO TT-1 IMPORTANT INFORMATION... Please read this entire manual before connecting the PRO TT-1 to your system. For optimum performance: • Always make sure that AC power is OFF while making any connections. • Do not force the platter to stop moving while the motor is engaged.
PRO TT-1 CONGRATULATIONS! You are now the owner a PRO TT-1 Professional Turntable, the ultimate tool for todays skilled turntablist. This unit has been designed by DJs for DJs. With it’s super high-torque platter and large back lit display the PRO TT-1 gives the professional absolute total control.
PRO TT-1 FEATURES,OPERATING, & ASSEMBLY INSTRUCTIONS... 1 2 3 4 5 6 7 8 9 10 17 16 15 14 13 12 11 To fully appreciate the features of the PRO TT-1 , please read this entire manual before you begin operation. The PRO TT-1 should be placed on a level sturdy surface.
PRO TT-1 8. 45 Adapter - Place on Center Spindle (7) for playing 7” records with large center holes. 9. Forward/Reverse Buttons - These determine the direction the platter will spin. 10. Lid Hinge Holder - Place the bottom tabs of your lid hinges in here after you finish assembly.
PRO TT-1 27. Anti-Skate Control - This applies inward force to the tonearm so it doesn’t skip outward across the record due to the centrifugal force of the record spinning. Cartridge manufacturers usually specify the proper setting of this. 28. Tone Arm Height Adjust - This allows the tone arm to be properly align with the platter surface.
PRO TT-1 REAR PANEL DIAGRAM... 41 42 43 44 45 46 47 40 40. Removable Lid - Protects the turntable from dirt and dust. 41. Hinge Assembly - Holds the lid and turntable together. Attach now by sliding the bottom tabs of the Hinge Assembly into the Hinge Holders (10).
PRO TT-1 GENERAL OPERATING INSTRUCTIONS... 1. Turn the power dial to turn on, the speed indicator and the strobe-illuminator will light up. 2. Turn on and raise the target light for illuminating the stylus tip by pushing the target light button.
PRO TT-1 SPECIFICATIONS... TURNTABLE SECTION Type 3-speed, full manual Driving method Direct drive Motor 12 Pole, 3 Phase, Brushless DC Motor Turntable platter Aluminum diecast 330mm dia. Turntable speed 33-l/3 , 45, and 78 rpm Pitch Variance ±10% Starting Torque more than 2.
® LIMITED PRODUCT WARRANTY 1. What is covered and for how long? NUMARK INDUSTRIES LCC ("NUMARK") warrants to the original purchaser that NUMARK'S DJ mixers and amplifiers are free from.
An important point after buying a device Numark Industries PRO TT-1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Numark Industries PRO TT-1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Numark Industries PRO TT-1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Numark Industries PRO TT-1 you will learn all the available features of the product, as well as information on its operation. The information that you get Numark Industries PRO TT-1 will certainly help you make a decision on the purchase.
If you already are a holder of Numark Industries PRO TT-1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Numark Industries PRO TT-1.
However, one of the most important roles played by the user manual is to help in solving problems with Numark Industries PRO TT-1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Numark Industries PRO TT-1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
