Instruction/ maintenance manual of the product Industrial Handset Nortel Networks
Go to page of 31
DECT Industrial Ha ndset User Guide Issue 02 Galwa y M1 Design Support 1 DE CT Industrial Handset User Guide.
DECT Industrial Ha ndset User Guide Issue 02 Galwa y M1 Design Support 2 Table of Contents TABLE OF CONTEN TS ....... ... .. .... ... .... .. ..... .. ..... .. ..... .. .. ..... .. ..... .. .... ... .... ... .... .. ... ... 2 1 HAN DSET IN FORMATI ON .
DECT Industrial Ha ndset User Guide Issue 02 Galwa y M1 Design Support 3 6.4 P ER SONAL P HONE B OOK ... .. ..... .. ..... .. ..... .. .... ... ....... .... .. ..... .. ..... .. .... ... .... ... . 20 6.4.1 Add Personal Phone Book Entry. ... . . .. ..
DECT Industrial Ha ndset User Guide Issue 02 Galwa y M1 Design Support 4 1 HANDSET INFORMA TION This product is classified with IP 52 classifi cation as defined in EN60529.
DECT Industrial Ha ndset User Guide Issue 02 Galwa y M1 Design Support 5 2 GENERAL 2.1 Handset The handset has 22 keys which are des cribed as follows: Voice (short press) & E2 (long press) Message function. In Menu - Cursor left After a digit - d elete last digit.
DECT Industrial Ha ndset User Guide Issue 02 Galwa y M1 Design Support 6 2.2 Display Three li nes, of 12 alphanumeric characters in length, can show text or ca ller information.
DECT Industrial Ha ndset User Guide Issue 02 Galwa y M1 Design Support 7 3 INST AL LA TION 3.1 Installing the Charger Connect the power line cable to the back of the ch arger and then plug the AC adapter into the mains socket outlet.
DECT Industrial Ha ndset User Guide Issue 02 Galwa y M1 Design Support 8 Installation of the Chargers on the Charging Rack The charg ers can b e placed in two different positions, depending on the usag e of the chargers. If the chargers are placed on th e desk top the chargers should b e connected with 2 screws.
DECT Industrial Ha ndset User Guide Issue 02 Galwa y M1 Design Support 9 3.7. Operating Tim es Standby time - up to 90 hours. Talk time – up to 10 hours. 3.8. Battery C harging In formation The b att e ry ca pa ci t y can be c he c ked u s in g the men u op ti on.
DECT Industrial Ha ndset User Guide Issue 02 Galwa y M1 Design Support 10 Not e: When the handset is plac ed in the charg er, the vibrator and B-answer ( auto answer functions are dis abled. 3.10 Low Battery Warning If the battery capacity reaches a certain minimum value: On-Hook • The dis pla y f la s he s batt e ry l ow.
DECT Industrial Ha ndset User Guide Issue 02 Galwa y M1 Design Support 11 4 INITIAL S ETUP 4.1 Initial Setup an d Operation The handset can b e operated on a maximum of 10 DECT systems. Be fore you can make a call via a DECT s ystem, the handset has to be subscribed to th e M eridian 1.
DECT Industrial Ha ndset User Guide Issue 02 Galwa y M1 Design Support 12 The default hand set n ame ‘PHIL IPS’ is displayed on handsets that ar e not subscribed. When the handset can not be subscribed to the system, the display will show ‘subscription failed’.
DECT Industrial Ha ndset User Guide Issue 02 Galwa y M1 Design Support 13 4.4 Selecting a DECT System (Roaming) Roaming between M eridian 1 systems is only pos sible when th e handset is subscrib ed to each system . Manual To switch between DECT systems ma nuall y: 1.
DECT Industrial Ha ndset User Guide Issue 02 Galwa y M1 Design Support 14 5 USING T HE HANDSET A complete menu tr ee is located at the end of this document for referen ce. 5.1 Operating in Standby Mode The menu feature oper ates as follows: 1. Pre ss the key to enter the menu display.
DECT Industrial Ha ndset User Guide Issue 02 Galwa y M1 Design Support 15 The keypad lock can be activated by pressing the key immediately foll owed by the * key. The same operation is required to de activate the key pad lock. ‘KEY LOC KE D’ is di sp la ye d wh e n t he ke ypa d l o ck is a cti va t e d.
DECT Industrial Ha ndset User Guide Issue 02 Galwa y M1 Design Support 16 Not e : When deleting a digit, use the or ke ys to place the cursor on th e digit to the right of the digit t o be re moved. Press the key for extended durati on to remove the digit.
DECT Industrial Ha ndset User Guide Issue 02 Galwa y M1 Design Support 17 To dial a number from the personal phone book: 1. Pre ss the key to enter the Phone Book. The first entry appe ars in the display. If the phone book is empty, the key w i ll n ot f unc ti o n.
