Instruction/ maintenance manual of the product Meridian 1 Option 11C Mini Nortel
Go to page of 334
Opt i on 11C Mini Plannin g a nd Ins tall ati on G ui de Merid ian 1 Op tion 1 1C Mini Plann i ng and In sta l latio n G uide Doc ument Num ber: 553-3021 -209 Doc ument Rel eas e: St andard 3.
.
Page 3 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 4 Revision his tory April 2000 Iss ue 3. 00, S tand ard. This i s a globa l docu m ent and i s up-is sued for X11 Re leas e 25 .0x. Sep tember 19 99 Iss ue 2. 00, S tand ard. Upda ted t o incl ude Opt ion 11 C Mi ni P hase I I cont e nt.
P a ge 4 o f 33 2 55 3-30 21-209 Stand ard 3.00 April 2000.
Page 5 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 12 Cont e nt s Ab ou t this g uide . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Who shoul d read this guid e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
P a ge 6 o f 33 2 Content s 55 3-30 21-209 Stand ard 3.00 April 2000 Mis ce ll ane ou s it em s fo r in s tal la ti o n . . . . . . . . . . . . . . . . . . . . . . . . 40 Di ffere nc e s bet ween Optio n 11C Mini a nd Op tio n 11C . . . . . . . . . . .
Content s Page 7 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Im po r ta nc e of R ing er Equ iv a le n ce Nu mb e r . . . . . . . . . . . . . . . . . . 83 Hea r in g a id co mp a ti bil it y . . . . . . . . . . . . . . . . . . . . . .
P a ge 8 o f 33 2 Content s 55 3-30 21-209 Stand ard 3.00 April 2000 Ch apter 10 — Conn ectin g the Chassis Exp ander to th e Main Cha ssis . . . . . . . . . . . . . . . 135 Chapt er 11 – In stallin g the s y stem g round . . . . . 139 C has si s p o we r ed b y t he s am e ser v i ce pan e l .
Content s Page 9 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Chapt er 15 — In stallin g and co nnect in g SDI and Eth er net po rt s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191 Mo de m s etu p re qu i rem e nts . .
Pag e 10 of 332 Content s 55 3-30 21-209 Stand ard 3.00 April 2000 Act iv a ti ng t erm i nal s o n a D S L . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 5 1 Ch apter 18 — Conn ectin g the trunks . . . . . . . . . . 253 C onn e ct ing t run k s wit h o ut a P F TU .
Content s Pa ge 11 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide ESD I s ett in g s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 92 Te le pho n e ton e s . . . . . . . . . . . . . . . . . . . . .
Pag e 12 of 332 Content s 55 3-30 21-209 Stand ard 3.00 April 2000 C reat i ng m od el t run k s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 9 Mod ifyi ng m odel trunks . . . . . . . . . . . . . . . . . . . . . . . . .
Pa ge 13 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 16 About this gu i de Who s hou ld read th is gu id e The Option 11C M i ni P l ann ing and Ins t all ation Guide i s for pers ons res ponsib le for pl ann ing a n d ins tall ing th e Opti on 11C Mini sys t em.
Pag e 14 of 332 About this gui de 55 3-30 21-209 Stand ard 3.00 April 2000 Termi no lo gy us ed in t his gui de The Option 11C M ini Plan ning and In s tall ation Guid e is a global do cument. This gui de conta ins s o me t erms which are not common i n the UK.
Abou t this guide Page 1 5 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Rela te d do cu m en ts Refe r to the follo w ing doc ument s for a ddit ional in form ation: • Option 11C an .
Pag e 16 of 332 About this gui de 55 3-30 21-209 Stand ard 3.00 April 2000 • M3900 Se rie s Mer idi an Digit al Tele phone De script io n, Ins tallat ion, a nd Adm in istratio n (553-3001- 216) • .
Pa ge 17 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 26 Chapter 1 — Introd uc ing t he Opt ion 11C Mini This cha pt er provi des an overvi e w of the Optio n 11C M ini syste m. Optio n 11 C M ini sy ste m d esc ri pt ion The Opt ion 11C Mini is a sma ll communi c a tio ns sys te m bas ed on ex isti ng Opt ion 11C technol ogy.
Pag e 18 of 332 Chapter 1 — Introduc i ng the Opti on 11C M in i 55 3-30 21-209 Stand ard 3.00 April 2000 You can configu re the Option 1 1C Mini as a no n-blocki ng system. You do no t have to provi s ion th e Option 11C Mini for spe ec h paths or tim e slot s .
Chapter 1 — Intr oduc i n g the Opt i on 11C Mini Pa ge 19 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Insta lling softwa re and con figur ing d ata The Opt ion 11C Mini s upport s a minimu m of X11 Relea se 24.24 so ftware. Ever ythi ng from g ene ral b usine ss fea tu re s to ad vanced appli cati ons are avai lable .
Pag e 20 of 332 Chapter 1 — Introduc i ng the Opti on 11C M in i 55 3-30 21-209 Stand ard 3.00 April 2000 Secur ity Device A S e cu ri ty De v ic e co me s wi th ea ch new O p tio n 1 1C M in i sy st em . A t t ach th e Se curi ty De vic e t o th e co mpo nent s ide of the MS C car d a t the t ime of i n it ial i nsta llati on.
Chapter 1 — Intr oduc i n g the Opt i on 11C Mini Pa ge 21 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Set-Based Ad ministra tion The Set -Base d Admi nist ration feat ure makes syst e m i nsta llati on and adm inist ration eas ier.
Pag e 22 of 332 Chapter 1 — Introduc i ng the Opti on 11C M in i 55 3-30 21-209 Stand ard 3.00 April 2000 •M e r i d i a n M A X • Meridi an Link / CC R • Sympos iu m Ca ll Ce nter • Sympos .
Chapter 1 — Intr oduc i n g the Opt i on 11C Mini Pa ge 23 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide The Cha s s is Expande r p rovid es four card slots. The Chassis Expander supp orts Meridi a n Mail Mini i n Slot 10 only. You can pl a ce a ny IP E car d in slo t s 7 , 8, 9, and 1 0.
Pag e 24 of 332 Chapter 1 — Introduc i ng the Opti on 11C M in i 55 3-30 21-209 Stand ard 3.00 April 2000 Backup / rese rve po wer You can configu re re s erve power using a n Unint erruptib le Power Sup ply (UPS). The Option 11C Mini s ystem doe s not include the UPS.
Chapter 1 — Intr oduc i n g the Opt i on 11C Mini Pa ge 25 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Res tor in g dat a If data beco mes c orrupt o r inope rable , you can restor.
Pag e 26 of 332 Chapter 1 — Introduc i ng the Opti on 11C M in i 55 3-30 21-209 Stand ard 3.00 April 2000.
Pa ge 27 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 44 Chapt er 2 — I den tify ing t he O ption 1 1C Mini equipment This chapt er describ es the main compone nts used to ins tall th e Option 11C Mi ni. Thi s chap t er al so d escr ibes the d i f fere nces bet w e en t h e O pti on 1 1 C Mi ni an d Option 11 C syst ems .
Pag e 28 of 332 Chapter 2 — Ident if yi ng the Opti on 11C Mini equi pment 55 3-30 21-209 Stand ard 3.00 April 2000 Chassis installation o ptions You can inst a ll the Ma in Cha ssis a nd Chas sis E.
Chapt er 2 — Ide ntif ying the O ptio n 11C Mi ni equip m ent Pa ge 29 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Figur e 2 25 -pai r cable conne ct ors on the back of t he Main C.
Pag e 30 of 332 Chapter 2 — Ident if yi ng the Opti on 11C Mini equi pment 55 3-30 21-209 Stand ard 3.00 April 2000 Figur e 3 Conn ectors on the back of t he M ain Chas sis Powe r co rd conne ctor S.
Chapt er 2 — Ide ntif ying the O ptio n 11C Mi ni equip m ent Pa ge 31 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Fig ure 4 s hows the c onnecto rs on the back of the Chass is Exp ander.
Pag e 32 of 332 Chapter 2 — Ident if yi ng the Opti on 11C Mini equi pment 55 3-30 21-209 Stand ard 3.00 April 2000 Powe r sw itch Th er e is a po w er sw it ch on th e front of t h e N TD K 9 1 Main Ch a ssi s and the NTDK92 Chass is Expand e r. Use this swi tch to turn the Opti on 11C Min i po wer on and off.
Chapt er 2 — Ide ntif ying the O ptio n 11C Mi ni equip m ent Pa ge 33 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Ta b l e 2 Asia P acific/ Cal a pow er supp ly DIP swi tc h set ti ngs In the As ia Pac ifi c / Ca la regio n, usage of the high vol ta g e Messag e Wait ing Lamp is option al.
Pag e 34 of 332 Chapter 2 — Ident if yi ng the Opti on 11C Mini equi pment 55 3-30 21-209 Stand ard 3.00 April 2000 Not e: S et th e dip swit c hes before t he s ystem powers up . Fig ure 5 shows t he powe r switch, power st atus indic a tor, and DIP swit ch se tti ngs.
Chapt er 2 — Ide ntif ying the O ptio n 11C Mi ni equip m ent Pa ge 35 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Res erv e pow er su pply You can use an Uninte rrupt ib le Power Supp ly (UPS) t o provi de a backup po wer supply for the NTDK91 and the NTDK92 chass is.
Pag e 36 of 332 Chapter 2 — Ident if yi ng the Opti on 11C Mini equi pment 55 3-30 21-209 Stand ard 3.00 April 2000 NTDK16 48-port Dig ital L ine Card The NTDK16 48-p ort Di git al Line Ca rd provide s an in terfac e to a maxi mum of 48 digit a l i ntegrated voic e and 48 da ta ports.
Chapt er 2 — Ide ntif ying the O ptio n 11C Mi ni equip m ent Pa ge 37 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Cab les and wires Tabl e 5 lists t he Opti on 11C Min i ca ble kits and thei r cont ents.
Pag e 38 of 332 Chapter 2 — Ident if yi ng the Opti on 11C Mini equi pment 55 3-30 21-209 Stand ard 3.00 April 2000 Tabl e 6 lists misc ella ne ou s c abl es and wires us ed with the Optio n 1 1C Mini .
Chapt er 2 — Ide ntif ying the O ptio n 11C Mi ni equip m ent Pa ge 39 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide NT AK19EC cab l e T he NT AK19EC is a two- port SDI c ab le us ed wit h the NT AK03 circ uit ca r d.
Pag e 40 of 332 Chapter 2 — Ident if yi ng the Opti on 11C Mini equi pment 55 3-30 21-209 Stand ard 3.00 April 2000 M iscell aneous items f o r ins tallatio n The fol lowing is a list of misce llan eous item s t hat yo u can us e a s part of Opt ion 11C Mini sys tem inst allat ion .
Chapt er 2 — Ide ntif ying the O ptio n 11C Mi ni equip m ent Pa ge 41 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide • addi tio nal Mod e m Eli minat or (NULL Mo dem witho ut har dware hands hakin g). The A0601 397 conve rter may be re quired to i nterfa ce th e DTE to th e system .
Pag e 42 of 332 Chapter 2 — Ident if yi ng the Opti on 11C Mini equi pment 55 3-30 21-209 Stand ard 3.00 April 2000 Po w e r • A C po wer only • u niv er s al po wer supply f actory instal led i.
Chapt er 2 — Ide ntif ying the O ptio n 11C Mi ni equip m ent Pa ge 43 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide • C: driv e on NTDK97 is 16 Mbyt es • Z: driv e on NTDK9 7 is 1.
