Instruction/ maintenance manual of the product CM-100 Numark Industries
Go to page of 12
Professional Disc Jockey Products CM-100 PROFESSIONAL DJ MIXER USER’S MANUAL ©1999 Industries http://www.numark.com.
CM100 - The Leader in DJ Technology ©1999 Industries - 2 - http://www.numark.com Safety Information SAFETY INSTRUCTIONS a) Read Instructions - All the safety and operating instructions should be read before this product is connected and used. b) Retain Instructions - The safety and operating instructions should be kept for future reference.
CM100 - The Leader in DJ Technology ©1999 Industries - 3 - http://www.numark.com VERY IMPORTANT Please read this entire manual before connecting this unit to your system For optimum performance: • The crossfader is a user replaceable item and subject to wear.
CM100 - The Leader in DJ Technology ©1999 Industries - 4 - http://www.numark.com CM100 PROFESSIONAL DJ MIXER CONGRATULATIONS! You have purchased the CM100 Stereo Mixer by . This mixer has been designed to provide dependable control over your input and output sources.
CM100 - The Leader in DJ Technology ©1999 Industries - 5 - http://www.numark.com TABLE OF CONTENTS Safety Measures 2 Important Information 3 Registration 3 Introduction 4 Quick Setup Diagram 7 Descri.
CM100 - The Leader in DJ Technology ©1999 Industries - 6 - http://www.numark.com.
CM100 - The Leader in DJ Technology ©1999 Industries - 7 - http://www.numark.com QUICK SETUP DIAGRAM Study this setup diagram. Make sure all faders are at "zero" and all devices are off. First, connect all stereo input sources. Next, connect your microphone(s) and monitor headphones.
CM100 - The Leader in DJ Technology ©1999 Industries - 8 - http://www.numark.com MIXER FEATURES 1 2 3 4 5 6 7 8 10 9 13 11 12 14 15 17 16 18 19 20 21 22 23 24 25 26 We have divided this section into various functional blocks: Inputs, Microphone, Crossfader, Equalizer, Outputs, and Headphone Cueing.
CM100 - The Leader in DJ Technology ©1999 Industries - 9 - http://www.numark.com EQUALIZER 12. 5-Band Stereo Graphic Equalizer (EQ) - compensates for differences in source material sound quality. In ultra-compact mobile systems this EQ can be used to tailor the sound to the acoustical requirements of the room.
CM100 - The Leader in DJ Technology ©1999 Industries - 10 - http://www.numark.com REAR PANEL FEATURES 27 28 29 30 31 33 36 32 35 34 38 37 39 40 27. Phono Inputs – for attaching your turntables. When these connectors are used, your signal is fed directly to the high-quality RIAA phono pre-amplifiers.
CM100 - The Leader in DJ Technology ©1999 Industries - 11 - http://www.numark.com SPECIFICATIONS INPUTS: Line: 10k Ω input impedance 85mV rms sensitivity (for 1.22V output) Mic: 10k Ω input impedance unbalanced 2 mV rms sensitivity (for 1.22V output) 60mV rms max input Phono:47k Ω input impedance 1.
Professional Disc Jockey Products LIMITED PRODUCT WARRANTY What is covered and for how long? 1. NUMARK INDUSTRIES LCC ("NUMARK") warrants to the original purchaser that NUMARK'S DJ mixe.
An important point after buying a device Numark Industries CM-100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Numark Industries CM-100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Numark Industries CM-100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Numark Industries CM-100 you will learn all the available features of the product, as well as information on its operation. The information that you get Numark Industries CM-100 will certainly help you make a decision on the purchase.
If you already are a holder of Numark Industries CM-100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Numark Industries CM-100.
However, one of the most important roles played by the user manual is to help in solving problems with Numark Industries CM-100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Numark Industries CM-100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
