Instruction/ maintenance manual of the product 8672ATME Nortel Networks
Go to page of 162
Part No. 209 195-B Octobe r 2001 4401 Gr eat Ame rica Parkw ay Santa C lara, CA 9505 4 Using the Passport 8672A TME Module.
2 209195-B Copyright © 2001 Nortel Networks All righ ts reserv ed. Octob er 2001. The informati on in this docume nt is subject to change without notice. Th e statements, confi gurations, tech nical data, an d recommenda tions in t his docum ent are b elieved t o be acc urate and reliable, but are prese nted wit hout expres s or implied warranty .
3 Using th e Passport 86 72ATME Mod ule EC Declaration of Conformity This prod uct conforms (or these pro ducts conform ) to the pr ovisions of th e R&TTE Direct ive 1999/5/E C.
4 209195-B Nortel Networks Inc . softwar e licens e agreement This Software Lic ense Agreement (“Li cense Agreemen t ”) is b et w een you, the end-user (“Cu st omer”) and Nortel Networks Corp oration and its subsidiaries a nd affiliat es (“Nortel Networks”).
5 Using th e Passport 86 72ATME Mod ule 4. General a) If Custome r is the Unite d States Gov ernment , the followin g paragrap h shall ap ply: All No rtel Netw orks Softwar e availabl e under this Li .
6 209195-B.
7 Using t he Pass port 8672A TME Module Contents Pref ace . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Before you begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8 Contents 209195-B Chapter 3 Install ing the Passport 8672A TME Module . . . . . . . . . . . . . . . . . . . . . . . . . 37 Safety an d environm ental precauti ons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 7 Installing the Pass port 8672A TME Mo dule .
Contents 9 Using t he Pass port 8672A TME Module Chapter 5 Managing the Passport 8672A TM E Module with t he CL I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 5 Configur ation comman ds . . . .
10 Contents 209195-B Configur ing A TM F5- OAM End-to- End Loopba ck . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 1 config atm pvc f5-oam command . . . . . . . . . . . . . 112 show ports info atm pv c [slot /port] . . . . . . . . . . . . .
Contents 11 Using t he Pass port 8672A TME Module Configur ing an IPX routing 148 3 PVC using Device Mana ger . . . . . . . . . . . . . . 137 Creating two V LANs “byPort” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138 Configuring IPX network numbers .
12 Contents 209195-B.
13 Using t he Pass port 8672A TME Module Figures Figure 1 Passport 867 2A TM mod ule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 9 Figure 2 1-port OC-12c/STM-4 MDA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14 Figures 209195-B Figure 30 show ports info atm al l comma nd output . . . . . . . . . . . . . . . . . . . . . . . . . 8 6 Figure 31 show ports info atm fd b command output . . . . . . . . . . . . . . . . . . . . . . . . 89 Figure 32 show ports info atm po rts comman d output .
Figures 15 Using t he Pass port 8672A TME Module Figure 64 Circuits tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 1 Figure 65 System page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16 Figures 209195-B.
17 Using t he Pass port 8672A TME Module Ta b l e s T a ble 1 Passpo rt 8672A TME M odule onl ine LED i ndicatio ns . . . . . . . . . . . . . . . . 3 1 T a ble 2 MDA LED indi cations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18 Tables 209195-B T a ble 28 Informati on fields for the sho w ports s tats at m felinecur rent co mmand . . 97 T a ble 29 Informati on fields for the sho w ports s tats at m felineinte rval command . . . . . . . . . . . . . . . . . . . . . . . . . .
19 Using th e Passport 86 72ATME Mod ule Preface The Passpor t ® 8672 A TME Module is part of th e Nor tel Networks Pass por t l ine of communic ations produc ts. This modu le is th e Passport Asynchronous T ransfe r Mode (A TM) modul e for the Passport 8 600 chassi s.
20 Pref ace 209195-B T ex t convention s This gui de uses the followin g text conv entions: angle br ackets ( < >) Indicate that you c hoose the text to e nter base d on the descript ion insi de the bra ckets. Do not type the brackets when enteri ng the comman d.
Preface 21 Using the Pass port 8672 ATME Modu le Related publicatio ns For more i nformatio n about usi ng a Passport 8 000 Series switc h, the resi dent CLI, or Device Manag er , ref er to the foll owing publi cations: • Release Notes for t he Passport 8000 Seri es Switch Re lease 3.
22 Pref ace 209195-B • Instal ling and Mai ntaining t he Passpor t 8003 Chassi s and Component s (part n umber 313074- B Rev 00) Provides in stru ction s for in stal ling the P ass port 8003 Cha ssi.
Preface 23 Using the Pass port 8672 ATME Modu le • Networkin g Concepts f or the Pas sport 8000 S eries Swit ch (pa rt number 313196-B Rev 00) Provides g eneral inf or mation and a desc ription of how a Pa ssport 8000 Seri es switch ha ndles var ious networ king featur es, such as VLANs, MultiLin k T runking , OSPF , RIP , and IPX.
24 Pref ace 209195-B Y ou can print se lected t echnical manuals and release notes free, d irectly from the Intern et. Go to the www .nortelnetwor ks.com/ documentati on URL. Find the product for whi ch you need documentat ion . Then locate t he speci fi c c ate gor y and model or ve rsion fo r your har dware or sof tware pro duct.
25 Using th e Passport 86 72ATME Mod ule Chapter 1 About the Passport 8672A TME Module The Passpo rt 8672 A TME Module pr ovides net work trans mission us ing A TM technol ogy .
26 Chapter 1 About the Pa ssport 867 2ATME M odule 209195-B Y ou can use up to t wo Passp ort 867 2A TME Modules in on e Passport 8600 seri es chas sis.