DECT Industrial Ha ndset User Guide Issue 02 Galwa y M1 Design Support 18 5.5.5 Call er List (CLIP) When the handset rings a nd the call is not answered, it will be stored in the Caller list (CLIP). The Caller list contains a m aximum of 10 entries. The entri es in the C aller list and the Re dial list can be access ed t he same way .
DECT Industrial Ha ndset User Guide Issue 02 Galwa y M1 Design Support 19 If automatic call answering is used, the phone call will be accepted automatically. It is not necessary to press the key. 5.7 Sile nt Mode In Silent mode the handset will use the vibrator instead of ringer and bleep sounds.
DECT Industrial Ha ndset User Guide Issue 02 Galwa y M1 Design Support 20 6.3 Microphone M ute The microphone mut e can be activated or d eactivated during conv ersation by pressing the key. When the microphone mute is act ive the display show s MIC .
DECT Industrial Ha ndset User Guide Issue 02 Galwa y M1 Design Support 21 3. P res s t h e key to ente r the number. The display will show NAME:, type in a na me usi ng t he a lp ha n ume r i c ke ys . 4. Pre ss the key to enter the name in the phon e book and return to th e st and-by mode again .
DECT Industrial Ha ndset User Guide Issue 02 Galwa y M1 Design Support 22 Not e : When deleting a digit, use the or ke ys to place the cursor on th e digit to the right of the digit to be deleted. Press the key for extended duration to remove the digit.
DECT Industrial Ha ndset User Guide Issue 02 Galwa y M1 Design Support 23 To delete a personal phone book ent ry: 1. Pre ss the key to enter the phone book and selec t the entry to be d eleted. 2. Pre ss the ke y to select this entry for deletion. The display will show 'DELETE ? ' 3.
DECT Industrial Ha ndset User Guide Issue 02 Galwa y M1 Design Support 24 4. The DN and password can also be en tered to access voice mail directly. Not e 1 : It is possible for another party to determi ne the password of your voice mail if it is programmed.
DECT Industrial Ha ndset User Guide Issue 02 Galwa y M1 Design Support 25 4. Pre ss the key to r eturn to stand-by mode. 6.8 Settings Within a profile the us er can d efine several s ettings. These are described in the following sections . Each setting will hav e a default as shown in the t able below.
DECT Industrial Ha ndset User Guide Issue 02 Galwa y M1 Design Support 26 6.10 Ringer Volume The 5-step ringer volume option enables users to set the loudnes s of the bleep and ringing tones. To set the ringer volume: 1. Enter the Set Profile display and use the or key to select ringer vol.
DECT Industrial Ha ndset User Guide Issue 02 Galwa y M1 Design Support 27 6.12 Vibrator The vibrator functions when the handset is ringing or bleeping, it vibrates in the same pattern as the ring er or bleep sound. To switch the v ibrator ON/OFF: 1. Enter the Set pro file display us e the or ke y t o sel ec t vibrator .
DECT Industrial Ha ndset User Guide Issue 02 Galwa y M1 Design Support 28 6.14 Start Volume The 5-step start volume option enables users to s et the loudness of the e arpiece to a certain value to start from . Adjustment during conversation can be made with the – and the + keys at the side of the handset.
DECT Industrial Ha ndset User Guide Issue 02 Galwa y M1 Design Support 29 show backlight on or bac klight off bef ore switching to the Set P rofile display. 7 OUT OF RANGE Each handset is equipped with a n out of ra nge detection option. There are three detection mech anism for out of range.
DECT Industrial Ha ndset User Guide Issue 02 Galwa y M1 Design Support 30 9 SHOR TCUT LIST The f oll ow in g fea t ure s can b e acce ss e d easi ly vi a the sho rt c ut s men t io ne d in t he tab l e below.
DECT Industrial Ha ndset User Guide Issue 02 Galwa y M1 Design Support 31 10 MENU TREE A B B A MENU SELECT LOGIN LOGI N SYSTEM 0 1* SUBSCRIPTI ON REMOVE SUBSCRIPTIO N CREATE CREATE SEARCH I D: 1234567.
An important point after buying a device Nortel Networks Industrial Handset (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nortel Networks Industrial Handset yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nortel Networks Industrial Handset - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nortel Networks Industrial Handset you will learn all the available features of the product, as well as information on its operation. The information that you get Nortel Networks Industrial Handset will certainly help you make a decision on the purchase.
If you already are a holder of Nortel Networks Industrial Handset, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nortel Networks Industrial Handset.
However, one of the most important roles played by the user manual is to help in solving problems with Nortel Networks Industrial Handset. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nortel Networks Industrial Handset along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