Pag e 44 of 332 Chapter 2 — Ident if yi ng the Opti on 11C Mini equi pment 55 3-30 21-209 Stand ard 3.00 April 2000 48 -por t Digi tal Line Card O nl y the Op ti on 11C Mini system s uppor ts the NTDK1 6 48-po r t DLC .
Pa ge 45 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 68 Chapt er 3 — S yste m an d si te re quirements Before you i nsta ll the Opti on 11C Mini s yst em, mak e sure tha t the s ite mee ts all envir onment al, groun ding, power, an d cross -connec t termina l requi re ments .
Pag e 46 of 332 Chapter 3 — System and si te requi re m ents 55 3-30 21-209 Stand ard 3.00 April 2000 Eart hqua ke br aci ng re quir ement s fo r cha s s is i nst all ed on a wa ll in a ve rt ical p.
Ch apt er 3 — System and si te re quiremen ts Page 4 7 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Fa sten the mount ing bracke t for each chas sis to t h e piec e of plywood wi th the fi ve, 1 in. #14 screws su ppli e d wit h the br acket .
Pag e 48 of 332 Chapter 3 — System and si te requi re m ents 55 3-30 21-209 Stand ard 3.00 April 2000 The fol lowing are addi tional gr oundi ng re q uire m ent s: • Ground conductors f or the Option 11C Mi ni sys tem: — must not be smal ler t han #6 AWG ( #40 metri c ) at any point (see Tabl e 10 on page 49.
Ch apt er 3 — System and si te re quiremen ts Page 4 9 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide • All c o n duc tor s m u st t erm i nat e in a p e r man e n t wa y . M ak e su r e al l t ermina t i ons are easi ly visible and ava ilabl e for mainte na n ce pur poses.
Pag e 50 of 332 Chapter 3 — System and si te requi re m ents 55 3-30 21-209 Stand ard 3.00 April 2000 Groun d bus isolation (Canada and the United States) Accord ing to the exce pti on to artic le 38 4-20 in the Unit ed State s Natio nal Ele ctric a l Code (NE C), a pane l’s ground bus can be isol a ted from the ho us ing.
Ch apt er 3 — System and si te re quiremen ts Page 5 1 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Protection Co rrect groundin g is a ne cess ary co mponent of t he protec tion system for equi pm ent.
Pag e 52 of 332 Chapter 3 — System and si te requi re m ents 55 3-30 21-209 Stand ard 3.00 April 2000 You can use an y of the fol lowi ng busbars a s a syste m SPG: • build ing princi pal ground ,.
Ch apt er 3 — System and si te re quiremen ts Page 5 3 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Gr ou ndi ng me thod The meth od of grou nding us e d for th e Opt io n 11C Min i d epe nds on whethe r the sa me se rvic e pan el p owers al l cha ssi s.
Pag e 54 of 332 Chapter 3 — System and si te requi re m ents 55 3-30 21-209 Stand ard 3.00 April 2000 Chassis p owered by differen t se rvice p anels For each Main Cha ssis, c onnect a #6 AWG (#40 Me tri c Wire Gauge ) grou nd wi re from the chas sis to th e NTBK80 gr ound ing bloc k.
Ch apt er 3 — System and si te re quiremen ts Page 5 5 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Com m e rc ia l po w e r re qu ir e m e nt s The Opt ion 11C Mini s ystem is ava ila ble with AC-power onl y.
Pag e 56 of 332 Chapter 3 — System and si te requi re m ents 55 3-30 21-209 Stand ard 3.00 April 2000 Ta b l e 1 1 A C input requirement s for each NTDK91 and NTDK92 (North America) Vo l t a g e R e.
Ch apt er 3 — System and si te re quiremen ts Page 5 7 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Site requirem en ts The fol lowi ng is a lis t of requi red site fea tur e s for an opt imal Option 11C Mi ni AC-powe red sys t em ins talla tion.
Pag e 58 of 332 Chapter 3 — System and si te requi re m ents 55 3-30 21-209 Stand ard 3.00 April 2000 Lo cat io n of po we r ou t lets The maxi m um dist a nce be tween a powe r outle t and t he syste m chas s is depe nds on the lengt h of the powe r cord .
Ch apt er 3 — System and si te re quiremen ts Page 5 9 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Receptacl es Rece ptac le re qui rements a re a s fol l ows: • Whe n insta ll ed o n the wall , i nsta ll re cept acles wit hin rea c h of t he ch assi s po wer cor ds.
Pag e 60 of 332 Chapter 3 — System and si te requi re m ents 55 3-30 21-209 Stand ard 3.00 April 2000 Powe r the tr ansfor mer p rimary through a dedic ated circ uit. If the p rimary ha s a plugga bl e cord , m ake an addi tional ground conne ct ion between the Opt ion 11C Mini SPG and a known bui ldi ng ground referenc e.
Ch apt er 3 — System and si te re quiremen ts Page 6 1 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Figur e 7 Ty pica l pluggabl e c ord I solati on Trans f or me r wiring pl an • • • • •• • 553-8322.EPS Notes: 1 Power source is site dependent.
Pag e 62 of 332 Chapter 3 — System and si te requi re m ents 55 3-30 21-209 Stand ard 3.00 April 2000 T ran sfo rmer s w ith out pl ug gab le p owe r c ord s If t he tra ns f orm er does not hav e a plu ggab l e cord, hardwi re the tra nsform er t o an el ec trica l panel.
Ch apt er 3 — System and si te re quiremen ts Page 6 3 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Figur e 8 Ty pical hardwir ed Isol ation Tr ansformer wir ing pl an • • • • • • • 553-8323.EPS Notes: 1 Power source is site dependent.
Pag e 64 of 332 Chapter 3 — System and si te requi re m ents 55 3-30 21-209 Stand ard 3.00 April 2000 Powe r c onsum ption worksh eet s for t he Opti on 11C Mi ni sy stem Use th e workshe ets (T abl es 15 to 17) in th is se ction t o dete rmine the powe r cons umpti on for the Option 11C Mini sys tem.
Ch apt er 3 — System and si te re quiremen ts Page 6 5 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Ta b l e 1 5 Option 11C Min i po w er consumpt ion: M ain Chassis Ta b l e 1 6 Opt.
Pag e 66 of 332 Chapter 3 — System and si te requi re m ents 55 3-30 21-209 Stand ard 3.00 April 2000 A ux ili ary e qu ip men t p ow er Termin als, prin te r s, modems, and ot he r data unit s use d with the Opt ion 11C Mi ni req uire spe cial wiring consid e rati ons.
Ch apt er 3 — System and si te re quiremen ts Page 6 7 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide M ai nt ena nce an d ad mi nistr ati on t er mina ls Refe r to “Termina l setup” on page 201 for inform ation about setti ng up t ermina l s rec om mended f or use with the Opti on 11C Mini syst e m.
Pag e 68 of 332 Chapter 3 — System and si te requi re m ents 55 3-30 21-209 Stand ard 3.00 April 2000 Mer idi a n Ad mi n ist ra t i on To ol s The Opt ion 11C Mini support s the Meri di a n Admini stration Tools (MAT) appl ic ati on.
Pa ge 69 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 82 Chapt er 4 — C rea ting a n eq uip ment layout pla n and a card slot assignment plan Take so me time to pl an the ins ta l l at ion of the Opti on 11C Mini . T his pr eparat ion helps to mak e sure that t he syste m perf orm s c orrect ly.
Pag e 70 of 332 Chapter 4 — Cr eating an equipment layou t plan and a card sl ot as si gnment pl an 55 3-30 21-209 Stand ard 3.00 April 2000 — ve r ti call y on a wall — ho r iz ontally on a wall • in a ra ck / ca b in et •o n a t a b l e Eac h Opti on 11C Mini chassis me asur es 8 .
Chapter 4 — Cr eating an equipment layou t plan and a card sl ot assi gnment plan Page 71 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Figur e 9 Ty pica l layout f or instal ling th e chassi s on a wall in a horiz ontal posi ti on Not e: L ea v e w al l sp ac e fo r th e cr o ss- c o nn e ct ter m inal .
Pag e 72 of 332 Chapter 4 — Cr eating an equipment layou t plan and a card sl ot as si gnment pl an 55 3-30 21-209 Stand ard 3.00 April 2000 Figur e 10 Ty pica l la yout for ins tal l i ng the ch assi s on a wall i n a verti cal posit ion Not e: L ea v e w al l sp ac e fo r th e cr o ss- c o nn e ct ter m inal .
Chapter 4 — Cr eating an equipment layou t plan and a card sl ot assi gnment plan Page 73 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Equ ipm ent lay out pl an for ins talling the c.
Pag e 74 of 332 Chapter 4 — Cr eating an equipment layou t plan and a card sl ot as si gnment pl an 55 3-30 21-209 Stand ard 3.00 April 2000 Figur e 11 Ty pica l layout for ins tal ling th e c hassi s on a table Not e: L ea v e w al l sp ac e fo r th e cr o ss- c o nn e ct ter m inal .
Chapter 4 — Cr eating an equipment layou t plan and a card sl ot assi gnment plan Page 75 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Equ ipmen t layou t plan f or ins talling the cha ssis in a rack/ cabinet You can inst a ll the Ma in Cha ssis a nd Cha ssis Expa nder in a 19 i nch ra ck /ca b i net .
Pag e 76 of 332 Chapter 4 — Cr eating an equipment layou t plan and a card sl ot as si gnment pl an 55 3-30 21-209 Stand ard 3.00 April 2000 Figur e 12 Ty pica l layout f or ins tal l i ng th e chassi s i n a rack /ca bi ne t Not e: L ea v e w al l sp ac e fo r th e cr o ss- c o nn e ct ter m inal .
Chapter 4 — Cr eating an equipment layou t plan and a card sl ot assi gnment plan Page 77 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide C ar d slo t ass ig nme nt s Pre par e a c a rd slot assign m ent pla n i n a dva n ce . The ca rd sl ot al locat ion pla n shows circui t card to slot assignm ents .
Pag e 78 of 332 Chapter 4 — Cr eating an equipment layou t plan and a card sl ot as si gnment pl an 55 3-30 21-209 Stand ard 3.00 April 2000 To pre pare a p la n fo r card s lot a ssign m ent, wri te the total number of c ircu it card s required for the ins ta ll a t ion in Tabl e 18.
Chapter 4 — Cr eating an equipment layou t plan and a card sl ot assi gnment plan Page 79 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Not e 1: Inst al l the NT6D70 SI L C car d in the Main Cha s sis (Slo ts 1, 2, or 3) if it is u se d as a cl ock contro ller.
Pag e 80 of 332 Chapter 4 — Cr eating an equipment layou t plan and a card sl ot as si gnment pl an 55 3-30 21-209 Stand ard 3.00 April 2000 Se e Figu re s 13 and 14 for the card s lot a ss ignm e nts in the Ma in Cha ss i s and Ch as s is Expande r.
Chapter 4 — Cr eating an equipment layou t plan and a card sl ot assi gnment plan Page 81 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Figur e 14 Card slot assignm ents for th e Chassis Exp ander Not e: Re fer t o Tabl e 18 on page 78 for a lis t of cards th at you c an insert i n the Chass is Expa nder.
Pag e 82 of 332 Chapter 4 — Cr eating an equipment layou t plan and a card sl ot as si gnment pl an 55 3-30 21-209 Stand ard 3.00 April 2000.
Pa ge 83 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 90 Chapt er 5 — R egu lato ry in form atio n This chapt e r inclu des regula tory in formation for Am eri can, Canadian , and In ter nationa l in s t al lati ons of t he Opti on 11C Mini.
Pag e 84 of 332 Chapter 5 — Regulator y infor m ati on 55 3-30 21-209 Stand ard 3.00 April 2000 If your Merid ian 1 Option 1 1C Min i equip ment c ause s harm t o the te le phone networ k, the te lep hone com p any c an di scont inue your service tempora rily.
