Instruction/ maintenance manual of the product C6-00 Nokia
Go to page of 112
Nokia C6–00 Us er Guide Issue 2.2.
Contents Safety 5 About your device 5 Office applications 6 Network services 6 Shared memory 6 Magnets and magnetic fields 6 Find help 7 Support 7 In-device help 7 Accessibility solutions 7 Do more wi.
Messaging 39 Messaging main view 39 Write and send messa ges 40 Messaging inbox 40 View messages on a SIM card 41 Cell broadcast messages 41 Service commands 42 Messaging settings 42 Nokia Messaging 4.
Videos 81 Download and p lay a video 82 Video feeds 82 My videos 83 Transfer videos from your PC 83 Videos & TV settings 83 Personaliz e your device 8 4 Change the look of your device 84 Profiles .
Safety Read these simple guidelines. Not following them ma y be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SA FELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger.
third-party sites through your device. Third-party sites are not a ffiliated with Nokia, and Nokia does no t endorse or assume liabili ty for them. If yo u choose to access such site s, you should take precautions for security or content. Warning: To use any features in this device, other than the alarm clock, the device mus t be switched on.
Find help For local services and warranty information, please refer to the separate booklet. Support When you want to lea rn more about how to use your product or you are unsure how your device should function, see the support pages at www.n okia.com/ support or your local Nokia website, www.
www.nokia.com/support or your local Nokia website. Update device software About software update s Software updates may include new features and enhanced functions that were not available at the time of purchase of your device. Updating the software may also improve the device performance.
preset code is 12345. You can create and change the code, and set th e device to request the code. Keep the new code secret and in a safe place sep arate from your device. If you forget the code and your device is locked, your device will require service.
power. You can prevent the automat ic download of n ew maps. • If the signal strength of the cellular network varies much in your area , your device must scan for the available network repeatedly. This increases the deman d on battery power. If the network mode is set to dual mode in the network settings, the device searches for the 3G network.
Get started Keys and parts (front) 1 Proximity sensor 2 Earpiec e 3 Touch screen 4 Call key 5 Menu key 6 Light sensor 7 Secondary camera 8 End/Power key Do not cover the ar ea above the touch screen, for example, with protective film or tape. Keys and parts (top) 1 Nokia AV connector (3.
Note: The surface of this device does not contain nickel in the platings. The surface of this device contains stainless st eel. Insert the S IM card and batt ery Follow the instructions carefully, to avoid damaging the back cover. Always switch the device off and disconnect the charger before removing the battery.
Insert the me mory card A memory card may be already inserted in the device. If not, do the following: 1 Open the memory card slot cover. 2 Insert a compatible memory card in the slot. Ensure that th e contact area on the card is facing down and towards the slot.
2 If prompted, enter a PIN code (provided by your network service provider, for example, 1234) or lock code, an d selec t OK . The preset lock code is 12345. If you forget the code and your device is locked, your device will require service and additional charges may apply.
• Files in a file list, for example, an image in the Captured folder in the Photos application. Tip: When you open a list view, the first item is already highlighted. To open the highligh ted item, tap it once. If you tap a file or similar item once, it is not opened, but becomes highlighted.
In some list views, you can scroll your finger on a list item and drag up or down. Tip: To view a brief description of icons and buttons, place your finger on the icon or button. Descriptions are not available for all icons and buttons. Touch screen backlight The touch screen backlight is turned off after a period of inactivity.
4 Ctrl key. Some shortcuts require the ctrl key. 5 Space key 6 Shift key 7 Enter key 8 Navi™ key (scroll key). Press the scroll key to make a selection. Press the edges of the scroll key to scroll left, right, up, or down on the display. Press and hold the edge of the scroll key to accelerate scrolling.
Guiding line — S h o w o r h i d e t h e g u i d i n g line in the writing area. The guiding line helps you write in a straight line, and it also helps the dev ice recognize your writing. This option ma y not be available in all languages. Pen trail width — Change th e thickness of the text.