Chapter 1 About the Pass port 867 2ATME Module 27 Using the Pass port 8672 ATME Modu le • Proprie tary MIB supp ort for c onfigura tion of RFC 14 83 and A TM port spec if ic set up • Managea ble t.
28 Chapter 1 About the Pa ssport 867 2ATME M odule 209195-B The VBR servi ce provided b y the 8672 module allows a prev iously idle channel to burst at a relati vel y high Peak Cell Rate (PCR) for a Maxim um Burst Size (MBS) of A TM cell s.
Chapter 1 About the Pass port 867 2ATME Module 29 Using the Pass port 8672 ATME Modu le Figure 1 Passp ort 8672A TM module T o configu re and manage the Passport 8672A TME Module, connect to the cons ole port of your switc h fabric mo dule (eithe r the Pass port 8690SF Modu le or the Passport 8691SF Module) .
30 Chapter 1 About the Pa ssport 867 2ATME M odule 209195-B Figure 3 4-port OC-3c/ STM- 1 MDA Figure 4 shows the Pas sport 867 2A TME Module with on e OC-12c/STM-4 MDA instal led. For i nformatio n on instal ling the M DAs, refer t o Installing Med ia Dependent Adapters f or the Pass port 86 72A TME Modul e.
Chapter 1 About the Pass port 867 2ATME Module 31 Using the Pass port 8672 ATME Modu le Table 1 lis ts the Pas sport 8672A TME Module onlin e LED indicat ions. MDA LEDs Table 2 lists th e MDA L ED indi cat io ns. Ta b l e 1 Passpo rt 8672 A TME Module online LED i ndicatio ns Online L ED State Off Card i s not recei vin g pow er.
32 Chapter 1 About the Pa ssport 867 2ATME M odule 209195-B Console and Diag ports Use the Con sole port on the Pass port 8690SF or Passpor t 8691SF module to access ma nagement fun ctions f or the Pass port 8 672A TME Module.
33 Using th e Passport 86 72ATME Mod ule Chapter 2 Passport 8672A TME Module termin ology This chapt er co n tai ns the foll o wing infor matio n: • “A TM terms an d acronyms ,” next • “SONE.
34 Chapter 2 Passport 8672ATME Module terminolog y 209195-B • SVC: Switche d virtua l circuit. On -demand c onnection between an A TM or frame relay sou rce and de stinati on that l asts for the dur ation of the transmi ssion. • VC: V irtual ci rcuit.
Chapter 2 Passport 8672ATME Module te rminolo gy 35 Using the Pass port 8672 ATME Modu le SONET terms and acronyms This sec tion provi des a bri ef listin g of common Synch ronous Opti cal Network (SONE T) te rms . SON ET is a me dium f or tr an smi tting d a ta tha t uses fibe r o ptic cables.
36 Chapter 2 Passport 8672ATME Module terminolog y 209195-B SONET transmissi on rates The foll owing tran smission r ates are commonl y used with SONET : • OC-3c/STM-1: 155.
37 Using th e Passport 86 72ATME Mod ule Chapter 3 Installing the Passport 8672 A TME Module This chap ter descr ibes the procedure for inst alling the Passport 8672A TME Module.
38 Chapter 3 Installing the Passpo rt 8672ATME M odule 209195-B • When hand ling module s, do not to uch component s on the modul es; alwa ys handle modu les by the ir edges. Store unus ed modules i n their pr otectiv e packag ing. W arning: Fiber optic e quipment c an emit l aser or infrar ed light that c an injure y our eyes.
Chapter 3 Installing th e Passpo rt 8672ATME Module 39 Using the Pass port 8672 ATME Modu le Installing the Passpo rt 8672A TME Mo dule T o install the P assport 8672A TME Module: 1 Remove the f iller panel from t he module sl ot in th e Passport 8600 seri es chas sis (Figu re 5) .
40 Chapter 3 Installing the Passpo rt 8672ATME M odule 209195-B 3 Handling t he Passport 8672A TME Module by t he sides only , careful ly align it with the card guid es in the c hassis. Sl ide the mod ule into t he slot until th e module conn ectors t ouch the ch assis bac kplane (Figure 7) .
Chapter 3 Installing th e Passpo rt 8672ATME Module 41 Using the Pass port 8672 ATME Modu le 5 T ight en the re taining screws (Figure 9) . Figure 9 Tightening the r etainer screws Y ou must insta ll at least one MDA on the Passp ort 86 72A TME Module in ord er to pass t raffic.
42 Chapter 3 Installing the Passpo rt 8672ATME M odule 209195-B Initialization When the Pas sport 8672A TME Module is install ed into a Pas sport 8600 series chassis , ensure t hat the s witch fabr ic.
Chapter 3 Installing th e Passpo rt 8672ATME Module 43 Using the Pass port 8672 ATME Modu le Figure 10 Uns uccessful do wnload screen outp ut Copyright (c) 1998-2001 Nortel Networks, Inc.
44 Chapter 3 Installing the Passpo rt 8672ATME M odule 209195-B After t he image loa ds onto th e Passport 8672A TME Module, i t performs a series of self- di agnost ic tes ts . If the modul e f ail s t h e di agn ost ics, th e scr ee n dis plays t he followi ng message: Fatal bring up error on ATM card in slot <number>.
Chapter 3 Installing th e Passpo rt 8672ATME Module 45 Using the Pass port 8672 ATME Modu le T o verify that t he Passpor t 8672A TME Module is ready t o receive and trans mit traf fic, c heck the LEDs on the modul e and the MDA.
46 Chapter 3 Installing the Passpo rt 8672ATME M odule 209195-B Starting the system after a module replacement After yo u a replac e a module on the chass is, you can e xpect the followin g results : .
47 Using th e Passport 86 72ATME Mod ule Chapter 4 Managing the Passport 8672A TME Module with Device Manager T wo management too ls ena ble you t o man age your Pa ssport 8672A TME Module: Device M anager and the command line interfa ce (CLI). Y ou can al so use the embedde d W eb-based management feature to monitor the 86 72A TME Module.
