Instruction/ maintenance manual of the product 6217D Northern Industrial Tools
Go to page of 20
INSTR UCTION MANU AL W ARNING: F or your personal saf ety , READ and UNDERST AND bef ore using. SA VE THESE INSTR UCTIONS FOR FUTURE REFERENCE. www .makitatools.
2 SPECIFICATIONS • Manuf acturer reser ves the right to change specifications without notice. • Specifications ma y differ from country to countr y . Model 6217D 6237D 6317D 6337D 6347D Capacities Steel 10 mm (3/8”) 13 mm (1/2”) Wood 25.4 mm (1”) 32 mm (1-1/4”) 25.
3 GENERAL SAFETY R ULES USA003-1 (FOR All BA TTER Y OPERA TED T OOLS ) W ARNING: Read and understand all instructions. F ailure to f ollow all instructions listed below , ma y result in electr ic shoc k, fire and/or serious personal injur y . SA VE THESE INSTR UCTIONS Wo r k A r e a 1.
4 T ool Use and Care 12. Use clamps or other practical wa y to secure and support the workpiece to a stable platf orm. Holding the work by hand or against your body is unstab le and may lead to loss of control. 13. Do not for ce tool. Use the correct tool for your application.
5 4. Be sure no one is below when using the tool in high locations. 5. Hold the tool firmly . 6. Keep hands awa y from rotating parts. 7. Do not leave the tool running. Operate the tool only when hand-held. 8. Do not touch the drill bit or the w orkpiece immediately after operation; they may be extremel y hot and could burn your skin.
6 5. Use of an attachment not recommended or sold by the battery charger manufac- turer may result in a risk of fire, electric shock, or injury to persons. 6. T o reduce risk of damage to electric plug and cord, pull b y plug rather than cord when disconnecting charger .
7 3. Do not allow an ything to cover or clog the charger vents. 4. Alwa ys cover the battery terminals with the battery cover when the battery car- tridge is not used. 5. Do not short the batter y cartridge: (1) Do not touch the terminals with any conductive material.
8 FUNCTIONAL DESCRIPTION CA UTION: • Always be sure that the tool is s witched off and the batter y cartr idge is remov ed bef ore adjusting or checking function on the tool. Installing or removing battery cartridge • Always s witch off the tool bef ore inser tion or removal of the batter y cartr idge.
9 NO TE: • The batter y charger is f or charging Makita batter y car tridge. Ne ver use it f or other pur poses or f or other manuf acturer ’ s batteries. • When you charge a ne w batter y car tridge or a batter y car tridge which has not been used for a long period of time, it ma y not accept a full charge.
10 Switch action CA UTION: • Bef ore inser ting the batter y car tridge into the tool, alwa ys check to see that the s witch trigger actuates properly and retur ns to the “ OFF ” position when released. T o star t the tool, simply pull the switch trigger .
11 • Do not use the speed change le ver while the tool is running. The tool may be damaged. Selecting action mode This tool has an action mode change le ver . F or dr illing, depress the lock b utton and then slide the action mode change le ver to the left ( symbol).
12 Installing or removing driver bit or drill bit Hold the ring and tur n the slee ve countercloc kwise to open the chuck ja ws. Place the bit in the chuck as f ar as it will go . Hold the ring fir mly and turn the sleev e clockwise to tighten the chuck.
13 • If the tool is operated continuously until the battery car tridge has discharged, allow the tool to rest f or 15 minutes bef ore proceeding with a fresh batter y . Drilling operation First, slide the action mode change le ver to the position of symbol.
14 • Alwa ys secure small workpieces in a vise or similar hold- down de vice. • If the tool is operated continuously until the battery car tridge has discharged, allow the tool to rest f or 15 minutes bef ore proceeding with a fresh batter y .
15 EN0001-1 Recyc ling the Battery The only wa y to dispose of a Makita batter y is to recycle it. The law prohibits an y other method of disposal. T o recycle the batter y: 1.
Memo 16.
17 First-Class Postage Required Post Office will not deliver without proper postage. Makita U .S.A., Inc. 14930 Nor tham Street La Mirada, CA 90638-5753 Fold Cut.
18 1. This product was pur chased from: Home Center Hardware/Lumber Store T ool Distributor Industrial Supply Construction Supply Other ( ) 3. Ho w did you learn about this product: Magazine F rom Dealer Newspaper Store Display Catalog Radio Exhibition F rom Friend Previous Usage Other ( ) 2.
19 F A CT OR Y SER VICE CENTERS 1-800-4-MAKIT A RET AIN THIS POR TION FOR Y OUR RECORDS ALABAMA 2365 Pelham P arkway Pelham, AL 35124 (205) 620-1791 ARIZONA 3707 E. Broadw ay Rd., Ste. 6 Phoenix, AZ 85040 (602) 437-2850 ARKANSAS Shackleford Shopping Center 240 South Shackleford Rd.
W ARNING Some dust created by po wer sanding, sawing, g r inding, drilling, and other construction activities contains chemicals known to the State of Calif or nia to cause cancer , bir th def ects or other reproductive harm.
An important point after buying a device Northern Industrial Tools 6217D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Northern Industrial Tools 6217D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Northern Industrial Tools 6217D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Northern Industrial Tools 6217D you will learn all the available features of the product, as well as information on its operation. The information that you get Northern Industrial Tools 6217D will certainly help you make a decision on the purchase.
If you already are a holder of Northern Industrial Tools 6217D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Northern Industrial Tools 6217D.
However, one of the most important roles played by the user manual is to help in solving problems with Northern Industrial Tools 6217D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Northern Industrial Tools 6217D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