Chapter 5 — Regu l ator y inform ation Page 8 5 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Before you insta l l a ny eq uipmen t, m ust make s ure t hat i t ca n connec t to the fa ci litie s o f t he lo cal telec ommu nic at ions compa ny.
Pag e 86 of 332 Chapter 5 — Regulator y infor m ati on 55 3-30 21-209 Stand ard 3.00 April 2000 Eur opean comp liance in formatio n The Opt ion 11C Mini meets t he fol lowing E uropean t e chni c al re gula tions: CTR 1, CTR 2, C TR 3, CTR 4, CT R 6 , CT R 10, CT R 12, CTR 13, CTR 1 5, CTR 17, CTR 22, CTR 24, and th e I-ETS 300 131.
Chapter 5 — Regu l ator y inform ation Page 8 7 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide FC C com pliance : regis t ered equ ipmen t for Direc t Inward Dial (D ID) cal ls Part 68 of the FCC’s rules state th at equipment register ed for Di re ct Inward Di al (DID) call s mus t provi de corre ct a nswer super visio n.
Pag e 88 of 332 Chapter 5 — Regulator y infor m ati on 55 3-30 21-209 Stand ard 3.00 April 2000 Ta b l e 2 0 Netw ork connecti on speci f icat ions Po r t s M T S / WA T S Fa cili ty Interf ace Code.
Chapter 5 — Regu l ator y inform ation Page 8 9 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide If the Option 11C Mini c auses i nterfe rence to ra dio or t elevi s ion receptio n, t ry to cor rect the inte rferen c e usi ng the fol lo w ing measur es.
Pag e 90 of 332 Chapter 5 — Regulator y infor m ati on 55 3-30 21-209 Stand ard 3.00 April 2000.
Pa ge 91 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 10 0 Chapt er 6 — I nst alling t he O pt ion 11 C Mini This cha pt er con ta i ns tool s and readin es s chec kl ists. Before begi nni ng the i ns talla tion, mak e su re you ha ve all th e tool s nece ssar y to inst al l the O p ti on 11 C Mini.
Pag e 92 of 332 Chapter 6 — Inst all i ng the Opti on 1 1C Mini 55 3-30 21-209 Stand ard 3.00 April 2000 Rea di ne ss ch eck lis t Have you: re ad a ll saf ety instru ctions in “Cha pter 7 — Imp.
Chapte r 6 — Install ing t he Opt ion 11 C Mi ni Pa ge 9 3 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 5 If your Opt ion 11 C Mi ni s ystem require s e arthqua ke br acing, r efer to “Cha pter 8 — Brac ing th e Opti on 11C Mini a gai nst earth quakes ” on page 10 5.
Pag e 94 of 332 Chapter 6 — Inst all i ng the Opti on 1 1C Mini 55 3-30 21-209 Stand ard 3.00 April 2000 Refe r to one of the foll owing proce dures: — Proc edure 7 : “ Groundi ng the Opt ion 11.
Chapte r 6 — Install ing t he Opt ion 11 C Mi ni Pa ge 9 5 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 12 In stall the Mi ni S yste m Con trolle r (MSC) card and the 48 -port Digit a l Lin e Ca rd . a Ins ta ll th e S ec u ri t y D ev i ce on th e N TD K 9 7 M S C ca rd .
Pag e 96 of 332 Chapter 6 — Inst all i ng the Opti on 1 1C Mini 55 3-30 21-209 Stand ard 3.00 April 2000 17 If Et hernet is re qui re d , insert an indus try- st and a rd Me di um Access Uni t (MAU) di rec tl y into th e E t her ne t conne ctor at the ba ck of the cha ssis.
Chapte r 6 — Install ing t he Opt ion 11 C Mi ni Pa ge 9 7 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 27 Re p l ace the f ac eplat e. a Fi t th e bra ck e ts at the bo tto m of th e fac ep l at e in to th e r ai sed edg e at th e bo tt o m of th e cha s s i s.
Pag e 98 of 332 Chapter 6 — Inst all i ng the Opti on 1 1C Mini 55 3-30 21-209 Stand ard 3.00 April 2000 Figur e 17 Fitt ing the fa cepl at e on to the fr ont of the chassi s c Sl id e th e fa ce pl at e to the ri ght , an d tig ht en th e qui ck -r el ea se sc rew s i n to th e two holes at th e top of th e chas sis .
Chapte r 6 — Install ing t he Opt ion 11 C Mi ni Pa ge 9 9 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Figur e 18 Pus hing the faceplat e down into plac e to align wit h chassi s Pu.
Pag e 100 o f 332 Chapter 6 — Inst al ling th e Opti on 11C Mini 55 3-30 21-209 Stand ard 3.00 April 2000.
Pag e 101 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 10 4 Chapt er 7 — I m port ant safety inst ruct ions Symbo ls you mu s t re c o gnize When y ou see the s y m bol s hown b elow on Opt ion 11C Mini equipm ent or do cumen tat io n, look f or imp orta nt ope r a ting and main tenanc e in struc tions .
Pag e 102 o f 332 Chapter 7 — Import ant safe ty inst r u cti ons 55 3-30 21-209 Stand ard 3.00 April 2000 Safe ty in st ruct io ns wh en inst all ing t ele pho ne equi pme nt The fol lowing are sa fety ins tr uctions for ins tal ling teleph one equip m ent: • Never instal l te lephone w irin g during a l ightni ng st orm.
Cha pte r 7 — Impor tant saf ety ins truct ions Pag e 103 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide • Some equi pment has a th ree -wire grou nding pl ug. Thi s type of p lug ha s a third groundi ng pin. As a safety feat ure, the plug onl y fits int o an i so lated gr ound outle t.
Pag e 104 o f 332 Chapter 7 — Import ant safe ty inst r u cti ons 55 3-30 21-209 Stand ard 3.00 April 2000.
Pag e 105 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 11 4 Chapt er 8 — Bra cing the O pti on 11C Min i against e arthqua kes This chapt e r provide s th e recom mended ins ta llati on meth od for br ac ing the Opt ion 11C Mini sys tem aga inst ear thquakes.
Pag e 106 o f 332 Chapt er 8 — Br acing the O pti on 11C M ini agai nst ea rthquak es 55 3-30 21-209 Stand ard 3.00 April 2000 When you have det ermi ned th e requi r ed backboar d siz e, make sure the m easur ements are with in t he li m it s l i sted i n Table 2 1.
Chapter 8 — Br acing the Opt ion 11C Mini agai nst e arthqua kes Pag e 10 7 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Ta ble 23 provides the hardware recommend at ions for ear thquak e braci ng. Ta ble 24 lis ts the maximu m si zes of wall st uds wi th a 16-inc h spaci ng.
Pag e 108 o f 332 Chapt er 8 — Br acing the O pti on 11C M ini agai nst ea rthquak es 55 3-30 21-209 Stand ard 3.00 April 2000 Ta ble 25 lis ts the maximu m sizes of wall st uds wi t h a 24-inc h spacing.
Chapter 8 — Br acing the Opt ion 11C Mini agai nst e arthqua kes Pag e 10 9 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 3 Det ermine where t o place the f astener s Refer to Figur es 19 thr ough 21 i f you ne ed help with where t o place t h e fast eners on the backbo ar d.
Pag e 110 o f 332 Chapt er 8 — Br acing the O pti on 11C M ini agai nst ea rthquak es 55 3-30 21-209 Stand ard 3.00 April 2000 Figur e 19 Plywood fa st en er loc ations fo r wood and metal st ud wall s — 16 inch spaci ng 553-8336.EPS 12 in. 16 in.
Chapter 8 — Br acing the Opt ion 11C Mini agai nst e arthqua kes Pag e 11 1 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Figur e 20 Plywood fa st en er loc ations fo r wood and metal st ud wall s — 24 inch spaci ng 553-8337 12 in.
Pag e 112 o f 332 Chapt er 8 — Br acing the O pti on 11C M ini agai nst ea rthquak es 55 3-30 21-209 Stand ard 3.00 April 2000 Figur e 21 Plywood fa st en er loc ations fo r concr et e and masonry wa ll s 553-8338 24 in. Fasteners Fasteners 24 in. 24 in.
Chapter 8 — Br acing the Opt ion 11C Mini agai nst e arthqua kes Pag e 11 3 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 4 Cont i nue with Option 11C Mini system inst allat ion Now that you have secu rely fa stened th e backbo ard to the wal l, you ca n cont i nue wi th t he Opt ion 11 C Mini syst em Inst allati on.
Pag e 114 o f 332 Chapt er 8 — Br acing the O pti on 11C M ini agai nst ea rthquak es 55 3-30 21-209 Stand ard 3.00 April 2000.
Pag e 115 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 13 4 Chapt er 9 — I nst alling the c h ass is This chapt er descri be s the four meth ods you can us e to ins tall th e Option 11C Mi ni ch a ssis.
Pag e 116 o f 332 Chapter 9 — Inst al ling th e chass i s 55 3-30 21-209 Stand ard 3.00 April 2000 Insta llin g the ch ass is on a wa ll in a ve rtica l p os it ion Items r equ ired To i nstall t he.
Ch apt er 9 — Insta ll i ng t he chassi s Page 11 7 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Figur e 22 Ty pical l ayout f or instal ling the c hassis on a wall in a verti cal p osi ti on Not e: L ea ve sp ac e f or t he cr o ss- c onn e ct t er mi nal .
Pag e 118 o f 332 Chapter 9 — Inst al ling th e chass i s 55 3-30 21-209 Stand ard 3.00 April 2000 Pro cedure 2 Inst al li ng the Option 11C Mini c hass is on a w all in a ver ti cal posit i on 1 Dr aw the verti cal cen t er l in e of t he cha ssis on the p lywood ba ckboard.
Ch apt er 9 — Insta ll i ng t he chassi s Page 11 9 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 3F a s t e n the chassi s brac ket to the back of the chassi s usi ng t he four #8- 32 machine screws suppli ed w it h th e bra cket ki t.
Pag e 120 o f 332 Chapter 9 — Inst al ling th e chass i s 55 3-30 21-209 Stand ard 3.00 April 2000 Figur e 25 Chas sis on a wall in a vert ical pos ition 6 If you want t o i nstal l a Ch assi s Expander , repeat t he above st eps. Refer to the equip m ent l ayout plan for the m easur ements and wher e to pla c e the Chassi s Expand er.
Ch apt er 9 — Insta ll i ng t he chassi s Page 12 1 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Insta llin g the ch ass is on a wa ll in a hor izo ntal po si tion Items r equ ired T.
Pag e 122 o f 332 Chapter 9 — Inst al ling th e chass i s 55 3-30 21-209 Stand ard 3.00 April 2000 Figur e 26 Ty pica l layout f or instal ling th e c hassi s on a wall in a horiz ontal positi on Not e: L ea ve sp ac e f or t he cr o ss- c onn e ct t er mi nal .
Ch apt er 9 — Insta ll i ng t he chassi s Page 12 3 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Pro cedure 3 Inst al li ng the Option 11C Mini chass is on a w a ll in a hori zontal posit ion 1 Dr aw two vert ica l lines 18.5 inc hes apart on the plywood ba ckboar d.
Pag e 124 o f 332 Chapter 9 — Inst al ling th e chass i s 55 3-30 21-209 Stand ard 3.00 April 2000 Figur e 27 Thu mb scr ew s on the wall shel f bra cket s 5 Place th e chassi s on the shel f br acket s. Caref ully sl ide t he chass is on t h e wall shelf b racket s un til i t touches t h e ch assi s stops on the brac kets.