48 Chapter 4 Managing the Passpo rt 8672ATME M odule wit h Device Manager 209195-B The m a nag e ment syst em s ide ntif y an in te rfac e by it s sl ot n umbe r ( in th e Pass port 8600 seri es chass is) and i ts port numb er , usi ng the synt ax slot numb er/port number (s/p).
Chapter 4 Managing th e Passport 8672ATME Module wi th Devic e Manager 49 Using the Pass port 8672 ATME Modu le For detai l ed informat ion on all aspe cts of ins tal l ing and r unni ng Device Ma nag.
50 Chapter 4 Managing the Passpo rt 8672ATME M odule wit h Device Manager 209195-B Figure 1 1 Passpo rt 8000 s eries cha ssis with Passport 8672 A TME Mo dule The ports on the graphica l image are color -co ded to prov ide at-a -glance po rt sta tus. Ta b l e 3 shows the st atus assigne d to each c olor .
Chapter 4 Managing th e Passport 8672ATME Module wi th Devic e Manager 51 Using the Pass port 8672 ATME Modu le Addition ally , many Devic e Manager wind ows and dial og boxes con tain buttons .
52 Chapter 4 Managing the Passpo rt 8672ATME M odule wit h Device Manager 209195-B Changing default settings T o change the de fault se ttings on the Passpo rt 8000 Ser ies switch or to perf orm any co nfiguratio n tasks in Device Manager: The Port d ialog box o pens with t he Interfac e tab dis played (Figure 12 ) .
Chapter 4 Managing th e Passport 8672ATME Module wi th Devic e Manager 53 Using the Pass port 8672 ATME Modu le Ta b l e 5 desc rib es the Inter face tab fi eld s. Ta b l e 5 A TM Int erface tab fi elds Item Descriptio n Index Unique value as signed t o each in terface.
54 Chapter 4 Managing the Passpo rt 8672ATME M odule wit h Device Manager 209195-B Resetting the mo dule T o reset the mod ule: 1 Highligh t the module . 2 From the Dev ice Manager menu bar , choose Edit > Car d. The Card di alog box op ens with th e Card tab d isplayed (Figure 13 ) .
Chapter 4 Managing th e Passport 8672ATME Module wi th Devic e Manager 55 Using the Pass port 8672 ATME Modu le Figure 13 Card ta b Ta b l e 6 describe s the Card t ab fields. Ta b l e 6 Card tab fie lds Field Descripti on FrontT ype Card ty pe. FrontDe scription A TM.
56 Chapter 4 Managing the Passpo rt 8672ATME M odule wit h Device Manager 209195-B 3 Click th e A TM tab. The A TM tab opens (Figure 14 ) . Figure 14 AT M t a b 4 Click re set. 5 Click Appl y . V iewing MDA information T o view informatio n on the MDA yo u are usin g, 1 Highligh t the MDA.
Chapter 4 Managing th e Passport 8672ATME Module wi th Devic e Manager 57 Using the Pass port 8672 ATME Modu le Figure 15 MDA dialog bo x Ta b l e 7 describe s the MDA dialo g box fiel ds. Enabling or disabling a port Y ou can enable or disable a port by t wo methods.
58 Chapter 4 Managing the Passpo rt 8672ATME M odule wit h Device Manager 209195-B 4 Click Appl y . T o enable or disa ble a port using a sh ortcut menu : 1 Right-c lick on th e port.
Chapter 4 Managing th e Passport 8672ATME Module wi th Devic e Manager 59 Using the Pass port 8672 ATME Modu le Figure 16 A T M tab Ta b l e 8 describe s the A TM tab fie lds.
60 Chapter 4 Managing the Passpo rt 8672ATME M odule wit h Device Manager 209195-B Editing circuit param eters To view and configure A TM PVC parameters: 1 On the devi ce view , highlight a port. 2 From the Dev ice Manager menu bar , choose Edit > Por t.
Chapter 4 Managing th e Passport 8672ATME Module wi th Devic e Manager 61 Using the Pass port 8672 ATME Modu le Figure 17 AT M P V C t a b Ta b l e 9 describe s the ATM PVC tab fie lds. Ta b l e 9 A TM PV C tab fields Item Description Vpi Virt ual path i dentifier .
62 Chapter 4 Managing the Passpo rt 8672ATME M odule wit h Device Manager 209195-B 4 Click In sert. The Inser t A TM PVC dia log box opens (Figu re 18) . Figure 18 Ins ert A TM PV C dialog box Ta b l e 1 0 describes t he Port, I nsert A TM PVC dia log box fi elds.
Chapter 4 Managing th e Passport 8672ATME Module wi th Devic e Manager 63 Using the Pass port 8672 ATME Modu le 5 In the Vpi fi e ld, ty pe the V PI-b it size . 6 In the Vci fi eld , type the V C I-b it size . 7 In the Na me field, type the name of t he A TM PVC.
64 Chapter 4 Managing the Passpo rt 8672ATME M odule wit h Device Manager 209195-B Figure 19 A T M PVC tab with a P VC sele cted 6 Click Del ete. The PVC is de leted. Configuring A TM 1483 ELAN parameters T o view and confi gure A TM 1483 ELAN para meters for the port : 1 On the devi ce view , highlight a port.
Chapter 4 Managing th e Passport 8672ATME Module wi th Devic e Manager 65 Using the Pass port 8672 ATME Modu le Ta b l e 1 1 describes the A TM 1483 ELA N tab fiel ds. 4 Click In sert. The Inser t A TM 1483 EL AN dialog box o pens (F igure 21) . Ta b l e 1 1 A TM 1483 E LAN tab fie lds Field Desc ription VlanId VLAN to whi ch the ELAN b elongs.