Warning: When you use the headset, your ability to hear outside sounds may be affected. Do not use the headset where it can endanger your safety. Do not connect products that create an output signal as this may cause dama ge to the device. Do not connect any voltage source to the Nokia AV Connector.
Some earlier Nokia devices may not have the Switch application. In this case, the Switch application is sent to the other device as a mess age. To install the Switch application on the other device, open the message, and follow the instruction s on t he display.
Interactive h ome screen elem ents To open the clock application, tap the clock ( 1). To open the calendar or change profiles in the home screen, tap the date or the profile name (2).
In the home screen, select Options > Edit content > Options > Add content > Share online . You need to register to the service before you can receive a feed. The widget displays thumbnail images from the feed. The latest imag es are displayed first.
Connectivi ty indicato rs Bluetooth is active. indicates that your device is sending data. If the indicator is blinking, your device is trying to connect to another device. You have co nnected a USB cable to your device. GPS is active. The device is synchronizing.
To change the country or region settin g to find more search providers, select Option s > Settings > Country or region . Search settings Select Menu > Applicat ions > Search .
offline profile. Remember to comply with any applicable safety requirements when establishing and usin g WLAN or Bluetooth connections. Fast downlo ading High-speed downlink packet access (HSDPA, also called 3.5G, indicated by ) is a network service in UMTS networks and provides high-s peed data downloads.
regions. In this case, enter the international acce ss code directly. 2 T o make the call, press the call key. 3 T o end the call (or to cancel the call attempt), p ress the end key . Pressing the end key always ends a call, even if another application is active.
If you do not want to answer a call, to reject the call, press th e end key. If the call divert feature (network service) is activated, rejecting an incoming call also diverts the call.
Swap between an ac tive call and a call on hold Select Options > Swap . Connect th e call on hol d to the active call Select Options > Transfer . You disconnect yourself from the calls. End an active call Press the end key. End both calls Select Options > End all calls .
client. Video calls cannot be made while another voice, video, or data call is active. Indicators You are not receiving video (the recipient is not sending video or the network is not tra nsmitting it).
Answer a video call Press the call key. To start sending live video, select Yes . If you do not start sending video, you only hear the voice of the caller. A gray screen replaces your own video. Start sending video during a vi deo call Select Options > Enable > Sending video .
3 Select Optio ns > Edit . 4 Select Options > Add detail > Share video . 5 Enter the SIP address in the format username@domainname (you can use an IP address instead of a domain name).
Accept the received invitatio n Select Yes . The sharing session is activated. Reject the received inv itation Select No . The sender receives a message that you rejected the invitation. You can also press th e end key to reject the invitation and end the voice call.
Log The log stores information about the communication history of the device. The device registers missed and received calls only if the network supports these functions, the device is switched on, and within the network service area. Recent calls You can view information about your recent calls.
Copy a phone numb er from the log Select Options > Us e number > Copy . You can, for example, paste the phone number to a text message. Filter the l og Select Options > Filter and a filter. Define the log duration Select Options > Settings > Log duration .
• Very short names are not a ccepted. Use long names, and avoid similar names for different numbers. Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumst ances.
To define a call text for a contact, select the contact and Op tions > Edit > Option s > Add detai l > Call alert text . Tap the text field to enter the call text, and select Done . To add an image for a contact saved in th e device memory, select the contact, Option s > Edit > Add image , and an image from Photos.
You need your PIN2 code to activate a nd deactivate fixed dialing or edit your fixed dialing contacts. Contact your service provider for your PIN2 code. Select Options and from the following: Activate fixed diali ng or Deactivate fixed dialing — Activate or deactivat e fixed dialling.
1 Your current mailbox. 2 Switch between your mailboxes, and view e-mails in different folders. 3 Sort your e-mail by , for example, date. 4 E-mail in current mailbox. Email contains interactive elements. Select and hold, for ex ample, an e-mail to view a pop-up menu.
enter an e-mail address manually, select the To, Cc, or Bcc field. 3 To add an attachment to the e-mail, select . 4 To send the e-mail, select . Mail for Excha nge With Mail for Exchange, you can receive your work e-mail to your device.