Ch apt er 9 — Insta ll i ng t he chassi s Page 12 5 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Figur e 28 Chas sis stops on the wall shel f brackets 6 Fa sten the chassis in posi tion usi ng the four th umb screws, locat ed on t he bottom sid e of the shelf bracket s.
Pag e 126 o f 332 Chapter 9 — Inst al ling th e chass i s 55 3-30 21-209 Stand ard 3.00 April 2000 Figur e 29 Cha ssis install ed on a wa ll in a ho rizont al posit i on 8 If y ou want to i nstall a Chassis Ex pander on a wal l in a hor izonta l pos it ion, repe at the above ste ps f or the Chassi s Expander .
Ch apt er 9 — Insta ll i ng t he chassi s Page 12 7 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Figur e 30 Ty pica l layout for ins tal ling th e c hassi s on a table Not e: L ea v e w al l sp ac e fo r th e cr o ss- c o nn e ct ter m inal .
Pag e 128 o f 332 Chapter 9 — Inst al ling th e chass i s 55 3-30 21-209 Stand ard 3.00 April 2000 Pro cedure 4 Inst al li ng the Option 11C Mini c hass is on a t ab le 1 Place th e chassi s upside dow n on a horizo ntal work surf ace. 2 Fa sten t h e f our rubbe r f eet sec urely to t he bott om of the ch assis us ing th e mach ine scr ews.
Ch apt er 9 — Insta ll i ng t he chassi s Page 12 9 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 3 Place th e chassi s ri ght side up on the rubbe r fee t . 4 Pos it ion the chassi s so t hat the ai r inlet s a nd exhaust s are free from any obst r uctio ns.
Pag e 130 o f 332 Chapter 9 — Inst al ling th e chass i s 55 3-30 21-209 Stand ard 3.00 April 2000 Figur e 32 Ty pica l layout f or instal l i ng the ch assi s in a rack/ca bi ne t Not e 1: Leave wall space for the c r oss-conne ct terminal . Not e 2: The rack/cab inet does not ha ve t o be right aga i nst t he wall .
Ch apt er 9 — Insta ll i ng t he chassi s Page 13 1 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Pro cedure 5 Inst al li ng the Option 11C Mini chass i s in a 19 inch ra ck/ca bine t 1 Fa sten t he left chassis guide bracket to t he left rack/ cabinet su pport.
Pag e 132 o f 332 Chapter 9 — Inst al ling th e chass i s 55 3-30 21-209 Stand ard 3.00 April 2000 3 At tach the le ft ear brac ket (marked w ith an “L”) to the hol es on the lef t side of the chas sis (near th e fr ont) . Use two #8-3 2 mac hine scr ews.
Ch apt er 9 — Insta ll i ng t he chassi s Page 13 3 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 6 Use the four r emaining #12-24 self- tappin g s crews to f ast en the ch assi s to the ra ck/ cabinet support s (t wo screw s on each si de).
Pag e 134 o f 332 Chapter 9 — Inst al ling th e chass i s 55 3-30 21-209 Stand ard 3.00 April 2000 Note: In add ition t o more O ptio n 1 1C Mini c hassis, you can inst all other Data Communi catio ns Equi pment in a rack /cabi net wi th t he Opt i on 11C Mi ni .
Pag e 135 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 13 8 Chapt er 10 — Con nect ing t he Ch assis Expander to the Main Chassis This chapt er describ e s how to add a Chas s is Expa nder to your Opti on 11C Mi ni s y stem.
Pag e 136 o f 332 Chapter 10 — Connect in g the Chas sis Ex pande r to the Main Chas sis 55 3-30 21-209 Stand ard 3.00 April 2000 5 Tight en t he scr ews on the conne ctors.
Cha pter 10 — Connecting th e Ch assis Expan der t o the Mai n Ch assi s Pag e 137 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 8 Foll ow t he proce dures for start ing the Opti on 11C Mini in “Ch apte r 16 — St ar ti ng the Option 11C Mini and ins tal l i ng so ftware” on page 209 .
Pag e 138 o f 332 Chapter 10 — Connect in g the Chas sis Ex pande r to the Main Chas sis 55 3-30 21-209 Stand ard 3.00 April 2000.
Pag e 139 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 14 6 Chapter 11 – Installing the system ground This cha pt er desc rib es how to ground the Opti on 11C Mini cha ssi s .
Pag e 140 o f 332 Chapter 11 – Insta l li ng the syst em ground 55 3-30 21-209 Stand ard 3.00 April 2000 Co nside r t he Ma in Chas s is and the C hassis Exp a nder a s the s ame ground. Jump er the g round w ire from th e Cha ssi s Ex pande r to the Ma in Chassi s.
Ch apte r 11 – Ins tallin g the sys t em gr ound Page 14 1 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Cha ss is gr ou ndi ng in st ruct io ns Proc edure 7 d escribe s how t o grou nd the Op tio n 11C Mini Main Ch assis and Chassi s E xp ander .
Pag e 142 o f 332 Chapter 11 – Insta l li ng the syst em ground 55 3-30 21-209 Stand ard 3.00 April 2000 Figur e 37 NTBK80 ground block 3 Cons ider each Main Chass is and Chass i s Expan der pai r as one ground. Jumper the Chassis Expander gr ound to th e Main Chas sis gr ound.
Ch apte r 11 – Ins tallin g the sys t em gr ound Page 14 3 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Figur e 38 Gr ounding a Main Ch assis a nd Chassi s Expander pair 5 C onn ect t he ground ing block to the gr oun d bus i n t he AC p ower se rvi ce panel, using #6 AWG wire.
Pag e 144 o f 332 Chapter 11 – Insta l li ng the syst em ground 55 3-30 21-209 Stand ard 3.00 April 2000 Pro cedure 8 UK gr ound i ng pr oc edure fo r the Option 11C Mini chas sis 1 Conn ect a prot ect i v e and funct ional gr ound wir e from the groundi ng st r ip on th e Krone Test J ack Fram e to t h e ground at the buil ding entr y point.
Ch apte r 11 – Ins tallin g the sys t em gr ound Page 14 5 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Figur e 39 Groundi ng multipl e p ieces o f equi pm ent in a r ack 7 8 9 1 0 .
Pag e 146 o f 332 Chapter 11 – Insta l li ng the syst em ground 55 3-30 21-209 Stand ard 3.00 April 2000.
Pag e 147 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 16 8 Chapt er 12 — Inst all ing the circu it car d s This cha pt er desc r ib es h ow and wher e to inst al l circui t cards u se d in the Opt ion 11C Mini sys tem.
Pag e 148 o f 332 Chapter 12 — Inst al ling t he ci r cu it card s 55 3-30 21-209 Stand ard 3.00 April 2000 Refer to the Intel li gen t P eri pher al Equipme nt Ci rc uit Car d S uppl e men ts for fu ll de s cri ptions of count ry-spe cific IPE c ards and t h eir install ation pr ocedure s .
Cha pter 12 — Ins talli ng the circ uit cards Page 14 9 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Figur e 41 Circu it ca rd assi gnments i n the Main Cha ssis Not e 1 : See Tabl e 18 on page 78 for the c ards th at you can insert i n the Main Cha ssis.
Pag e 150 o f 332 Chapter 12 — Inst al ling t he ci r cu it card s 55 3-30 21-209 Stand ard 3.00 April 2000 Figur e 42 Circu it ca rd assi gnments i n the Chassis Expander Not e 1 : See Tabl e 18 on page 78 for the c ards th at you can insert i n the Ch as s is Expande r.
Cha pter 12 — Ins talli ng the circ uit cards Page 15 1 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Ci rcui t ca rds re quired for t he O pti on 1 1C Mi ni If a ci rcuit c ard has a sym bol of a s witc h on it s fac eplat e, it i s e qui ppe d with op tion swi tches, strap ping pl ugs, or both.
Pag e 152 o f 332 Chapter 12 — Inst al ling t he ci r cu it card s 55 3-30 21-209 Stand ard 3.00 April 2000 PCMCIA i n t e rfac e The NTDK97 MSC c a rd has a 2-s lot PCMCIA i nterfa ce s ocket loca ted o n i ts fa ce plate . You can ins e rt a Softwa re Deliv ery card in to the soc ke t.
Cha pter 12 — Ins talli ng the circ uit cards Page 15 3 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Digitone Receiver, ton e generation, tone d etec tion fu nctions The NTDK9 7 MSC.
Pag e 154 o f 332 Chapter 12 — Inst al ling t he ci r cu it card s 55 3-30 21-209 Stand ard 3.00 April 2000 Figur e 43 MSC card with the securi ty device i nst al led 3 Inser t the NTDK97 MSC card i n the CPU slot ( slot 0) of t h e Main Chas sis . 4 Loc k the l atche s on t he card.
Cha pter 12 — Ins talli ng the circ uit cards Page 15 5 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide NTDK16 48-port Digital L ine Card The NTDK16 48-p ort Di git al Line Ca rd provide s an in terfac e to a maxi m u m of 48 digit a l i ntegra ted vo ice and data s ets .
Pag e 156 o f 332 Chapter 12 — Inst al ling t he ci r cu it card s 55 3-30 21-209 Stand ard 3.00 April 2000 Not e 1: Y ou ca n only plac e t he NTDK16 Digi tal Li ne Card i n sl ot 4 of the Ma in C h as sis . Not e 2: T h e Option 11C Mini syst em does not re quire the NTDK16 Di gital Line Card to op erate .
Cha pter 12 — Ins talli ng the circ uit cards Page 15 7 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Ta b l e 2 8 NT8D1 4 Univer s al t runk — modes and opt ion sett ings 2 Inser t the card in i ts assi gned slot .
Pag e 158 o f 332 Chapter 12 — Inst al ling t he ci r cu it card s 55 3-30 21-209 Stand ard 3.00 April 2000 Ta b l e 2 9 NT8D1 5 E&M T run k car d opti on set t ings 2 Inser t the card in i ts assi gned slot .
Cha pter 12 — Ins talli ng the circ uit cards Page 15 9 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide •E S D I • DCH/DPN SS The NTAK02 SDI/ DCH card us es jump er plu gs t o conf.
Pag e 160 o f 332 Chapter 12 — Inst al ling t he ci r cu it card s 55 3-30 21-209 Stand ard 3.00 April 2000 Ta b l e 3 0 Switc h s ett ings (P or ts 0 and 1) T abl e 31 S w it ch se t ti ng s ( Por ts 2 an d 3) Ta b l e 3 2 J umper sett ings 2 Inser t the card in i ts assi gned slot .
Cha pter 12 — Ins talli ng the circ uit cards Page 16 1 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide NTAK03 TDS/DTR ca rd The NTDK97 MSC card pr ovides the NTAK03 TDS/DTR ca rd functi ona l ity. Ho w eve r, t he TD S/ D TR c ar d ca n ex is t wi th t he M S C ca r d i f y o u w an t t o acc ess a ddi tional TDS /DTR unit s.
Pag e 162 o f 332 Chapter 12 — Inst al ling t he ci r cu it card s 55 3-30 21-209 Stand ard 3.00 April 2000 NT AG26 XMF R car d The NT DK97 MSC card prov ides the func ti onalit y of the Exte nded Multi -frequency Receive r ( XM FR) c ard.
Cha pter 12 — Ins talli ng the circ uit cards Page 16 3 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide NT 5K21 XMF C card The NT DK9 7 MSC card prov ides the func ti ona l it y of the Extende d Multi -frequency Compelle d Sende r/R eceiver (XMFC) card.
Pag e 164 o f 332 Chapter 12 — Inst al ling t he ci r cu it card s 55 3-30 21-209 Stand ard 3.00 April 2000 NT 1R20 Of f-Pr emise Station (OPS) an alog lin e card The OPS a na l og l ine c a rd provid e s e i gh t OPS lines.