66 Chapter 4 Managing the Passpo rt 8672ATME M odule wit h Device Manager 209195-B Figure 21 Port, Insert A T M 1483 E LAN dial og box Ta b l e 1 2 describes t he Insert A TM 1483 ELAN dialog bo x fields. Ta b l e 1 2 Port, I nsert A TM 1483 ELA N dialo g box fie lds Item Description VlanId VLAN ID.
Chapter 4 Managing th e Passport 8672ATME Module wi th Devic e Manager 67 Using the Pass port 8672 ATME Modu le 5 In the Vlan Id fi el d, ty pe th e VLA N ID. 6 In the PvcI ds fi eld, type th e PV C ID. 7 In the Con nectT ype field, se lect the type of r outing pro tocol: br idged, ip, or ipx.
68 Chapter 4 Managing the Passpo rt 8672ATME M odule wit h Device Manager 209195-B Figure 22 Ins ert A TM 148 3 ELAN di alog box for IP routi ng 10 If Ipx i s selected in the Conne ctT ype field, comple te the f ollowing f ields: a In the I pxVlanEncapMet hod, selec t the encaps ulation met hod (llc , snap, ether -ii , or raw).
Chapter 4 Managing th e Passport 8672ATME Module wi th Devic e Manager 69 Using the Pass port 8672 ATME Modu le Figure 23 Ins ert A TM 148 3 ELAN di alog box for IPX routing Deleting an A TM 1483 ELAN T o delete an A TM 1483 ELAN: 1 On the devi ce view , highlight a port.
70 Chapter 4 Managing the Passpo rt 8672ATME M odule wit h Device Manager 209195-B 5 Click Del ete. The A TM 1483 ELAN is del eted. Configuring A TM F5- OAM En d-to-End Loopback A Passport 8672A TME Module, by def ault, repli es to A TM F5-OAM Loopback request s re ce ive d.
Chapter 4 Managing th e Passport 8672ATME Module wi th Devic e Manager 71 Using the Pass port 8672 ATME Modu le Figure 25 A T M PVC di alog box— A TM PV C tab 2 Highligh t a PVC. 3 Click F5 Lo opback. The F5 Loopba ck dialog box opens wit h the F5 Loop back tab di splayed (Fig ure 26) .
72 Chapter 4 Managing the Passpo rt 8672ATME M odule wit h Device Manager 209195-B Displaying F5 Loopback statistics T o display F5 Loo pback statis tics: 1 From the Dev ice Manager menu bar choo se Edit > A TM. The A TM dialog box opens with the A TM PVC tab displ ayed (F igure 18) .
Chapter 4 Managing th e Passport 8672ATME Module wi th Devic e Manager 73 Using the Pass port 8672 ATME Modu le Ta b l e 1 4 describes t he fields i n the F5 Loopb ack Stats tab. Displaying statistics u sing Device Manag er Statis tics are not suppo rted in Devi ce Manager in this rele ase.
74 Chapter 4 Managing the Passpo rt 8672ATME M odule wit h Device Manager 209195-B.
75 Using th e Passport 86 72ATME Mod ule Chapter 5 Managing the Passport 8672A TME Module with the CLI Y ou can manage yo ur Passport 8672A TME Module through the command li ne interf ace (CLI) . Y ou can also use t he embedded W eb-based management featur e to monito r the 8672A TME Module.
76 Chapter 5 Managing the Passpo rt 8672ATME M odule wit h the CLI 209195-B Configuratio n command s This sec tion desc ribes the CLI config uration c ommands availabl e with the Passport 8672A TME Modul e.
Chapter 5 Managing the P assport 8672ATME Module wi th the CLI 77 Using the Pass port 8672 ATME Modu le Ta b l e 1 5 conf ig atmca rd comm and param eters an d varia bles 1483 ELAN statisti cs The 1483 ELAN st atisti cs commands al low you to c ollect EL AN statist ics for an A TM port.
78 Chapter 5 Managing the Passpo rt 8672ATME M odule wit h the CLI 209195-B show atm elan-stats <vlan id> Use this command t o displ ay the ELAN stat isti cs for a par ticul ar VLAN ID. If th e collec tion of ELAN st atisti cs is disab led, a mes sage is p rinted befor e the ELAN statis tic s.
Chapter 5 Managing the P assport 8672ATME Module wi th the CLI 79 Using the Pass port 8672 ATME Modu le clear atm elan-stats Use this command to cl ear the ELAN s tatisti cs for a particular VLAN ID.
80 Chapter 5 Managing the Passpo rt 8672ATME M odule wit h the CLI 209195-B config atm command Ta b l e 1 7 describes the parame ter s and varia bles for the config atm < ports > comm and .
Chapter 5 Managing the P assport 8672ATME Module wi th the CLI 81 Using the Pass port 8672 ATME Modu le config atm pvc command Ta b l e 1 8 de scrib es the parame ter s a nd va riable s for t he config atm pvc comm and . state <e nable | d isable> Sets the state of the port to en abled or d isabled.
82 Chapter 5 Managing the Passpo rt 8672ATME M odule wit h the CLI 209195-B config atm pvc 1483 command Use th e config atm pvc 1483 commands to configur e 1483 para meters on the Pass port 86 72A TME Module.
Chapter 5 Managing the P assport 8672ATME Module wi th the CLI 83 Using the Pass port 8672 ATME Modu le Ta b l e 2 0 de scrib es the parame ter s a nd va riable s for t he config atm pvc 1483 ip command.
84 Chapter 5 Managing the Passpo rt 8672ATME M odule wit h the CLI 209195-B Ta b l e 2 1 c onfig atm pvc 1483 ipx comma nd parame ters and variab les config atm info command Figure 29 shows a sample of the output resultin g from execut ing the config atm info command.