Delivery reports — Reque st the network to send you a delivery report of the text messages and multimedia messages you have sent (net work service). Write and send messages Select Menu > Messaging . Messaging is a network service. Important: Exercise caution when opening messages.
Open a message in the Inbox folder Select the message . Reply to a receiv ed message Select Options > Reply . Multimedia messages Select Menu > Messag ing . Important: Exercise caution when opening messages. Messages may contain malicious software or othe rwise be harmful to your device or PC.
For available topics and relevant topic numbers, contact your service provider. This service may not be available for all regions. Cell broadcast messages cannot be re c ei v ed in 3 G n et w or k s. A p a ck et d at a connection may prevent cell broadcast reception.
receive a notification that there is a message to retrieve in th e multimedia message center. I f you select Always automatic , your device automatically makes an active GPRS con nection to retrieve the message both in and outside your home network.
Nokia Messaging About Nokia Messaging The Nokia Messaging service automatically transfers mail from your existing mail address to your device. You can read, respond t o, and organize your mail on the go. To set up your mail account on your device, select Menu > Email and New , and follow the instructions.
Operato r selectio n — Select Automati c to set the device to search for and select one of the available networks, or Manual to manually select the network from a list. If the connection to the manually selected ne twork is lost, the device sounds an error tone and asks you to reselect a network.
If you select a secured WLAN, you are asked to enter the relevant password. To connect to a hidden network, you must enter the corr ect network name (service set identifier, SSID). If you already have the web browser running using the currently active Wi-Fi/ WLAN connection , to return to the web browser, select Continue web browsing .
1 Select Access point . 2 The device asks you to check for available connections. After the search, connection s that are already available are shown and can be shared by a new access point . If you skip this step, you are asked to select a connection method and to define the settings needed.
Authenti cation — To always send your password encrypted, select Secure . T o send your password encrypted when possible, select Normal . Homepage — Depending on the access point you are setting up, enter the web address or the addres s of the multimedia message center.
Close a connection Select Options > Disconnect . Close all op en connection s Select Options > Disconnect all . View the details of a connection Select Options > Details .
When the device is locked, only connections to authorized devices are possible. Features using Bluetooth tech nology increase the demand on battery power and reduce the battery life. Bluetooth sett ings Select Menu > Sett ings and Connectiv ity > Bluetooth .
devices quicker. Before pairing, create your own passcode (1 to 16 digits), and agree with the owner of the other device to use the same code. Devices that do not have a user interface ha ve a factory-set passcode. The passcode is used only once. Select Menu > Settings and Connecti vity > Bluetooth .
Activate remote SIM mode 1 A ctivate Bluetooth connectivity. Select Bluetooth . 2 A ctivate remote SIM mode in your device. Select Remote SIM mod e . 3 Activate remo te SIM mode in the other devic e. When remote SIM mode is activated, Remote SIM m ode is displayed in the home screen.
Open a GPRS connection only when needed Select Packet data connection > When needed . Every time you, for example, send an e- mail, the connection needs to be opened first. Use HSDPA (netw ork service) i n UMTS networ ks Select High speed packet access .
Block or allow the automatic openin g of multiple windows Select Options > We b page options > Block pop-ups or Allow pop-ups . Zoom into and o ut of a web page To zoom in, double-tap the display.
Subscribe to a web fe ed when a feed is available on the page Select Options > Subscribe to web feeds . Update a web feed In the Web feeds view, select a feed and Option s > Web fe ed options > Refresh . Set automati c update fo r all web feeds In the Web feeds view, select Optio ns > Edit > Edi t .
Connection securit y With a secure connection and security certificates, you can safely browse the internet. If the security indicator ( ) is disp layed during a connec tion, the data transmission bet ween the device and the internet gateway or server is encrypted.
another encoding according to the language for th e current page. Block pop-ups — Allow or block automatic opening of pop-up windows while browsing. Automatic reload — Se t web pages to be refreshed automatically wh ile browsing. Font size — Define the font size that is used for web pages.
the coordinates of your current location when your device is receiving signals from satellites. Your device is preconfigured to use the Nokia A-GPS service, if no service provider- specific A-GPS settings are available. The assistance data is re trieved from the Nokia A-GPS service server only when needed.