Cha pter 12 — Ins talli ng the circ uit cards Page 16 5 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Ta bl e 33 provi des OPS anal og lin e card con fi gurat i on i n form at ion.
Pag e 166 o f 332 Chapter 12 — Inst al ling t he ci r cu it card s 55 3-30 21-209 Stand ard 3.00 April 2000 Figur e 46 OPS analog line card: j umper b lock l ocatio ns Jumper bloc k lo cat ion s.
Cha pter 12 — Ins talli ng the circ uit cards Page 16 7 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Figur e 47 OPS analog li ne card cross conne ctions Dig ital Tr unk car ds The Opt ion 11C Mini s upport s the fol l owi ng digi tal trun k card s: • NTAK09 1.
Pag e 168 o f 332 Chapter 12 — Inst al ling t he ci r cu it card s 55 3-30 21-209 Stand ard 3.00 April 2000 • NTRB21 1.5 Mbit DT I/PRI • NT6D70 SILC (when us ed as a clock cont roll e r) Not e: T he d igita l trunk card s ca n be in stal led o nly in slo ts 1 -3 o f t he Main Cha ssis.
Pag e 169 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 18 4 Chapt er 13 — Inst all ing and conn ectin g the cros s-co nnect ter m inal This chapt er descri bes how t o ins tall and .
Pag e 170 o f 332 Chapter 13 — Inst al ling and connect i ng t he cross - c onnec t term in al 55 3-30 21-209 Stand ard 3.00 April 2000 For inform ation about 1. 5 Mb it a nd 2.0 Mbit DTI/PRI-re la ted wiring and cabl es, refe r to the follo w i ng doc um ent s: • Opt ion 11C 1.
Ch apt er 13 — Inst all i ng and connect in g t he cr oss- con nect t er mi na l Pag e 171 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide • one 25-pa ir c able from each QUA6 PFTU .
Pag e 172 o f 332 Chapter 13 — Inst al ling and connect i ng t he cross - c onnec t term in al 55 3-30 21-209 Stand ard 3.00 April 2000 Figur e 48 Ty pica l BIX cross- connect t er minal layo ut Not e: One 25-pai r c able c ontains Card 4 an d Card 6 (un its 0-7).
Ch apt er 13 — Inst all i ng and connect in g t he cr oss- con nect t er mi na l Pag e 173 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Figur e 49 Ty pica l Reichle Masa ri cross- connec t t er m inal lay out (Ge rmany) Not e: One 25-pai r c able c ontains Card 4 an d Card 6 (un its 0-7).
Pag e 174 o f 332 Chapter 13 — Inst al ling and connect i ng t he cross - c onnec t term in al 55 3-30 21-209 Stand ard 3.00 April 2000 3 At tac h label s on t he cr oss- connect terminal to indica .
Ch apt er 13 — Inst all i ng and connect in g t he cr oss- con nect t er mi na l Pag e 175 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Figur e 50 25 -pai r cable on thr ee Krone st.
Pag e 176 o f 332 Chapter 13 — Inst al ling and connect i ng t he cross - c onnec t term in al 55 3-30 21-209 Stand ard 3.00 April 2000 Proc edure 21 describe s how to install th e Krone Test Jack Frame for the UK.
Ch apt er 13 — Inst all i ng and connect in g t he cr oss- con nect t er mi na l Pag e 177 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Figur e 51 Ty pica l Krone cross- conne ct te rmina l layout ( U K) Not e: One 25-pai r c able c ontains Card 4 an d Card 6 (un its 0-7).
Pag e 178 o f 332 Chapter 13 — Inst al ling and connect i ng t he cross - c onnec t term in al 55 3-30 21-209 Stand ard 3.00 April 2000 3 Atta ch l a bel s on the cross- connect ter minal to indi ca.
Ch apt er 13 — Inst all i ng and connect in g t he cr oss- con nect t er mi na l Pag e 179 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide For 1.5 M b it and 2.0 Mbit DTI/ PRI-re la ted wiring and cable i nform at ion, refe r t o the followi ng doc um ents: • Opt ion 11C 1.
Pag e 180 o f 332 Chapter 13 — Inst al ling and connect i ng t he cross - c onnec t term in al 55 3-30 21-209 Stand ard 3.00 April 2000 3 Tight en the v elcro s traps whe n you have connected each cabl e to the chassi s. 4 Fo r syst ems requi red t o meet CISPR-B El ectr omagneti c Compa tibi lity (E MC), pe r form t he f ollowin g s tep.
Ch apt er 13 — Inst all i ng and connect in g t he cr oss- con nect t er mi na l Pag e 181 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Figur e 54 AUX cable connect or Te rminate the AUX cabl e at t he c r oss c onnect termi nal, acc ording to Ta ble 34.
Pag e 182 o f 332 Chapter 13 — Inst al ling and connect i ng t he cross - c onnec t term in al 55 3-30 21-209 Stand ard 3.00 April 2000 Ta b l e 3 4 A U X ca b le t er mi n atio n i nfor ma t io n 7 Fo r inst alla tions in Germany , c omplete t he form sho wn i n Figure 55 fo r ea ch car d slo t.
Ch apt er 13 — Inst all i ng and connect in g t he cr oss- con nect t er mi na l Pag e 183 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Figur e 55 Cross connec tions record — —.
Pag e 184 o f 332 Chapter 13 — Inst al ling and connect i ng t he cross - c onnec t term in al 55 3-30 21-209 Stand ard 3.00 April 2000.
Pag e 185 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 19 0 Chap ter 14 — In stall in g Pow er Failu re Tr an sf er U ni ts This ch apt er desc rib es how t o install a QUA6 Power Failur e T rans fer Uni t (PFT U).
Pag e 186 o f 332 Chapter 14 — Instal l ing Power Failur e Tran sfer Units 55 3-30 21-209 Stand ard 3.00 April 2000 Figur e 56 J1 cable l abels 4 Conn ect t he PF TU power and contr ol co nnections to the AUX co nnect or on t he Mai n Chassi s. See Figure 57 on page 187 and Ta ble 35 on page 188.
C h apter 14 — Inst alli ng Power Fa il ur e Trans fer Units Pag e 187 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Figur e 57 Auxil i ary connec tor AUX conne ct or.
Pag e 188 o f 332 Chapter 14 — Instal l ing Power Failur e Tran sfer Units 55 3-30 21-209 Stand ard 3.00 April 2000 Ta b l e 3 5 Contr ol a nd power connect ions on cabl e J1 5 Con nect the Attend a.
C h apter 14 — Inst alli ng Power Fa il ur e Trans fer Units Pag e 189 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Figur e 58 Power fail transf er PFT U co ntrol lead sign als To conn ect P FTUs from oth er m anufa cture rs, use the infor m ati on provi ded in Ta bl e 3 6.
Pag e 190 o f 332 Chapter 14 — Instal l ing Power Failur e Tran sfer Units 55 3-30 21-209 Stand ard 3.00 April 2000 Not e 1: R efer t o Figure 5 7 on p age 18 7 t o see where the Auxil iary c able conne c t s t o the Opt ion 11C Min i sy st em. Not e 2: If pow er is remo ved from the QUA6, a trans fer of the PFT U can occu r.
Pag e 191 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 20 8 Chapt er 15 — Inst all ing and conn ectin g SD I and Et hernet ports This cha pter con tains mod em se tup require ment s.
Pag e 192 o f 332 Chapter 15 — Instal l ing and connect ing SDI and Et hern et ports 55 3-30 21-209 Stand ard 3.00 April 2000 M ode m set up r equi remen ts Mod em s c onne cted to the Opti on 11C M.
Cha pte r 15 — I n stall i ng and conn ect i ng SDI and Ethernet ports Pag e 19 3 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Ins tal l ing and c onne ctin g SDI por ts You can use a swit ch se tting o n the circ uit card’s fa cepla te to c on trol the baud rate for port 0.
Pag e 194 o f 332 Chapter 15 — Instal l ing and connect ing SDI and Et hern et ports 55 3-30 21-209 Stand ard 3.00 April 2000 2 Con nect the NTBK48 3-por t SDI cab l e t o the 9- pin SDI connec tion (C OM RS-232) at the bac k of t h e Main Chass i s .
Cha pte r 15 — I n stall i ng and conn ect i ng SDI and Ethernet ports Pag e 19 5 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Figur e 60 An additi onal f er ri te f ilter att ached to the SDI cable 3 Conn ect the system t ermi nal to t h e cab le m arked “port 0” o n the NTBK48 3-por t cable.
Pag e 196 o f 332 Chapter 15 — Instal l ing and connect ing SDI and Et hern et ports 55 3-30 21-209 Stand ard 3.00 April 2000 N TAK02 SDI/DCH card Onl y the Ma in Cha ssis supp orts the NTAK02 SDI/DCH ca rd.
Cha pte r 15 — I n stall i ng and conn ect i ng SDI and Ethernet ports Pag e 19 7 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Ta b l e 3 9 NT AK02 pinou ts — P or t 0 at the cros .
Pag e 198 o f 332 Chapter 15 — Instal l ing and connect ing SDI and Et hern et ports 55 3-30 21-209 Stand ard 3.00 April 2000 12 T 12R BK-O O-BK RXDB TX DB TXDB RXDB I O O I - - - - - - - - 25 T 25R.
Cha pte r 15 — I n stall i ng and conn ect i ng SDI and Ethernet ports Pag e 19 9 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide N TAK03 TDS/DTR ca rd Th e N T D K9 7 MSC ca r d in c lud es the fu n ct ion al ity of th e NTAK03 TDS/DTR c a rd.
Pag e 200 o f 332 Chapter 15 — Instal l ing and connect ing SDI and Et hern et ports 55 3-30 21-209 Stand ard 3.00 April 2000 Not e: A modem elim ina t or i s suppl ied with th e s y stem.
Cha pte r 15 — I n stall i ng and conn ect i ng SDI and Ethernet ports Pag e 20 1 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Term inal set up Th e t er mi nal ca n be se tup any time , e xcep t d uring d at a t r an s miss io n. Do n ot se t up the termina l duri ng da ta tr ansmis sion to avoi d po tenti a l da ta l oss.
Pag e 202 o f 332 Chapter 15 — Instal l ing and connect ing SDI and Et hern et ports 55 3-30 21-209 Stand ard 3.00 April 2000 3 Chan ge the val ue i n eac h fie ld on each setup scre en as ne cessary. Use the keys l i s t ed in Table 45 to view and change set up value s .
Cha pte r 15 — I n stall i ng and conn ect i ng SDI and Ethernet ports Pag e 20 3 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Ta b l e 4 6 HP70 0/3 2 setup v al ues Global set -up scr een Host Port 1 Ke yboard U.
Pag e 204 o f 332 Chapter 15 — Instal l ing and connect ing SDI and Et hern et ports 55 3-30 21-209 Stand ard 3.00 April 2000 Ta b l e 4 7 V T 42 0 se t up va lu e s Global Set-Up On Line Comm 1 =RS.
Cha pte r 15 — I n stall i ng and conn ect i ng SDI and Ethernet ports Pag e 20 5 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Ta b l e 4 8 V T 22 0 se t up va lu e s Global Set-Up O.
Pag e 206 o f 332 Chapter 15 — Instal l ing and connect ing SDI and Et hern et ports 55 3-30 21-209 Stand ard 3.00 April 2000 Ins tal li ng and c on n e ctin g an et hern et ca ble Ethern et conn ection The Opt ion 11C Mini s ystem provi des a 10 Mbit E t h ernet co nnec tion to a Loca l Area Network (LAN).
Cha pte r 15 — I n stall i ng and conn ect i ng SDI and Ethernet ports Pag e 20 7 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Not e: W hen the tim e co mes t o confi gure the E the rnet lin k, use Over lay 117.