Chapter 5 Managing the P assport 8672ATME Module wi th the CLI 85 Using the Pass port 8672 ATME Modu le Show comm ands This sec tion disc usses the CLI show commands availabl e with the Passport 8672A TME Module.
86 Chapter 5 Managing the Passpo rt 8672ATME M odule wit h the CLI 209195-B Figure 30 show ports inf o atm all comm and outp ut Passport-8610:5/show/ports/info/atm# all ===============================.
Chapter 5 Managing the P assport 8672ATME Module wi th the CLI 87 Using the Pass port 8672 ATME Modu le Ta b l e 2 2 de scrib es the infor matio n fiel ds for the show ports info atm all command. Ta b l e 2 2 Informa tion fiel ds for th e show ports info atm a ll comma nd Field Descripti on PORT NUM Port number .
88 Chapter 5 Managing the Passpo rt 8672ATME M odule wit h the CLI 209195-B show ports info atm fdb command This command displa ys inf or ma ti on ( Figure 31) about the For warding Dat a Base (FDB) for th e 1483 brid ged p oi nt to mu lti- p oint P V Cs.
Chapter 5 Managing the P assport 8672ATME Module wi th the CLI 89 Using the Pass port 8672 ATME Modu le Figure 31 show ports info at m fdb co mmand outp ut Ta b l e 2 3 de scrib es the infor matio n fiel ds for the show ports info atm fdb command.
90 Chapter 5 Managing the Passpo rt 8672ATME M odule wit h the CLI 209195-B Figure 32 sh ow ports i nfo atm ports comman d output Ta b l e 2 4 de scrib es the infor matio n fiel ds for the show ports info atm ports command. Ta b l e 2 4 Informa tion fiel ds for th e show ports info atm p orts comm and Field Descripti on PORT NUM Port number .
Chapter 5 Managing the P assport 8672ATME Module wi th the CLI 91 Using the Pass port 8672 ATME Modu le show ports info atm pvc command This command displa ys inf or ma ti on ( Figure 33) about the permanen t virtu al circui ts (PVCs) f or the spe cified port or for a ll ports.
92 Chapter 5 Managing the Passpo rt 8672ATME M odule wit h the CLI 209195-B Figure 33 sho w ports i nfo atm pvc co mmand o utput Ta b l e 2 5 de scrib es the infor matio n fiel ds for the show ports info atm pvc command. Ta b l e 2 5 Informa tion fiel ds for th e show ports info atm p vc comm and Field Descripti on PORT NUM Port number .
Chapter 5 Managing the P assport 8672ATME Module wi th the CLI 93 Using the Pass port 8672 ATME Modu le show ports info atm 1483 command This command displa ys inf or ma ti on ( Figure 34) about 1483 circuits f or the spec ified por t or for all port s.
94 Chapter 5 Managing the Passpo rt 8672ATME M odule wit h the CLI 209195-B show ports stats atmport command This comma nd d ispl ays s tatis tics for atm ports (Figure 35) .
Chapter 5 Managing the P assport 8672ATME Module wi th the CLI 95 Using the Pass port 8672 ATME Modu le Figure 35 sho w ports s tats a tmport [< port num>] com mand o utput Ta b l e 2 7 de scrib es the infor matio n fiel ds for the show ports stats atmport command.
96 Chapter 5 Managing the Passpo rt 8672ATME M odule wit h the CLI 209195-B show ports stats at m felinecurrent This command displays current s tatistic s on the fa r end lin e, which is at the receiv ing end.
Chapter 5 Managing the P assport 8672ATME Module wi th the CLI 97 Using the Pass port 8672 ATME Modu le Figure 36 sho w ports s tats a tm feli necurren t comm and output Ta b l e 2 8 de scrib es the infor matio n fiel ds for the show ports stats atm felinecurrent command.
98 Chapter 5 Managing the Passpo rt 8672ATME M odule wit h the CLI 209195-B show ports stats atm felineinte rva l This comman d displa ys st at is tics (F igure 37) on the far end l ine over a 15- minute inter val. Y o u spe ci fy wh ich in terva l, or sp an of i nterv als, t o disp lay fo r the command.
Chapter 5 Managing the P assport 8672ATME Module wi th the CLI 99 Using the Pass port 8672 ATME Modu le show ports stats atm fepathcurrent This command displ ays cu rrent stat isti cs (Figu re 38) for the far e nd path, whi ch is at the r eceivin g end.
100 Chapter 5 Managing the P assport 8672ATME Module with th e CLI 209195-B Ta b l e 3 0 de scrib es the infor matio n fiel ds for the show ports stats atm fepathcurrent command. show ports stats at m fepathinterval This command displa ys statist ics (Fig ure 39) on the far en d pa th over a 15-mi nut e interv al.
Chapter 5 Managing the Passpo rt 8672ATME Modu le with the CLI 101 Using the Pass port 8672 ATME Modu le Figure 39 sho w ports s tats a tm fepa thinterval comma nd output Ta b l e 3 1 de scrib es the infor matio n fiel ds for the show ports stats atm fepathinterval command.
102 Chapter 5 Managing the P assport 8672ATME Module with th e CLI 209195-B show ports stats atm linecurrent This comma nd d ispl ays c urre nt st atisti cs (Figure 40) for th e line .
Chapter 5 Managing the Passpo rt 8672ATME Modu le with the CLI 103 Using the Pass port 8672 ATME Modu le show ports stats atm lineinterval This command displa ys sta ti st ic s ( Figure 41) for the l ine over a 15-min ute interv al. Y ou can spe cify any interv al or span of int ervals.
104 Chapter 5 Managing the P assport 8672ATME Module with th e CLI 209195-B Ta b l e 3 3 de scrib es the infor matio n fiel ds for the show ports stats atm lineinterval command. show ports stats atm pathcurrent This comma nd d ispl ays c urre nt st atisti cs (Figure 42) on the pat h, on the transmi tting end.