Ensure you do not cover the antenna with your hand. Establishing a GPS connection ma y take from a couple of seconds to se veral minutes. Establishing a GPS connection in a vehicle may take longer. The GPS receiver draw s its power from the device battery.
Set your destination Select Options > Set destination and a landmark as the destin ation, or enter th e latitude and longitude coordinates. Clear the destinati on Select Stop n avigation Retrieve p osition inf ormation You can view the position information of your current loca tion and an estimate of the accuracy of the location.
Define nota tion settings Select the me asurement sys tem to use for speeds and distances Select Measurement sy stem > Metric or Imperial . Define in which format the coo rdinate information is displayed in your device Select Coordinate fo rmat and the desired format.
The Global Positioning System (GPS) is operated by the gove rnment of the United States, which is solely responsible for its accuracy and mainte nance.
Navigatio n view 1 Route 2 Your location and direction 3 Compa ss 4 Information bar (speed, distance, time) Map view 1 Selected location 2 Indicator area 3 Point of interest (for example, a railway station or a museum) 4 Information area Plan a route Plan your journey, and create your route and view it on the map before setting off.
1 I n the route planner view, open the Settings tab. To get to th e route planner view from the navigation view, select Options > Route pts. or Route point list .
Change views during navigation Swipe the screen to select 2D view , 3D view , Arrow view , or Route ove rview . Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.
3 T ap the location's information area ( ). 4 S elect Save place . Save a route 1 S elect My position . 2 T ap the location. To search for an address or place, select Search . 3 T ap the location's information area ( ). 4 T o add another route point, select Add to route .
or Show or hide the viewfinder grid (images only). Activate the self-time r (images only). Activate sequ ence mode (images only). Open . Photos Image settings: Select a color effect. Adjust the white balance. Select the current lighting cond itions. This allows the camera to reproduce colors more accurately.
Leave the ca mera open in th e background and use other applications Press the menu key. To return to the camera, press and ho ld the capture key. On-screen controls and indicators for still image capture The still image viewfinder displays the following: 1 Capture mode indicator 2 Zoom slider.
Files with location information are indicated with in the Photos application. After capturing an image After you capture an image, select from the following options (available only if you have selecte.
Set the came ra to captur e images in a sequence 1 S elect > Sequence . To close the settings view, se lect . 2 Press and hold the capture key. The device captures images until you select Stop , or until 18 images have been ca ptured. Deactivate sequence mode Select > Single shot .
length indicator also shows the elapsed and remaining tim e. 10 The location to which the video is saved 11 GPS signal indicator After recording a video clip After you record a video clip, select from.
Photos About Phot os With Photos, you can view i mages and videos you have captured and recorded, downloaded from the web, received in a multimedia or e-mail message, saved on a memory card, or copied to your device memory from a memory card or other sources.
to view a received image or video clip in Photos, you must first save it. View and edit file details Select Menu > Photos . To view and edit the proper ties of an image or a video clip, select the file, Option s > Details , and from the following: Name — View the current file name.
Add an image or a video to an album Select the item and Options > Add to album . A list of albums opens. Select the album to which you want to add the image or video clip. The item you added to the album is still visible in Photos. Remove an image or a video from an album Select the album and the item, an d Option s > Remove from album .
Crop images Select Menu > Photos . Crop an image Select Options > Add effect > ( Crop ). Crop an image manually Select Manual . A cross is displayed in the upper left and lower right corner of the image. To adjust the crop borders, drag the crosses from the corners.
Change the layo ut of the prev iew Browse through the available layouts for the selected printer. If the images do not fit on a single page, swipe up or down to display the additional pages. Select the pape r size Select Options > Print settings > Paper size .
Modify the to ne of the music pl ayback Select Options > Equalizer . Modify the ba lance and ste reo image, or enhance the bass Select Options > Settings . Return to the ho me screen, and leave the player playing i n the background Press the end key.