Pag e 208 o f 332 Chapter 15 — Instal l ing and connect ing SDI and Et hern et ports 55 3-30 21-209 Stand ard 3.00 April 2000.
Pag e 209 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 22 8 Chap ter 16 — St art ing the Option 1 1C Mini and i nstalling software This chapt er describe s how to start t he Option 11C Mini sys tem and to make sure that t he sy stem is opera tin g correc tly .
Pag e 210 o f 332 Chapt er 16 — St arting the Opt ion 11C Mini and i nsta lling sof tw a re 55 3-30 21-209 Stand ard 3.00 April 2000 Star t-up proce dures Pro cedure 2 7 Start- up procedu re for a new system ins t all at ion, using the MSC card 1 Te st t he power outl et .
Chap ter 1 6 — Starting t he O pti on 11C M ini and i nstalli ng sof tware Pag e 211 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 6 Perf or m an EDD using Overl ay 43. Afte r the syst em is loaded, a menu-dr i ven program call ed t h e “S oftwar e Ins tall ation Progr am” is automat ical l y c al led up.
Pag e 212 o f 332 Chapt er 16 — St arting the Opt ion 11C Mini and i nsta lling sof tw a re 55 3-30 21-209 Stand ard 3.00 April 2000 The flas h RO M s tore s inform at ion ab out the se lect ions. T he informati on is a l is t of ins t ruc t ion s th at the progr am fo llo ws when it runs .
Chap ter 1 6 — Starting t he O pti on 11C M ini and i nstalli ng sof tware Pag e 213 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide • Confirm Upgrade I n f or mation: T his opti on allows you to revie w the se lecte d ins tall ation optio ns.
Pag e 214 o f 332 Chapt er 16 — St arting the Opt ion 11C Mini and i nsta lling sof tw a re 55 3-30 21-209 Stand ard 3.00 April 2000 Featu re set and IS M para meter s The S oft ware I nstal lati on Progr a m al lows the se lect ion of a feat ure se t to be i nstalle d and enab le d on the Opti on 11C Mini s yst em.
Chap ter 1 6 — Starting t he O pti on 11C M ini and i nstalli ng sof tware Pag e 215 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Not e: Off-site program mi ng of dat aba s es i s subj ec t to a ll sec uri ty keyc ode rest ric t i ons .
Pag e 216 o f 332 Chapt er 16 — St arting the Opt ion 11C Mini and i nsta lling sof tw a re 55 3-30 21-209 Stand ard 3.00 April 2000 Pro cedure 2 9 Inst al li ng soft ware 1 Make sure the MSC c ard i s in CPU slot (slot 0) of t he Main Chas sis. Fo r fi rst- time in sta l la t io ns, s oft war e is i nst all ed f rom the MSC car d.
Chap ter 1 6 — Starting t he O pti on 11C M ini and i nstalli ng sof tware Pag e 217 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Figur e 64 PCMCI A card slot loc at ion 4 Obse rve the term i nal sc reen .
Pag e 218 o f 332 Chapt er 16 — St arting the Opt ion 11C Mini and i nsta lling sof tw a re 55 3-30 21-209 Stand ard 3.00 April 2000 5 Set the syst em Time and Date . Note: The Time and Date pro mp t appe ars when the In stall Setup Progr am detec ts a system Year Date that i s not i n the r ange of 19 95-2095.
Chap ter 1 6 — Starting t he O pti on 11C M ini and i nstalli ng sof tware Pag e 219 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 7 Selec t the Featu r e Set to be enabl ed. Note: The Featur e Set select ed must match th e o ne pr ov ided wit h ke ycod es.
Pag e 220 o f 332 Chapt er 16 — St arting the Opt ion 11C Mini and i nsta lling sof tw a re 55 3-30 21-209 Stand ard 3.00 April 2000 10 Con fi rm Feat ure Set and pack ages.
Chap ter 1 6 — Starting t he O pti on 11C M ini and i nstalli ng sof tware Pag e 221 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 12 Selec t a Datab ase usi ng the PCMCIA card . If you are insta l li ng from the MSC card, g o to Ste p 11 on page 220.
Pag e 222 o f 332 Chapt er 16 — St arting the Opt ion 11C Mini and i nsta lling sof tw a re 55 3-30 21-209 Stand ard 3.00 April 2000 14 R ev ie w ISM paramet ers. Note: On a new inst allat ion, the ISM par amete rs di splay ed on t he ter m inal scr een are the def ault sett ings rel at ed t o the Feat ur e Set se le ct ion.
Chap ter 1 6 — Starting t he O pti on 11C M ini and i nstalli ng sof tware Pag e 223 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 15 Selec t ISM par am ete r s.
Pag e 224 o f 332 Chapt er 16 — St arting the Opt ion 11C Mini and i nsta lling sof tw a re 55 3-30 21-209 Stand ard 3.00 April 2000 16 C on firm ISM par amete rs.
Chap ter 1 6 — Starting t he O pti on 11C M ini and i nstalli ng sof tware Pag e 225 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 17 Defi ne the AUX ID. Note: The defaul t AUX ID is the system ID pr ovided wi th the Opti on 11 C Mini .
Pag e 226 o f 332 Chapt er 16 — St arting the Opt ion 11C Mini and i nsta lling sof tw a re 55 3-30 21-209 Stand ard 3.00 April 2000 19 Rev iew and confir m i nformat ion e nt ered.
Chap ter 1 6 — Starting t he O pti on 11C M ini and i nstalli ng sof tware Pag e 227 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 20 Enter the keycodes f rom the Ke ycode Dat a Sheet .
Pag e 228 o f 332 Chapt er 16 — St arting the Opt ion 11C Mini and i nsta lling sof tw a re 55 3-30 21-209 Stand ard 3.00 April 2000.
Pag e 229 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 25 2 Chapter 17 — C onnecting th e telephones This cha pt er con ta i ns ins tr uctions for co nne cti ng telephone s to the cr os s -con nec t te rminal.
Pag e 230 o f 332 Chapt er 17 — Con nectin g the tele phones 55 3-30 21-209 Stand ard 3.00 April 2000 Refe r to the ins tructi ons pr ovi de d wit h the telepho ne or Att enda nt Cons ole and to the.
Cha pte r 17 — Connecting t he telepho nes Page 23 1 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 4 Conn ect the ot he r en d of t he cro ss-connect wi re t o t he as signed TN termina l block.
Pag e 232 o f 332 Chapt er 17 — Con nectin g the tele phones 55 3-30 21-209 Stand ard 3.00 April 2000 Figur e 66 Mer idi an Dig i tal Tel ephon e cross conn ect ions Unit 0 Unit 1 Unit 14 Unit 15 T0.
Cha pte r 17 — Connecting t he telepho nes Page 23 3 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Figur e 67 48 -por t Digital Li ne Card cross connect ions Not e: F igure 67 i s a n exa mple which shows t he cr oss connecti ons for t he Ca rd 4/Card 6 c onn ector.
Pag e 234 o f 332 Chapt er 17 — Con nectin g the tele phones 55 3-30 21-209 Stand ard 3.00 April 2000 Co nnect ing te leph ones wi thou t a PF TU Pro cedure 3 1 Conn ecti ng te l eph ones wit hout a PFTU 1 Loc ate the te lephone te rminati ons on the cross - conn ect termi nal.
Cha pte r 17 — Connecting t he telepho nes Page 23 5 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 7 Conn ect the ot he r en d of t he cro ss-connect wi re t o t he as signed TN termina l block. Ta ble 52 on page 2 42 prov ides the def aul t DN assign ments .
Pag e 236 o f 332 Chapt er 17 — Con nectin g the tele phones 55 3-30 21-209 Stand ard 3.00 April 2000 Pro cedure 3 3 Conn ecti n g an off-premis e telephone 1 Inst all the NTAK92AA Off-Prem ise Protecti on M odule on the wall us ing fo ur #10 1/2 in (mi nimum) scr ews.
Cha pte r 17 — Connecting t he telepho nes Page 23 7 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 3 With cros s- co nnect wire, connect the line car d and other co nnections to t he conso le as shown in Figur e 69 on page 23 8.
Pag e 238 o f 332 Chapt er 17 — Con nectin g the tele phones 55 3-30 21-209 Stand ard 3.00 April 2000 Figur e 69 Atten dant Conso le conne ct ions Cross-connect block W-BL BL-W W-O O-W Y-BL BL-Y V-S.
Cha pte r 17 — Connecting t he telepho nes Page 23 9 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Ta b l e 4 9 T erminal Number assignment s — M ain Chas si s and Chassis Expa nder Ph ysi cal slot L ogical sl ot Fi r s t TN. .. Last TN Cable Ch assis 11 01 00.
Pag e 240 o f 332 Chapt er 17 — Con nectin g the tele phones 55 3-30 21-209 Stand ard 3.00 April 2000 PFT 2 9T 9R R-BR BR-R Connect to the telep hone 10T 10R R-S S-R Connec t to the tel ep hone line.
Cha pte r 17 — Connecting t he telepho nes Page 24 1 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Ta b l e 5 1 Color combi nations of cabl e pai rs Color W- B l Bl-W W-O O-W W- G G-W.
Pag e 242 o f 332 Chapt er 17 — Con nectin g the tele phones 55 3-30 21-209 Stand ard 3.00 April 2000 Tabl e 52 li sts t he de fault DN ass ignments f or the Main Chas sis a nd Chassi s Expa nder.
Cha pte r 17 — Connecting t he telepho nes Page 24 3 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Tabl e 53 lists the de fau lt DN ass ignm en ts f or the Main Chas sis and Cha ssis Expa nder fo r Germany.
Pag e 244 o f 332 Chapt er 17 — Con nectin g the tele phones 55 3-30 21-209 Stand ard 3.00 April 2000 Cro ss- co nne cti ng te rmina l Digi t al Subsc r i ber L oops Refer t o ISDN BRI Admin istrat .
Cha pte r 17 — Connecting t he telepho nes Page 24 5 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Ta b l e 5 4 T el e phone ton es Ta b l e 5 5 Te lephone t ones f or Germany Not e 1: Befor e you acti vate a tele phone, make su re tha t you have deci ded on its f inal location .
Pag e 246 o f 332 Chapt er 17 — Con nectin g the tele phones 55 3-30 21-209 Stand ard 3.00 April 2000 Act ivat ing a d efault m odel wi th a cha racter display Pro cedure 3 5 Activ ating a de f ault model tel ephone wi t h a charact er di spla y 1 Plug the t elephone set into the jac k and wait 20 sec onds bef or e yo u li ft the han dset.
Cha pte r 17 — Connecting t he telepho nes Page 24 7 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 3 Pr ess the pound k ey again t o select the de fault ex t ension number . You hear t he r elocati on ton e. The charac ter d ispla y shows “ O K”.
Pag e 248 o f 332 Chapt er 17 — Con nectin g the tele phones 55 3-30 21-209 Stand ard 3.00 April 2000 Act ivat ing a d efault mod el witho ut a ch aracte r displ ay Pro cedure 3 6 Activ ating a de f.
Cha pte r 17 — Connecting t he telepho nes Page 24 9 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Act ivat ing a cu stomize d mod el wit h a cha r acter display Pro cedure 3 7 Activ ating a customi z ed t elephone 1 Plug the t elephone set into the jac k and wait 20 sec onds bef or e yo u lif t t he h andset .
Pag e 250 o f 332 Chapt er 17 — Con nectin g the tele phones 55 3-30 21-209 Stand ard 3.00 April 2000 Not e: If other k eys req uire s econ dary e xtension numbe rs, you ar e pr ompted un til y ou ent er al l of the r e quired exte nsion nu m bers for t he mode l.
