Instruction/ maintenance manual of the product CAR KIT CK-100 Nokia
Go to page of 30
Nokia Car Kit CK-1 00 User and Installation Guide 920990 8 Issue 2.
DECLARATION OF CONFORMI TY Hereby, NOKIA COR PORATION, declares that t h is HF-22 product is in compliance with the essential requirements and other relevant prov isions of Directive 1999/5/EC. The product is in conformity with the limits defined in Di rective 2004/104/EC (ame nding Directive 72/245/ EEC), Annex I, paragraph 6 .
3 Contents For your safety ......................... 4 1. Introduction ......................... 5 Bluetooth wireles s technology .......... 5 2. Getting started ..................... 6 Parts ........................ ................ ................ .
For your safety 4 For your safety Read these simple guidelines. Not follow ing them may be dangerous or illegal. Read the complete user and installa tion guide for further information. SWITCH ON SAFELY Do not switch the device on w hen wireless phone us e is prohibited or when it may cause interference or danger.
Introduction 5 1. Introduction With the Nokia Car Kit CK-10 0, you can conveniently make and an swer calls hands-free and listen to musi c from your compatible device. You can operate the car kit using the supplied input device. The car kit also includes voice prompts that guide you in its use.
Getting started 6 2. Getting started ■ Pa r t s The car kit contains the following parts: 1. Hands-free unit HF-22 2. Power cable PCU-4 or CA-153P (not included in all sales packages) 3. ISO cable CA-135 or CA-152 (not included in all sales packages) 4.
Getting started 7 ■ Input device You can operate the car kit using the input device. The device is provided with the Navi wheel th at you can t urn or press. Turn the wheel to adjust the volume when you are using the mobile phone or music device connected to the car kit.
Getting started 8 • Disconnect your phone and music device (if any) from the car kit. See “Disconnect the car kit,” p. 10. The car kit automatically switches off aft er 2 min ute s. • Turn the Navi wheel to the left until the car kit plays a short beep and the blue indicator light starts to flash.
Getting started 9 If you want to pair and connect a music device that supports the A2DP Bluetooth profile, disconnect the car kit from your phone if the phone supports this profile. 2. Activate the Bluetooth feature on your device, and set the device to search for Bluetooth devices.
Getting started 10 To start the search, press and hold th e Navi wheel for about 2 seconds. During the search, the blue indicator light of the input device flashes slowly. The car kit first tries to connect to the phone that was last used with it and, if this fails, then to one of the other phones that have been most recently paired with it.
Operation 11 3. Operation ■ Make a call To make a call, use your mobile phone in the normal way when the car kit is connected to it. (T o cancel th e call, press th e Navi wheel.) Speak towards the car kit microphone. For optimal performance, check that there are no objects in front of the microphone and that the microphone is in front of you.
Operat ion 12 ■ Manage two calls at the same time To use these features, your mobile phone must support the HFP Bluetooth profile 1.5. To end the current call and activate a call on hold, press the Navi wheel. To end the current call and answer a waiting call, press the Navi wheel.
Operation 13 1. Ensure that the car kit is switched on and connected to your mobile phone. 2. Press and hold the Navi wheel for over 5 seconds when no call is in progress.
Troubleshooting 14 4. T roubleshooting ■ Connection issues I cannot connect the car ki t to my device th rough a Bluetooth connection. • Ensure that the car kit is switched on and paired wi th your device. • Check that the Bluetooth feature is activated on your device.
Trouble shooting 15 • If the car kit is connected to the supplied loudspeaker, check that th e car kit volume is set properly. The car kit does not play sound in stereo. • Check that the car radio is set to receive audio through the stereo input. • Check that you have selected th e correct audio source in the car radio.
Troubleshooting 16 ■ Other issues The car kit does not switch on when I turn on the car ignition. Ask the technician who installed the car kit to ensure th at the ignition sense wire is properly connected. The battery of the mobile phone doe s not charge when the device is connected to the car kit.
Installation 17 5. Installation ■ Safety information Observe the following safety guidelines when installing the car kit: • Only a qualified service technician should install or service the car kit using the approved original Nokia parts supplied in the sales package.
Installation 18 car kit and any of its components are not installed where you might come in contact with it in the event of an accident or collision. When mounting a mobile holder, ensure that the phone display is clearly visible for the user.
Installation 19 Use the ISO cable CA-135 or C A-152 When you connect the c ar kit to the car radio system with the ISO cable CA-135 or CA-152, you can select if the car kit amplifier is used for calls and the car radio amplifier is used for mu sic, or i f the car kit amplifier is used for both.
Installation 20 • Unplug the appropriate cables from the car radio, and insert the ISO cable plug instead. Connect the open ends of the cables to the car radio speakers. • Connect one of the wires labelled Mute 1, Mute 2, or Mute 3 on the car radio to the ISO cable.
Installation 21 input, the music and prompts played on these devices cannot be heard through the radio. 1. To connect the ISO cable to the car radio, do as follows: • Unplug the appropriate cables fr om the car radio, and insert the ISO cable plug instead.
Installation 22 pins on the fuses of the ISO cable. Plug the ISO cable to the two open ISO connectors. 2. Plug the ISO cable to the respective connector on the hands-free unit. 3. Connect the stereo outputs of the hands-free unit to the AUX input of the car radio.
Installation 23 through the radio; in that case, install the car kit using the ISO cable CA- 135 or CA-152. 1. Connect the respective wires of the power cable PCU-4 or CA-153P to the car battery and ignition sense (if available). Connect the car radio mute wire (if available) to the car radio.
Installation 24 ■ Install the car kit in a vehicle This section describes how to install the car kit parts in a vehicle. The parts are explained in “Parts,” p.
Installation 25 Hands-free unit HF-22 The hands-free unit has th e following connectors: 1. Connector for input device CU-11 2. Connector for charging cable CA-134 (to charge a compatible Nokia phone) 3. Connector for microphone MP-2 4. Mini-USB connector 5.
Installation 26 kit. For an optimal connection, ensu re that the distance between the hands-free unit and a metal surface is over 4 mm (0.16 inch). Install the hands-free unit in the ca r using suitable mounting material (not supplied in the sales package) .
Installation 27 Mount the microphone so that it is not exposed to air streams from the vents. Do not place the microphone cable in the heating, vent ilation, or air-conditioning system. Use the su pplied double-sided adhesive tape to fix the microphone t o reduce the amount of background noise of th e car that can interfere with your calls.
Installation 28 ■ Optional accessories You can extend the features of th e car kit with optional accessories. Consult your dealer or service techni cian for suitable accessori es for the car kit.
Care and maintenance 29 Care and maintenance Your device is a product of superior design and craftmanship and should be treated with care. The following suggestio ns will help you protect your warranty coverage.
Additional safety information 30 Additional safety information ■ Vehicles RF signals may affect improperly insta lled or inadequately shielded electronic systems in motor vehicles such as electr onic fuel injection sy stems, electronic antiskid (antilock) braking s ystems, electr onic speed control systems, and air bag systems.
An important point after buying a device Nokia CAR KIT CK-100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nokia CAR KIT CK-100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nokia CAR KIT CK-100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nokia CAR KIT CK-100 you will learn all the available features of the product, as well as information on its operation. The information that you get Nokia CAR KIT CK-100 will certainly help you make a decision on the purchase.
If you already are a holder of Nokia CAR KIT CK-100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nokia CAR KIT CK-100.
However, one of the most important roles played by the user manual is to help in solving problems with Nokia CAR KIT CK-100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nokia CAR KIT CK-100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