Synchronize music with Windows Media Player Connect a compatible USB data cable, and select Media transfer as the connection mode. A compatible memory card must be inserted in the device.
Define a podcast search service web address To use the search service, you need to define a podcast search service web address. Select Options > Settings > Connection > Search s ervice URL . Search fo r podcast s Select Search , and enter the desired keywords.
View a list of subscribed podcasts Select Podcasts . View individual ep isode titles Select the podcast title. An episode is a particular media file of a podcast. Start a download Select the episode title. You can download multiple episodes at the same time.
Download settings Select Options > Settings > Download and from the following: Save to — Define where to save podcas ts. Update inte rval — Define how often podcasts are updated. Next upda te time — Define the time of the next automatic update.
Downloading videos may involve the transmission of larg e amounts of data through your service provider's network. Contact your service provider for information about data transmission charges. Your device may have predefined services. Service providers may provide free content or charge a fee.
Add feed — Subscribe to new feeds. To select a feed from the services in the video directory, select Via Video directory . Refresh feed s — Refresh the content of all feeds. Manage account — Manage your account options for a particular feed, if available.
Personalize your device You can personalize your device by changing the s tandby mode, main menu, tones, themes, or font size. Most of the personalization option s, such as changing the font size, can be accessed through the device settings. Change the look of your device Select Menu > Sett ings and Themes .
screen, select Menu > Settings and Themes > Wallpaper . To change the clock shown in the home screen, tap the clock in the home screen, and select Opt ions > Settings > Clock type . Modify the ma in menu In the menu yo u can access the functions in your device.
2 Fill in all the fields. Selec t a field to enter the text. To cl ose the text input dialog, se lect Done . To add a description to an entry, select Options > Add description . 3 S elect Done . Available options may vary. Mute or stop a calendar alarm Select Silence or Stop .
Change the alarm tone Select Options > Settings > Clock alarm tone . World clock With the world clock, you can view the current time in different locations. Select Menu > Appl ications > Clock . View the time Select World clock . Add locations to th e list Select Options > Add location .
correct settings, contact your service provider. 3 T o edit the advanced settings, select Options > Settings > Streaming > Network > Options > Advanced settings . 4 To select the bandwidt h used for a network type, select the network type and the des ired value .
Find and organize files Select Menu > Appl ications > Office > File mgr. . Search for a file Select Options > Find . Enter search text that matches the file name. Move and copy f iles and folders Select Options > Organize and the desired option.
• Quickpoint for viewing Microsoft PowerPoint presentations • Quickmanager for purchasing software If you have the editor version of Quickoffice, you can also edit files. Not all file formats or features are supported. Converter With Converter, you can convert mea sures from one unit to another.
With Zip manager, you can crea te new archive files to store compressed ZIP formatted files; add single or multiple compressed files or dire ctories to an archive; set, clear, or change the archive password for protected archives; and change settings, such as the level of compression used.
Date — Enter the current date. Date format — Select the date format. Date separa tor — Select the symbol that separates days, m onths, and years. Time format — S elect the time format. Time sepa rator — Select the symbol that separates hours an d minutes.
Display settings Select Menu > Settings and Phone > Display . Select from the following: Light sen sor — Adjust the light sens or sensitivity of your de vice. The light sensor turns the lights on when th e lighting of your location is dim and off when it is bright.
to Beep on ce or Silent , automatic answer is disabled. Lights — Set the lig hts to remain o n after the time-out. The available settings depend on the type of accessory. Applicatio n settings Select Menu > Sett ings and Phone > Application se tt.
cards that are recognized as the owner’s cards. Remote phone locking — Enable or disable remote lock. Closed us er group — Sp ecify a group of people to whom you can call and who can call you (network service). Confirm SIM services — Set the device to ask for confirmation when you are using a SIM card service (network service).
Manage digital rights licenses. Select Menu > Sett ings > Phone > Phone mgmt. > Security settings > Protected c ontent . Digital rights management Content owners may use different types of digital rights managemen t (DRM) technologies to protect their intellectual property, includin g copyrights.