Cha pte r 17 — Connecting t he telepho nes Page 25 1 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 3 Enter the cust omized ext ension num ber and press the pound ke y. You hear a shor t high- pitch ed b eep which las ts four second s, f ollowed by sil ence ( r eloc ation tone).
Pag e 252 o f 332 Chapt er 17 — Con nectin g the tele phones 55 3-30 21-209 Stand ard 3.00 April 2000.
Pag e 253 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 27 8 Chapt er 18 — Con nect ing t he t runks This chapt er descr ibes how to c onnect t r unk s dire c tl y to the tr unk ca rd, wi th or without the use of a Power Fa il ure T ransfer Unit (PFTU).
Pag e 254 o f 332 Chapt er 18 — Con nectin g the trunk s 55 3-30 21-209 Stand ard 3.00 April 2000 Con n ec tin g tr un ks wi thou t a P F TU Pro cedure 3 9 Conn ecti ng tr unks without a PFTU 1 Fr o.
Chap ter 1 8 — C onnect ing t he tru nks Page 25 5 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Ta b l e 5 6 P ower Fa ilure T r ansfer Unit connecti ons QU A6 J1 cab le Functi on Pa.
Pag e 256 o f 332 Chapt er 18 — Con nectin g the trunk s 55 3-30 21-209 Stand ard 3.00 April 2000 T run k c onn ect i o ns NT 8D14 Un iversal t r unk card The Un iver sal tr unk ca rd provide s eigh t a n alog tru nks that c an funct ion in the mode s shown in Tabl e 57.
Chap ter 1 8 — C onnect ing t he tru nks Page 25 7 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Ta b l e 5 8 NT8D1 4 Univer s al t runk conne ctions Cab le f rom chassi s RAN mode P .
Pag e 258 o f 332 Chapt er 18 — Con nectin g the trunk s 55 3-30 21-209 Stand ard 3.00 April 2000 NT 8D15 E &M T runk card Ta b l e 5 9 NT8D1 5 E&M T run k c ard Ca bles C a rd 1 thr ough Ca.
Chap ter 1 8 — C onnect ing t he tru nks Page 25 9 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide NT 6D70 S ILC and NT6D 71 U ILC c ar ds Refer t o ISDN BRI Admin istrat ion and M aint e na nce Gui de (55 3-3011 -311) fo r a c omple te de scri ption of trun k DSL i nsta llati on and c onnect ions.
Pag e 260 o f 332 Chapt er 18 — Con nectin g the trunk s 55 3-30 21-209 Stand ard 3.00 April 2000 Ta b l e 6 1 E&M 2-wire T ype 2 Le ad desi gnat ions Pi n s Pair c olo r Unit number T0 R0 27 2 .
Chap ter 1 8 — C onnect ing t he tru nks Page 26 1 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide E& M TI E tr unk card ( 4-Wir e) Ta b l e 6 2 E&M TIE trunk car d (4-wi re) Ca.
Pag e 262 o f 332 Chapt er 18 — Con nectin g the trunk s 55 3-30 21-209 Stand ard 3.00 April 2000 Ta b l e 6 3 E&M TIE trunk car d (4-wi re) Cab les Car d 1 thr ough Card 10 fr om chassi s Colum.
Chap ter 1 8 — C onnect ing t he tru nks Page 26 3 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide E& M TI E tr unk card ( 2280Hz ) 13 T 13 R BK-G G-BK Unit 3 38 13 RA RB RA RB 14 T.
Pag e 264 o f 332 Chapt er 18 — Con nectin g the trunk s 55 3-30 21-209 Stand ard 3.00 April 2000 E& M T IE tr unk car d ( RAN) E& M T IE tr unk car d ( MUS ) Ta b l e 6 5 E&M 2-wire Rec.
Chap ter 1 8 — C onnect ing t he tru nks Page 26 5 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide CO & DID trunk card Ta b l e 6 7 Centra l Office & Direct Inwar d Dia l trunk .
Pag e 266 o f 332 Chapt er 18 — Con nectin g the trunk s 55 3-30 21-209 Stand ard 3.00 April 2000 Cen tral Of fice trun k card Ta b l e 6 8 Centra l Off ice t runk co nnections Cab le f rom chassi s.
Chap ter 1 8 — C onnect ing t he tru nks Page 26 7 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide T run k c onn ect i o ns (U K) NT 5K17 Dir ect Inwa rd Dial ca r d ter minat ions Cr o.
Pag e 268 o f 332 Chapt er 18 — Con nectin g the trunk s 55 3-30 21-209 Stand ard 3.00 April 2000 NT 5K18 Exch ange li ne t runk c ard te rmina tions Cr oss conne ct th e NT5K18 Exchang e lin e trun k car d as s hown in T able 70. Not e: T he conne ct ions on the NT5K18 Exch ang e lin e trun k car d are po larity sensi tive .
Chap ter 1 8 — C onnect ing t he tru nks Page 26 9 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide T3 R3 32 7 R-O O-R Un i t 3 33 8 R-G G-R T4 R4 34 9 R-BR BR-R Un i t 4 35 10 R-S S-R T.
Pag e 270 o f 332 Chapt er 18 — Con nectin g the trunk s 55 3-30 21-209 Stand ard 3.00 April 2000 NT 5K19 An alo g TIE li n e tru nk car d term inations Cr oss conne ct the NT 5K19 ana log TIE li ne t r unk c a rd as s hown in Ta ble 71 . Not e: T he sp eech pairs on th e NT 5 K19 card are polari ty insens itive .
Chap ter 1 8 — C onnect ing t he tru nks Page 27 1 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Ta b l e 7 2 NT5K1 9 2W Type 1 mode terminat i on s Pair Pi ns Pa ir color Un it nu mb.
Pag e 272 o f 332 Chapt er 18 — Con nectin g the trunk s 55 3-30 21-209 Stand ard 3.00 April 2000 Ta b l e 7 3 NT5K1 9 4W T ype 1 mode ter minati ons Pair Pi ns Pa ir co lor Un it nu m be r TA TB 26.
Chap ter 1 8 — C onnect ing t he tru nks Page 27 3 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Ta b l e 7 4 NT5K1 9 AC15 mode pair te rmina tions Pair Pi ns Pa ir color Un it nu m b.
Pag e 274 o f 332 Chapt er 18 — Con nectin g the trunk s 55 3-30 21-209 Stand ard 3.00 April 2000 Ac tiv ati ng a defa ult mo del tr u nk Due to th e au tomat ic 3 0 seco nd time -out on t he admini strat ion me nu, pr epar e t he da ta t ha t yo u want to input before y ou begi n.
Chap ter 1 8 — C onnect ing t he tru nks Page 27 5 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Pro cedure 4 1 Activ ating a defaul t model trunk 1 Lift the handset of the adm ini strat ion tel ephone. 2 Ent er the administ ration Flexi ble Featur e C o de to acces s the ad mini st rati on menu.
Pag e 276 o f 332 Chapt er 18 — Con nectin g the trunk s 55 3-30 21-209 Stand ard 3.00 April 2000 8 Te rmina t e the sequence by hanging up the tele phone re cei v er.
Chap ter 1 8 — C onnect ing t he tru nks Page 27 7 of 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 6 Enter the TN in Opt ion 1 1 format (CCUU). Th e respo nse “MO DE L?” prom pt s you t o selec t a model numb er f or the tru nk. 7 Enter a trunk model number for t he speci f ied TN, and ro ute and press the po und key (#).
Pag e 278 o f 332 Chapt er 18 — Con nectin g the trunk s 55 3-30 21-209 Stand ard 3.00 April 2000.
Pag e 279 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 28 4 Chap ter 19 — Con nect ing an e xtern a l ala rm This chap ter desc rib es the pro ce dures f or conne cting a n exte rnal a larm t o the Opt ion 11C Mini sys te m .
Pag e 280 o f 332 Chapt er 19 — Con nectin g a n exte r nal alarm 55 3-30 21-209 Stand ard 3.00 April 2000 3 Use LD 15 and m ake t he f ol lowin g changes. Note: The foll owi ng l ist only cont ains the prompt s r equi rin g a respo nse. Use a Carria ge Ret ur n , <CR>, to acc ept the def ault valu es for the other pr ompts .
Chapter 19 — Co nnecting an ext ernal alarm Page 28 1 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Figur e 70 Contact s i n PFTU 8T (R-G) 8 R (G-R ) 6T (R-BL) 6R ( BL-R) 7T (R-O) 7R.
Pag e 282 o f 332 Chapt er 19 — Con nectin g a n exte r nal alarm 55 3-30 21-209 Stand ard 3.00 April 2000 Ta b l e 7 7 P ower Fa ilure T r ansfer Unit connecti ons Unit Pa i r Color Normal mode Fai.
Chapter 19 — Co nnecting an ext ernal alarm Page 28 3 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide P F T 5 21T 21R V- B L BL -V M a k e s wi th 2 2 T a nd 22R Opens 22T a nd 22R Mak.
Pag e 284 o f 332 Chapt er 19 — Con nectin g a n exte r nal alarm 55 3-30 21-209 Stand ard 3.00 April 2000.
Pag e 285 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 31 4 Appendix A – Pr eprog rammed data When you firs t ins tall an Opti on 11C Mini sys tem, you mu st enter cus tomer data into the ove rla y programs. You must, for exa mple, ass ign feature s to t el ephone ke ys for the te le phones to work correc tly.
Pag e 286 o f 332 Appendix A – Preprogr ammed dat a 55 3-30 21-209 Stand ard 3.00 April 2000 Pass wo r ds an d co de s Tabl e 78 lists each func tion i n the left col umn with its pa s sword or code on th e r i gh t .
App endi x A – Pr epr ogrammed data Page 28 7 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Fir st di g its Tabl e 79 shows t he de fa ult numbering plan for Opt ion 11C Mi ni: Ta b l e 7 9 Defaul t nu mbe ri ng plan— Fi r st di git Not e: T he fi rs t num ber of the de fa ult n um b ering pl an is preprogr a mmed as 220 0.
Pag e 288 o f 332 Appendix A – Preprogr ammed dat a 55 3-30 21-209 Stand ard 3.00 April 2000 Impo r tant ext ensi on nu m b ers Ta b l e 8 0 Defaul t nu mbe ri ng plan— i m portant ext ension n um.
App endi x A – Pr epr ogrammed data Page 28 9 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Exte nsions assig ned t o card slot s Ta b l e 8 1 Extensi ons assigne d to car d slots i .
Pag e 290 o f 332 Appendix A – Preprogr ammed dat a 55 3-30 21-209 Stand ard 3.00 April 2000 F lex ibl e Feat ur e C od es Many admin istrati ve proced ure s use Fle xible Featur e Code (FFC) data . Tabl e 82 li sts t he FFCs f or the Opt ion 11C Mini sys tem.
App endi x A – Pr epr ogrammed data Page 29 1 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide SDI po rt s The mi nimum sy stem por t confi gura tio n for Optio n 11 C Min i is 3 SDI port s , all of which are on the NTDK97 MSC card. You can get add iti onal por ts by inst alli ng an NTAK02 SDI/ DCH c ircui t card.
Pag e 292 o f 332 Appendix A – Preprogr ammed dat a 55 3-30 21-209 Stand ard 3.00 April 2000 Enha nced Ser ial Da ta Interfac e (ES DI) po rt Port 9 is p r epr ogrammed as an ESDI port and suppo rts Meridia n Mail Mini .
App endi x A – Pr epr ogrammed data Page 29 3 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide T run k ro ut es T abl e 85 shows preprogra m med trunk rout e in formation t hat yo u must ha ve on hand to ac ti vate and modi fy tru nks.
