Instruction/ maintenance manual of the product AD-5B Nokia
Go to page of 16
User Guide for the Nokia Wireless Audio Adapter AD-5B 9 31072 5 Issue 1 AD-5B_En_1st_tab.fm Page 1 Friday, April 9, 2004 2:57 PM.
2 DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the product AD-5B is in conf ormity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found from http://www .
Contents 3 English Contents 1. Introduction ................... .................................. .................. 4 2. Getting started ........ ......................................... .................. 6 Overview................................
Introduction 4 1. Introduction The Nokia Wireless Audio Adapte r AD-5B enables the use of headsets with Bluetooth techno logy with Nokia phones that have a Pop-P ort™ connector but do not offer integrated Bluetooth functionality . This gives you more freedom for making and receiving calls while on the move or at the office.
Introduction 5 English The Nokia Wireless Audio Adapter sales package includes the adapter and the user’s guide. No te that the Bluetooth passkey , which you need when using the ad apter with the headset, is in the card provided in the head set’s sales package.
Getting started 6 2. Getting started ■ Overview The Nokia Wireless Audio Adapter contains the following parts: 1 - Control key: Switches the adapter on and off. The control key also changes modes in the adapter . 2 - Indicator light: Displays the current status of the adapter .
Getting started 7 English ■ Using the adapter for the first time Before you can use the Wireless Audio Adapter , you need to associate, "pair", it with the headset you want to use. The compatible headset must support Bluetooth Specification 1.
Getting started 8 P airing the device Switch on the headset power be fore you start to pair your headset with the Nokia Wireless Audio Adapter . Make sure no other headsets or other compat ible audio devices are active within a 1 0 metre range. 1. Check the headset user guide to familiarise yourself with how to pair your headset .
Getting started 9 English The headset whose passkey yo u enter first becomes the default device for the Wireless Audio Adapter . The Wireless Audio Adapter an d the headset are now ready to be used. Note that all audios, includin g the call alert tones, are now routed to the headset.
Getting started 10 ■ Resetting headsets Reset clears all pairing and user data information. To reset the adapter , press and hold the Control key for 10 seconds. The reset is confirmed with an alternating red and green blink for another 1 0 seconds.
Getting started 11 English • Fas t g re en bl i nk (on for 0.2 seconds, off for 0.8 seconds) The adapter is either in Inquiry mode , which means that the adapter is searching for a headset with Bluetooth technology . If a headset is found, the adapter switches itself to P airing mode.
Getting started 12 • Alternating red and green blink for 10 seconds (on for 0.5 seconds, off for 0.8 seconds) The adapter is in the Reset mode . When the reset has been successful, the light indicator blinks red. • No indication from the light indicator The adapter is in Po w e r sa v i n g mode , which means that it is switched off.
Getting started 13 English ■ Accidental disconnection of the wireless audio adapter If, during a call, the adapter is accidentally disconnected from the Pop-P ort connector or the headset battery runs flat, the call is transferred to the phone and is continued normally .
Getting started 14 • Y ou should not use the Sile nt profile in your phone, because then you are not able to hear the ringing tone and you might not notice the call .
Care and maintenance 15 English Care and maintenance Y our device is a product of su perior design and craftsmanship and should be treated with ca re. The suggestions below will help you to fulfil any warranty obligations and to enjoy this product for many years.
16 AD-5B_En_1st_tab.fm Page 16 Friday, April 9, 2004 2:57 PM.
An important point after buying a device Nokia AD-5B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nokia AD-5B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nokia AD-5B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nokia AD-5B you will learn all the available features of the product, as well as information on its operation. The information that you get Nokia AD-5B will certainly help you make a decision on the purchase.
If you already are a holder of Nokia AD-5B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nokia AD-5B.
However, one of the most important roles played by the user manual is to help in solving problems with Nokia AD-5B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nokia AD-5B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