Chapter 5 Managing the Passpo rt 8672ATME Modu le with the CLI 105 Using the Pass port 8672 ATME Modu le Figure 42 sho w ports s tats a tm path curren t command output Ta b l e 3 4 de scrib es the infor matio n fiel ds for the show ports stats atm pathcurrent command.
106 Chapter 5 Mana ging the P assport 8672ATME Module with th e CLI 209195-B show ports stats atm pathinterval This command disp lays sta tist ics (Figur e 43) on the pa th for a 15 -minute interv al. Y ou specify the interval or span of interv als to di splay .
Chapter 5 Manag ing the Passpo rt 8672ATME Modu le with the CLI 107 Using the Pass port 8672 ATME Modu le show ports stats atm sectioncurrent This command displa ys the curre nt st ati st ic s ( Figure 44) on the sec tion.
108 Chapter 5 Mana ging the P assport 8672ATME Module with th e CLI 209195-B Ta b l e 3 6 de scrib es the infor matio n fiel ds for the show ports stats atm sectioncurrent command. show ports stats atm sectioninterval This command displa ys sta ti st ic s ( Figure 45) on the sec tion over a 15-minute interv al.
Chapter 5 Manag ing the Passpo rt 8672ATME Modu le with the CLI 109 Using the Pass port 8672 ATME Modu le Figure 45 sho w ports s tats a tm secti oninterv al comm and out put Ta b l e 3 7 de scrib es the infor matio n fiel ds for the show ports stats atm sectioninterval command.
110 Chapter 5 Mana ging the P assport 8672ATME Module with th e CLI 209195-B show ports stats atm sonetmediumt bl This command displa ys sta ti st ic s ( Figure 46) on the SONET medium.
Chapter 5 Manag ing the Passpo rt 8672ATME Modu le with the CLI 111 Using the Pass port 8672 ATME Modu le Configuring A TM F5- OAM En d-to-End Loopback A Passport 8672A TME Module, by def ault, repli es to A TM F5-OAM Loopback request s re ce ive d.
112 Chapter 5 Mana ging the P assport 8672ATME Module with th e CLI 209195-B config atm pvc f5-oam command This CL I command enabl es/disa bles and co nfigures the F5-OAM Loopba ck featur e for a vi rtual ci rcuit ( VC). When th is command is use d for disa bling the F5-OAM Loopba ck on a VC, the configur ation par ameters are i gnored.
Chapter 5 Manag ing the Passpo rt 8672ATME Modu le with the CLI 113 Using the Pass port 8672 ATME Modu le For exampl e, to en able F5-OAM Loopba ck for VPI=0 & VCI= 33 in port 6 of an A TM card in.
114 Chapter 5 Mana ging the P assport 8672ATME Module with th e CLI 209195-B Figure 47 Sam ple output for the show ports info atm pvc [slot/port] com mand As shown in Figure 47 , only thr ee PVCs have its F5-OAM Loopback enabl ed. Further more, only on e PVC (3/5 0.
Chapter 5 Manag ing the Passpo rt 8672ATME Modu le with the CLI 115 Using the Pass port 8672 ATME Modu le Ta b l e 4 0 defines t he stat us and stati stics i n the show ports info atm f5-oam [slot/port] command.
116 Chapter 5 Mana ging the P assport 8672ATME Module with th e CLI 209195-B Displaying packe t loss cou nters The CLI command sh ports stats interface main d ispla ys packet loss counter s.
117 Using th e Passport 86 72ATME Mod ule Chapter 6 Configuring the Passport 8672A TME Module This chap ter cont ains the f ollowing topi cs: • “Initi al confi guration ,” next • “Basic c on.
118 Chapter 6 Co nfiguring t he Passpor t 8672ATME Mo dule 209195-B Before yo u can pass t raf fic using t he Pass port 8 672A TME Module with it s instal led MDA, you must c hange the clock set ting.
Chapter 6 Configu ring the Passport 8672 ATME M odule 119 Using the Pass port 8672 ATME Modu le Figure 49 AT M t a b T able 8 on page 5 9 de scrib es the A TM tab fiel ds. 4 T o set the clock s etting, i n the Cloc kSource sec tion, click loopT i med or freeRunn ing.
120 Chapter 6 Co nfiguring t he Passpor t 8672ATME Mo dule 209195-B Basic configuration procedures This sec tion provi des inst ructions on c onfiguri ng the Passpor t 8672A TME Module with Device Man.
Chapter 6 Configu ring the Passport 8672 ATME M odule 121 Using the Pass port 8672 ATME Modu le Figure 50 Poi nt-to-poin t bridging u sing 148 3 PVCs T o c om ple te this con fi gur ation , use the fo.
122 Chapter 6 Co nfiguring t he Passpor t 8672ATME Mo dule 209195-B Ta b l e 4 2 describes t he Basic tab f ields. 2 Click In sert. The VLAN, Inser t Basic di alog box op ens (Figure 5 2) . Ta b l e 4 2 Basic ta b fields Field Desc ription Id Unique VLAN iden tifier .
Chapter 6 Configu ring the Passport 8672 ATME M odule 123 Using the Pass port 8672 ATME Modu le Figure 52 VLA N, Inse rt Basi c dialo g box Ta b l e 4 3 describes t he VLAN, Insert Bas ic dialo g box fiel ds. Ta b l e 4 3 VLAN , Insert Basic dialog box fiel ds Field Desc ription Id Unique VLAN iden tifier .
124 Chapter 6 Co nfiguring t he Passpor t 8672ATME Mo dule 209195-B 3 Do th e foll owin g: a In the Id fi el d, en ter t h e Id nu mbe r for th e VLA N (an i nte ger be twee n 0 and 4094). b In the Na me field, ente r the VLAN name. c In the Colo r I denti fier fi eld, s elect a colo r from t he list .
