Instruction/ maintenance manual of the product 9450 S Nokia
Go to page of 28
Owne r' s Manual MEDIAMASTER 9450 S.
GB 2.
GB 3 Contents FOR YOUR SAFETY 4 Rear panel 4 Front panel 5 INSTALLATION OF THE MEDIAMASTER 5 Connecting the Mediamaster to the satellite dish 6 Connecting the Mediamaster to a TV set 6 Connecting to a.
GB 4 Keep a clear space around the Mediamaster to allow for sufficient ventilation. Do not cover the Mediamaster or place it on a unit that emits heat. Use a soft cloth and a mild solution of dish washing liquid to clean the casing. Never allow liquids, spray or other materials to come into contact with the inside of the Mediamaster.
GB 5 The box for your Mediamaster should contain the following items: Mediamaster 9450S includes About the SCART sockets The rear panel of the Mediamaster is equipped with 2 SCART sockets . When you connect other products to any of these sockets, always use fully featured SCART cables (as supplied).
GB 6 Installing the satellite dish Your satellite dish should be installed with a cable for you to connect to t he Mediamaster. If you do not have this cable you will need to buy one from a dealer (tell the dealer you need a coaxial cable and F-connectors).
GB 7 Refer to your video recorder manual for full instructions. Connect one SCART cable between the main SCART socket on the TV and the TV SCART socket on the Mediamaster. Connect another SCART cable between the VCR and the AUX SCART socket on the Mediamaster.
GB 8 Connect an RCA/Cinch stereo cable from the AUDIO L R sockets on the Mediamaster to the LINE, AUX, SPARE or EXTRA input sockets on your Hi Fi system.
GB 9 This section describes how to operate the Mediamaster using the buttons on the remote control. Some of the functions can also be carried out using the buttons on the front panel. Switch the Mediamaster in and out of standby mode. EXIT TV Return to the viewing mode from a menu without storing settings (in menu mode).
GB 10 Once you have correctly connected the Mediamaster, you also have to perform some Basic Settings . During this procedure, helpful information is displayed at the bottom of the menus. Please note! The OK button always confirms a selection within these menus, and pressing it will take you to the next step in the installation process.
GB 1 1 To install the Mediamaster properly you have to adjust a few settings. You will always be guided by the information at the bottom of the menus. When you have finished the final part of the setup procedure you can start watching TV channels and listening to radio channels.
GB 12 Satellite name: From here you can select a name for the configuration. Switch Type: There are in principle two kinds of external DiSEqC switches on the market at present. One for connection of two LNBs. The other one for connection of up to 4 LNBs.
GB 13 You can use manual channel search if you want to add new channels later. For example If you have a special antenna configuration which is not assigned in the Antenna alternative menu, you can add new channels using the manual channel search function.
GB 14 If you have a TV set with a 4:3 picture format, and the transmission is in 16:9, you can select 4:3 (Pan & Scan) or 4:3 (Letterbox) to change display format. 4:3 (Pan & Scan) will fill up the screen vertically, but cut off some information from the left and right sides of the picture.
GB 15 By pressing the GUIDE button you obtain access to the TV Guide which gives the titles of the current programmes on the different channels. By pressing the LEFT or RIGHT button you also can also obtain information about the next programme. The minimized viewing window also helps you to select channels and information.
GB 16 While listening to radio Programmes you can see a programme list on the screen by pressing the OK button. You can change to another channel by pressing the UP/DOWN buttons and then pressing the OK button. To move faster (8 at the time) between the channels you can also use the DOUBLE ARROW buttons.
GB 17 TV/Radio Channels will show a list with the names of the different channels. To move faster within the list, use the DOUBLE ARROW buttons. Press OK to enter a marked channel. These guides will give you an overview of programme information from the TV/Radio channels.
GB 18 If you have created several Favorite lists you can determine the sequence in which the lists will appear. To rearrange channels, select the list which you want to move using the OK button. Move the channels to the desired position using the UP/DOWN button and press OK.
GB 19 You can arrange the order of channels within your favorite lists. To rearrange channels, select the channel which you want to move using the OK button. Move the channels to the desired position using the UP/DOWN button and press OK. From here, when the All TV list is selected in the Edit Channels menu, you can remove channels.
GB 20 Change access code From here you can change the access code from the standard 1234. DO NOT FORGET IT! Without it you do not have access to any of the functions where the code is required! If you forget it, you have to contact an Authorized Nokia Service Center to get help.
GB 21 You can enjoy this On/Of f Timer for such a convenience as wake-up or automatic VCR recording. Mediamaster will be automatically switched-on and play specified channel for the specified time, and then switched-of f. You may specify up to 8 separate lists with turn-on time, date, duration, channel and occurrence options.
GB 22 Select this Menu from the line Installation in the Main Menu. The submenu will give you the opportunity to change the preferences performed during first time installation. You can also add features that were not included in the first installation.
GB 23 This will start the Installation procedure from the Welcome Menu . When you press OK in the Welcome Menu again, be aware of the fact, that all previous channels and settings will be erased! To exit the Reinstall menu without erasing any channels, press Back .
GB 24 AGC Acquisition Gain Control. BER : Bit Error Ratio. DiSEqC Digital satellite Equipment Control. The outdoor unit comprises the antenna, one or more LNBs polarizers and external components. DVB The Digital Video Broadcast group was created to establish a technical frame work for the introduction of digital video broadcasting systems.
GB 25 Problem Possible causes What to do The display on the front panel does not light up/is not lit. Mains lead is not connected. Check that the mains lead is plugged into the power socket. No sound or picture. The satellite dish is not pointing at the satellite.
GB 26 Transmission Standards DVB, MPEG 2 LNB/Tuner input Connector 2 x F-type (Loop Through) Input frequency 950-2150 MHz Max Current 500 mA max Supply Voltage 13 V/18 V DiSEqC 1.
GB 27 System Settings 1. TV Screen Format 2.Output Selection 3.UHF Channel Number 4.RF Modulator Type 5.Information Box Time out 6.Display Volume Indicator 7.Date Setting(dd/mm/yyyy) 8. Time Setting(hh:mm) 9.GMT Of fset 7.Game First Time Installation MENUS SCREEN STRUCTURE Welcome Menu Language Settings 1.
Nokia is a registered trademark of Nokia Corporation www.nokia.com KQX1A644Z 66 76967-1 1.
An important point after buying a device Nokia 9450 S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nokia 9450 S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nokia 9450 S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nokia 9450 S you will learn all the available features of the product, as well as information on its operation. The information that you get Nokia 9450 S will certainly help you make a decision on the purchase.
If you already are a holder of Nokia 9450 S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nokia 9450 S.
However, one of the most important roles played by the user manual is to help in solving problems with Nokia 9450 S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nokia 9450 S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