Only install software that is compatible with your device. Install applicat ions You can transfer installation files to your device from a compatible computer, download th em during browsing , or receive them in a multimedia message, as an e-mail attachment, or using other connectivity methods, such a s Bluetooth connectivity.
To see which software packages are installed or removed and when, select Option s > View log . Important: Your device can only support one antivirus appli cation. Having more than one application wi th antivirus functionality could affect performance and operation or cause the device to stop functioning.
Internet call waiting — Set your device to notify you of a new incoming in ternet call while you are in a call. Internet call alert — To set your device to alert for incoming internet calls , select On . If you select Off , you receive only a notification if you missed a call.
Select Menu > Sett ings and Calling > Call restriction . When security features that restrict calls are in use (such as call barring, closed user group, and fixed di aling), calls may be possible to the official emergency number programmed into your device.
Q: Why can’t I end a Bluetooth connection? A: If another device is connected to your device, you can close the connection from the other device or deactivate Bluet ooth connectivity in your device. Select Menu > Settings and Connectivity > Bluetoot h > Blueto oth > Off .
network connections related to multimedia messaging. To set the device to use a GPRS connection only if you start an application or action that needs it, sele ct Menu > Settin gs and Connectiv ity > Admin. settings > Packet data > Packet data connection > When needed .
Product and safety information Accessories Warning: Use only batter ies, chargers, and accesso ries approved by Nokia for use with this particular model.
2 When you angle the hologram left, right, down and up, you should see 1, 2, 3 and 4 dots on each side respectively. Success ful com pletio n of the s teps is not a to tal assur ance of the authenticity of the battery.
Implanted medical devices Manufacturers of medica l devices recommend a mini mum separation of 15.3 centimeters (6 inches) between a wireless device and an implanted medical device, such as a pacemaker or implanted cardioverte r defibrillator , to avoid po tential interf erence with the medica l device.
• Insert a SI M card if your devic e uses one. • Remove certain call restrict ions you have activated in yo ur device. • Change your p rofile from of fline profile mo de to an activ e profile . • If the screen and keys are locked, sli de the lock switch on t he side of the d evice to unlock t hem.
OR ANY SPECIAL, INCIDENTAL, CONSEQU ENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED. The third- party applicati ons provided with y our device may have be en create d and may be owned by perso ns or ent ities not affiliated with or related to Nokia. Nokia does not own the copyrights or int ellectual property rig hts to the third- party applications.
Index Symbols/Numb ers 3-D ringing to nes 84 A A-GPS (assisted GPS) 57 Access codes 8 access points 46, 47 accessories 93 Active notes 91 alarm clock 86 albums, media 73 answering calls 26 antennas 13.
contacts 34, 35, 36 — adding 34 — copying 36 — defaults 35 — editing 34 — favorites 21 — groups 37 — managing 34 — ringing tones 35 — saving 34 — searching 27 — synchronizing 49 .
J Java applications 96 K keyboard 16 keypad lock 18 keys and parts 11 L landmarks 59 language set tings 92 licenses 95 location information 57, 60 lock code 8, 13 lock switch 18 locking — remotel y .
Photos 72, 73 — albums 73 — organizing fi les 73 — tags 74 — toolbar 73 PIN code 8, 13 PIN2 code 8 podcasting 76, 77, 78, 79, 80 positioning information 5 7, 60 powering device on/off 13 prese.
slide settings 93 slide show 74 SMS (short message service) 40 software applications 96 software updates 8 songs 76 speakerphone 24 Speech 92 support resources 7 switching device on/off 13 synchroniza.
An important point after buying a device Nokia C6-00 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nokia C6-00 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nokia C6-00 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nokia C6-00 you will learn all the available features of the product, as well as information on its operation. The information that you get Nokia C6-00 will certainly help you make a decision on the purchase.
If you already are a holder of Nokia C6-00, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nokia C6-00.
However, one of the most important roles played by the user manual is to help in solving problems with Nokia C6-00. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nokia C6-00 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