Chapter 6 Configu ring the Passport 8672 ATME M odule 125 Using the Pass port 8672 ATME Modu le 5 Click OK. The VlanPor tMembers dia log box cl oses and th e VLAN, Insert Basi c dialog is red isp la yed . 6 Click Clo se. Configuring an A TM 1483 P VC T o configure an A TM 1483 PVC: 1 From the Dev ice Manager menu b ar , choos e Edit > A TM.
126 Chapter 6 Co nfiguring t he Passpor t 8672A TME Modul e 209195-B h If you se lect vbr in the Ser vice type fi eld, com plete th ese fields: In the Pe akCellRate field, e nter the PCR (a n inte ger between 86 and 733490 ). In the Su stainedCel lRate fi eld, ente r the SCR (a n integer between 86 a nd 733490 ).
Chapter 6 Configu ring the Passport 8672 ATME M odule 127 Using the Pass port 8672 ATME Modu le 5 Click In sert. The Inse rt A TM 1483 ELAN d ialog box close s, and the A TM 1483 ELAN tab is red isp la yed .
128 Chapter 6 Co nfiguring t he Passpor t 8672A TME Modul e 209195-B Figure 54 Poi nt-to-mul tipoint br idging u sing A TM 1 483 PVCs This config uration requ ires the foll owing proced ures: • “C.
Chapter 6 Configu ring the Passport 8672 ATME M odule 129 Using the Pass port 8672 ATME Modu le Bridging point-to-multipoint traffic using an A TM 1483 PVC using the CLI T o configure tw o A TM 1483 b.
130 Chapter 6 Co nfiguring t he Passpor t 8672A TME Modul e 209195-B Figure 55 IP rou ting wi th A TM 1 483 PVCs This config uration requ ires the foll owing proced ures: • “Creati ng a VLAN “by.
Chapter 6 Configu ring the Passport 8672 ATME M odule 131 Using the Pass port 8672 ATME Modu le 3 Click IP . The IP , VLAN dialog box opens wi th the IP Address tab displaye d (Fig ure 56) . Figure 56 IP A ddress ta b Ta b l e 4 5 de scrib es the IP Ad dr ess ta b fiel ds.
132 Chapter 6 Co nfiguring t he Passpor t 8672A TME Modul e 209195-B Ta b l e 4 6 describes t he IP , VLAN, Insert I P Address di alog box fi elds. 5 In the I P Address f ield, type th e IP add ress for th e VLAN. 6 In the Ne t Mask fiel d, type the net mask value .
Chapter 6 Configu ring the Passport 8672 ATME M odule 133 Using the Pass port 8672 ATME Modu le 4 Click th e RIP tab. The RIP tab opens ( Figure 58) . Figure 58 RIP tab Ta b l e 4 7 de scri bes th e RIP tab fi elds . Ta b l e 4 7 RIP t ab fields Field Desc ription Enable IP addre ss of the VLAN .
134 Chapter 6 Co nfiguring t he Passpor t 8672A TME Modul e 209195-B 5 Click Ena ble. 6 Click Appl y . The IP Address tab i s redispl ayed. 7 Click Clo se. Enabling OSPF routing If the routing prot ocol is OSPF , to enable OSPF routing: 1 From the Dev ice Manager menu b ar , choos e VLAN > VLANs.
Chapter 6 Configu ring the Passport 8672 ATME M odule 135 Using the Pass port 8672 ATME Modu le Figure 59 OS PF ta b Ta b l e 4 8 describes t he OSPF tab fi elds.
136 Chapter 6 Co nfiguring t he Passpor t 8672A TME Modul e 209195-B 5 Click Ena ble. 6 Click Appl y . The OSPF tab c loses, and the IP Addr ess tab i s redisplaye d. 7 Click Clo se. Configuring a null-encapsulation PVC See “Co nfigurin g two A TM 1483 PVCs on the same A TM port” on page 128 .
Chapter 6 Configu ring the Passport 8672 ATME M odule 137 Using the Pass port 8672 ATME Modu le 2 T o add an A TM port ( in this exampl e, 1/1) and several Ethernet ports (i n this example, 3/ 40 to 3.
138 Chapter 6 Co nfiguring t he Passpor t 8672A TME Modul e 209195-B Figure 60 IPX routing wit h A TM 148 3 PVCs This config uration requ ires the foll owing proced ures: • “Creating t wo VLANs .
Chapter 6 Configu ring the Passport 8672 ATME M odule 139 Using the Pass port 8672 ATME Modu le Configuring IPX network numbers T o configure the IPX network nu mbers fo r both VLANs: 1 From the Dev ice Manager menu b ar , choos e VLAN > VLANs. The VLAN dialo g box opens wi th the Bas ic tab di splayed (Figure 51) .
140 Chapter 6 Co nfiguring t he Passpor t 8672A TME Modul e 209195-B Figure 62 IPX VLAN, Ins ert dialog box Ta b l e 5 0 describes t he IPX VLAN, Inse rt dialog box fields. 5 In the Ne tAddr field, c onfigure the IP X network number s for th e VLAN. 6 In the En cap fiel d, click t he encapsul ation type.
Chapter 6 Configu ring the Passport 8672 ATME M odule 141 Using the Pass port 8672 ATME Modu le Ta b l e 5 1 describes t he Globals ta b item. 2 Click Rout ingEnable .
142 Chapter 6 Co nfiguring t he Passpor t 8672A TME Modul e 209195-B Ta b l e 5 2 describes t he Circuits tab fiel ds. 3 In the Oper Stat e fiel d, en te r “u p” for all IPX n etwo rk n u mber s cr ea ted in this procedur e. 4 Click Appl y . 5 Click Clo se.