Pag e 294 o f 332 Appendix A – Preprogr ammed dat a 55 3-30 21-209 Stand ard 3.00 April 2000 T run k mode l s Not e: All trunk s are programm ed as im mediat e st art/supe rvi sion = Ye s, wi th the except ion of tr unks w i th a n aste risk (*) nex t to them.
App endi x A – Pr epr ogrammed data Page 29 5 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 19 EM4 DIP - DID XUT 1 LDR (W ink Star t Supv = Y es DIP 3COM/ 600 2L D R (W ink Star t Su.
Pag e 296 o f 332 Appendix A – Preprogr ammed dat a 55 3-30 21-209 Stand ard 3.00 April 2000 7 GRD DTN 3 C OM/900 8 LOP DTN 3COM/900 MUS XUT 1 3COM/600 A WR XUT 1 600/120 0 RAN XUT 1 600/120 0 P A G.
App endi x A – Pr epr ogrammed data Page 29 7 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide * These trunks are se t for Wink star t. M ode l te lep hones This secti on provides a se .
Pag e 298 o f 332 Appendix A – Preprogr ammed dat a 55 3-30 21-209 Stand ard 3.00 April 2000 Not e: Off-premises S tat ion (OP S) t elep hones do not have t he ir o wn t elepho ne models . You can, howe ve r, creat e OPS models by e nterin g D D i n r esponse to t he CDEN promp t in LD 10.
App endi x A – Pr epr ogrammed data Page 29 9 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Ta b l e 8 9 Class of Serv ice opt ions - ACD telephon es Prom pt Meaning UNR Un restricte.
Pag e 300 o f 332 Appendix A – Preprogr ammed dat a 55 3-30 21-209 Stand ard 3.00 April 2000 Ad mini stra ti on tele ph one mode ls M2008 m od el 99 Inten ded use : Administra ti on (main te n anc e.
App endi x A – Pr epr ogrammed data Page 30 1 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide M2616 m od el 99 Inten ded use : Administra ti on (main te n anc e) tele phon e Ass igne d.
Pag e 302 o f 332 Appendix A – Preprogr ammed dat a 55 3-30 21-209 Stand ard 3.00 April 2000 Centr al Answer ing Posit ion (CAP) te lephone mod els M2616 and M2216 CAP tel ep ho ne model 60 Inten de.
App endi x A – Pr epr ogrammed data Page 30 3 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide An alog (5 00/2500-t ype) te lephon e mod els Not e: W hen you are ac tiv ating an anal og (500- type) tel ephone , you must us e an anal og (2500 -type ) telephone t o defi ne the featu re s.
Pag e 304 o f 332 Appendix A – Preprogr ammed dat a 55 3-30 21-209 Stand ard 3.00 April 2000 M2006 Gen eral b usine ss telep ho ne m odels Ta b l e 9 4 M200 6 Gen eral b us iness t elephone models M.
App endi x A – Pr epr ogrammed data Page 30 5 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide M2008 Gen eral b usine ss telep ho ne m odels Ta b l e 9 5 M200 8 Gen eral b us iness t el.
Pag e 306 o f 332 Appendix A – Preprogr ammed dat a 55 3-30 21-209 Stand ard 3.00 April 2000 M2008 Tw o-line general business tel eph one model s Ta b l e 9 6 M200 8 T wo-l ine gener al busi ness te.
App endi x A – Pr epr ogrammed data Page 30 7 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 28 T wo- line gener al b us iness te lep hone F N D , G PUA , LNA, MW A, NDD , FBD 7 - A u.
Pag e 308 o f 332 Appendix A – Preprogr ammed dat a 55 3-30 21-209 Stand ard 3.00 April 2000 M2008 m anag er tele phone mo dels Ta b l e 9 7 M200 8 Mana ger telep hone models Model I nte nded use As.
App endi x A – Pr epr ogrammed data Page 30 9 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide M2008 Me ssage center telepho ne mod el s Ta b l e 9 8 M200 8 Mes sage center te lephone m.
Pag e 310 o f 332 Appendix A – Preprogr ammed dat a 55 3-30 21-209 Stand ard 3.00 April 2000 M2216 ACD telephone mod els Ta b l e 9 9 M221 6 A CD tel ephone models Model I nte nded use Ass igne d Cl.
App endi x A – Pr epr ogrammed data Page 31 1 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide M2616 Se cretary tel ephon e model s Ta b l e 1 0 0 M261 6 Se cretary t e lephone m odels .
Pag e 312 o f 332 Appendix A – Preprogr ammed dat a 55 3-30 21-209 Stand ard 3.00 April 2000 M2616 Advan ced b usines s telep hone Ta b l e 1 0 1 M261 6 A CD tel ephone models Model I nte nded use A.
App endi x A – Pr epr ogrammed data Page 31 3 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide M2616 Ma nag er telepho ne mod els Ta b l e 1 0 2 M261 6 Mana ger telep hone models Model .
Pag e 314 o f 332 Appendix A – Preprogr ammed dat a 55 3-30 21-209 Stand ard 3.00 April 2000 M2616 Me ssage center telepho ne mod el s Ta b l e 1 0 3 M261 6 Mes sage center te lephone mo dels Model .
Pag e 315 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 33 2 Appendix B – Changing prepr ogrammed data Ge nera l info r mati on The pre prog rammed data on the O p tio n 11C Mini syste m c an pro vide a sta r t ing point for prog ramming the syst e m’ s tel e p hone and trun king inform ation.
Pag e 316 o f 332 Appendix B – Changing pr eprogrammed data 55 3-30 21-209 Stand ard 3.00 April 2000 Ch angi ng th e defa ult n umberi ng pl an Exte nsions assign ed are differ ent f r o m the defau lt numb ering pla n Co mpa r e the fir st d igi ts as signe d to this sys te m with the default number in g pl an.
Append ix B – Changing pr eprogrammed data Page 31 7 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide 6 Select “4 INSTALLATION OPTIONS” by ent ering the number “4”. Th e chara ct er display reads: 1 DEFAULT SETS 2 NUMBERING PLAN 7 Select “2 NUMBERING PLAN” by enteri ng th e number “2”.
Pag e 318 o f 332 Appendix B – Changing pr eprogrammed data 55 3-30 21-209 Stand ard 3.00 April 2000 Exampl e: In th is exa m ple, the new n umberi ng pla n start s at ext ens i on number 4500.
Append ix B – Changing pr eprogrammed data Page 31 9 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Shif ti ng th e num be ri ng p lan t o a n ew card sl ot The f irst numb er i n the numbe ring p la n is assig ned to s lo t 1, unit 0.
Pag e 320 o f 332 Appendix B – Changing pr eprogrammed data 55 3-30 21-209 Stand ard 3.00 April 2000 Exampl e: The fi rs t number in the number ing plan is 2200. Fo r the fi rst number in th e nu m berin g plan to b e 2300, and the first line car d is i n slot 6, pe rform t he fo llo w ing ca lcula t i on: 1 Locate the first li ne c ard.
Append ix B – Changing pr eprogrammed data Page 32 1 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Obta ining the use o f card slot 10 If anoth e r circu it card re quires card slot 10, remo ve the si x Meri dian Mail Mi ni ag ents programm ed for this c ard s lot.
Pag e 322 o f 332 Appendix B – Changing pr eprogrammed data 55 3-30 21-209 Stand ard 3.00 April 2000 Co nfl icts with C all Par k ext ension numbers Ext en s i o n num b er s for sy s te m ca ll pa rk ar e p rep r o gr a mm ed f o r th e Ce n tr a l Answe ring Pos it i on .
Append ix B – Changing pr eprogrammed data Page 32 3 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Co nfl icts with th e attend an t exten sion nu mber You canno t remove the a ttenda nt e x te nsion number com ple tely from the Opt ion 11C Mini s ys tem data, but you c a n repla ce it with anoth er number.
Pag e 324 o f 332 Appendix B – Changing pr eprogrammed data 55 3-30 21-209 Stand ard 3.00 April 2000 Co nfl icts with Flex ible Fea ture Co des If the preprogra mmed Fl e xible Fe ature Codes (FF C) c onflic t with t he pr ogramming requi re d for th e Option 11C Mini syst e m, remove the data from the syst em u sin g LD 57.
Append ix B – Changing pr eprogrammed data Page 32 5 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide To remove al l ac ces s cod e s , ente r the followin g co mmands: REQ OU T Action .
Pag e 326 o f 332 Appendix B – Changing pr eprogrammed data 55 3-30 21-209 Stand ard 3.00 April 2000 Cre ati ng anal og te leph one mod els You must ent er th e foll owin g inform a tio n in LD 10 t.
Append ix B – Changing pr eprogrammed data Page 32 7 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Creat in g dig ital m ode l t eleph one s To cre ate model digi ta l tele phones, you mus t pro gra m key 0 with a funct ion t hat can act as a prime ext ens i on number or its equiv a lent .
Pag e 328 o f 332 Appendix B – Changing pr eprogrammed data 55 3-30 21-209 Stand ard 3.00 April 2000 Pri nt i ng mo de l in fo r ma ti on To print infor m atio n about mode l te lephon es , us e L D 20. An alog te lephon es LD 20 REQ PR T TYP E 500 M MODL YYY “YYY” = the tele phone mode l num ber.
Append ix B – Changing pr eprogrammed data Page 32 9 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Cr eat in g mo d el t run ks an d ch an gi ng rou te ac ce ss co de s If you need a trunk th at is dif ferent fro m the d efault mode ls provi ded in Opt ion 11C Mini softwa re, use Overlay 14 to d e sign a m odel.
Pag e 330 o f 332 Appendix B – Changing pr eprogrammed data 55 3-30 21-209 Stand ard 3.00 April 2000 Mo dif y i n g mo de l tr un k s If you wa nt to m o dify a t runk, l oad LD 14 and ent er the fo.
Append ix B – Changing pr eprogrammed data Page 33 1 o f 332 Opt ion 11 C Mini Plannin g a nd Ins tall ation Guide Cha n gin g a r o ut e a cc ess c ode Us e this pro c ed u r e to ch an ge a ro u t e acc es s c o de . Pro cedure 4 7 Chan ging a rout e acces s code 1 Lift the handset of the adm ini strat ion tel ephone.
Pag e 332 o f 332 Appendix B – Changing pr eprogrammed data 55 3-30 21-209 Stand ard 3.00 April 2000 6 Enter the new ac cess code and press t he pou nd key. Th e disp l ay s hows “CODE CHANGED”. Afte r a delay of approxim ately four secon ds, you hear spec ial dial tone an d the seq uence repeats when th e prompt “ROUTE ACCESS?” ap pears.
.
F amily Product Ma nual Conta cts Cop yright FCC notice T rademarks Document number P roduct release D ocument release Date Publi sh Mer idian 1 Option 11C Mini Plan ning and I ns talla tion Guid e Cop yright © 1999–2000 Nor tel Networks All Rights Reser v ed Inf or mation is subject to change without notice.
An important point after buying a device Nortel Nortel Meridian 1 Option 11C Mini (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nortel Nortel Meridian 1 Option 11C Mini yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nortel Nortel Meridian 1 Option 11C Mini - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nortel Nortel Meridian 1 Option 11C Mini you will learn all the available features of the product, as well as information on its operation. The information that you get Nortel Nortel Meridian 1 Option 11C Mini will certainly help you make a decision on the purchase.
If you already are a holder of Nortel Nortel Meridian 1 Option 11C Mini, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nortel Nortel Meridian 1 Option 11C Mini.
However, one of the most important roles played by the user manual is to help in solving problems with Nortel Nortel Meridian 1 Option 11C Mini. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nortel Nortel Meridian 1 Option 11C Mini along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