Chapter 6 Configu ring the Passport 8672 ATME M odule 143 Using the Pass port 8672 ATME Modu le Configuring an IPX routing 1483 P VC using the CLI T o configure the Pass port 8672A TME Module f or thi.
144 Chapter 6 Co nfiguring t he Passpor t 8672A TME Modul e 209195-B.
145 Using th e Passport 86 72ATME Mod ule Chapter 7 W e b Management W eb management all ows you to monito r the Passpo rt 8672A TME Module thro ugh a W orld W ide W eb browser fro m anywhere on y our network . The W eb interf ace provide s many of the same monitor ing feat ures as t he Device Mana ger software .
146 Chapter 7 Web Managemen t 209195-B Figure 65 Sy stem page Ta b l e 5 3 describes t he fields di splayed i n the Syst em page. Ta b l e 5 3 System page f iel ds Field Desc ription sysDes cr Port type of this inte rface.
Chapter 7 Web M anagement 14 7 Using the Pass port 8672 ATME Modu le When you cli ck A TM in the navigation pa ne, the hea dings in t he A TM menu are display ed. The headi ngs provi de options for viewi ng A TM parameters (Fig ure 66) . Figure 66 A T M menu T o view the curren t PVC parameters , in the A TM m enu, cli ck PVC.
148 Chapter 7 Web Managemen t 209195-B Figure 67 PV C page Ta b l e 5 4 de scri bes th e fiel ds d is pla yed in the PV C pa ge. Ta b l e 5 4 PVC pag e item s Field Desc ription Index Uniq ue value assigne d to each interface. Vpi VPI number . Vci VCI numb er .
Chapter 7 Web M anagement 14 9 Using the Pass port 8672 ATME Modu le T o view th e current 1483 ELAN parameters , in the A TM menu, click 1483 ELAN. The 1483 ELAN page ope ns. Figur e 68 shows the l eft section of th e page. T o view the ent ire table, u se the scr oll arr ow at the bo ttom right cor ner .
150 Chapter 7 Web Managemen t 209195-B Ta b l e 5 5 describes t he fields di splayed i n the 1483 EL AN page. T o vie w the cur rent p ort para meters , in the A TM me nu, c lic k Port. T he Por t page opens (Figure 7 0) . Ta b l e 5 5 1483 ELAN page item s Field Desc ription Index Unique value as signed to each int erface.
Chapter 7 Web M anagement 15 1 Using the Pass port 8672 ATME Modu le Figure 70 Port p age Ta b l e 5 6 de scri bes th e fiel ds d is pla yed in the Po rt p a ge. Ta b l e 5 6 Port p age items Field Des cription Index Interfa ce Index. Num Vpi Bi ts Fo r OC-3, 1 1 bits split between Nu mVpiBits and NumVci Bits.
152 Chapter 7 Web Managemen t 209195-B Frami ng Mode Sets the fram ing for the port to: • sone t (Synchron ous Optica l Network ), the stan dard forma t used in North Americ a. • sdh (Sy nchro nous Dig ital Hie rarchy ), the sta ndard for mat used worldwi de except in North Am erica.
153 Using th e Passport 86 72ATME Mod ule Appe ndix A T echnical Specifications This appe ndix list s the te chnical spec ificati ons for t he Passport 8672A TME Module.
154 Appendi x A Techni cal Spec ificati ons 209195-B Safety agenc y approvals UL Listed (UL 1 950) CUL CSA 22. 2 No. 950 IEC 950/ EN 60950 CE mark CB Sche me T est Repor t and Cert ification NOM (NOM-.
155 Using th e Passport 86 72ATME Mod ule Appe ndix B Factory defaults Ta b l e 5 7 shows the def ault settin gs on the Passport 8672A TME Module as it comes from the factory , as well as the management tool to change paramet ers.
156 Appendi x B Factor y defaults 209195-B.
Using th e Passport 86 72ATME Mod ule 157 Index A access, passwords 49 action command 80 Action f ield, po rt 54 add command 82 Admi nSta tus fi eld, p ort 53 AT M configurin g 51 managing 5 1 A TM (a.
158 Index 209195-B config atm pvc 148 3 bridge d command 82 config atm pvc 148 3 command 82 config atm pvc 148 3 ip comma nd 82 config atm pvc 148 3 ipx command 82 config atm pvc command 81 config atm.
Index 159 Using the Pass port 8672 ATME Modu le I I/O modu le hot-sw apping 45 ifIndex field 59 image filename 7 7 InArpSend Enab le field 65, 66, 150 InArpSend Interval field 65, 66, 150 index f ield.
160 Index 209195-B MediaT ype field 59 MMF (mult imode fiber) 25 module resetting 54 module conf ig urat i on 51 module conf ig urat i on commands 76 module init ialization 41 module replacement 45 mu.
Index 161 Using the Pass port 8672 ATME Modu le PVCs creating 81 displa ying inf ormat ion 91 PVCs, configurin g 60 R rcStgT aggedBpduVl anId field 65 reboo t 77 Remo te Ip Addr ess fiel d 15 0 Remote.
162 Index 209195-B sysUpTime field 146 T technical publications 24 technical specifications 153 technical support 24 techno logy ov ervi ew 3 3 test in g 73, 80 text co nventions 20 timing 60 , 80 tra.
An important point after buying a device Nortel Networks 8672ATME (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nortel Networks 8672ATME yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nortel Networks 8672ATME - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nortel Networks 8672ATME you will learn all the available features of the product, as well as information on its operation. The information that you get Nortel Networks 8672ATME will certainly help you make a decision on the purchase.
If you already are a holder of Nortel Networks 8672ATME, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nortel Networks 8672ATME.
However, one of the most important roles played by the user manual is to help in solving problems with Nortel Networks 8672ATME. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nortel Networks 8672ATME along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
