Instruction/ maintenance manual of the product 211S Nokia
Go to page of 42
Geeignet für Premiere User Guide.
.
GB 3 Dear customer , Congratulations on your new NOKIA Mediamaster 211 S. Plug & play installation and the user -friendly menu NOKIA NaviBars make this digital receiver particu- larly powerful and easy to use.
GB 4.
GB 5 Connecting a TV and a VCR Quick guide Preparing the Remote Control See pages 13 and 14 if you want to connect to an analogue satellite receiver or to connect in any other way . •P lug in your Mediamaster . • The “Erstinstallation” (First time installation) menu is shown.
GB 6 Ti me adjustment The time is adjusted using the cursor up / cursor down buttons, ± half an hour at a time. Y ou can also change the minutes using the cursor left / cursor right . buttons. •P ress select to finish the first-time installation and to open the NaviBars.
GB 7 Contents Nokia, Nokia Connecting People and NaviBars are registered trademarks of Nokia Corporation. Other product names mentioned herein may be tradenames of their respective owners.
GB 8 Nokia Mediamaster software end-user license IMPORT ANT : READ CAREFULL Y BEFORE OR USING THE SOFTW ARE NOKIA CORPORA TION, NOKIA HOME COMMUNICA TIONS END-USER SOFTWARE AGREEMENT This Software Agr.
GB 9 r elated materials provided by Nokia. Y our end-user rights automatically and immediately terminate without notice from Nokia if Y ou fail to comply with any provision of this Agreement. In such an event, Y ou must immediately return at Y our own cost, this Nokia digital TV receiver , and all related material to the place of purchase.
GB 10 General information about the Mediamaster Throughout this manual you will notice that the everyday operation of your Mediamaster is based on a series of user friendly on-screen displays and menus.
GB 11 Remote control Press once to turn the sound off/on (mute). Press and hold for a few seconds to switch the Mediamaster in and out of stand-by mode. 0 - 9 Change the channel and select individual menu options. Note: If 0 is entered as the first digit, the TV Release func- tionality is activated (see below).
GB 12 * LNB cable also feeds the LNB with a supply voltage of 13/18 V (V/H polarisation) and a 0/22 kHz signal (bandswitch). Max LNB current is approximately 500 mA.
GB 13 About the smartcard and CI module CI module Smartcard CI module Smartcard General In order to receive scrambled digital channels, you will need a CI module * (Common Interface) and a smartcard, which can be ob- tained from a Service Provider . There are several different CI modules available on the European market.
GB 14 Installation of the Mediamaster SCART socket SCART cable Owner’ s manual Remote control 8 mm 15 mm 3 mm F-connector Mains cable The Mediamaster box should contain the following items: •t he Mediamaster •a remote control with 2 AAA batteries •a SCART cable (fully connected 1.
GB 15 Nokia smart switch SCART Connecting a TV and VCR Refer to your VCR’ s manual for full instructions. • Connect one SCART cable from the main SCAR T socket on the TV to the TV SCART socket on the Mediamaster . •C onnect another SCART cable from the VCR to the AUX SCART socket on the Mediamaster .
GB 16 Connecting a HiFi system • Connect an RCA stereo cable from the AUDIO L R sockets on the Mediamaster to the LINE, AUX, SP ARE or EXTRA input sockets on your HiFi system. • If available, you can connect a single RCA cable from the DIG- IT AL AUDIO socket on the Mediamaster to a HiFi system that is equipped with digital audio input.
GB 17 First time installation Language • Select the desired menu language using the cursor up / cursor down button. This will also become the main language for audio and subti- tling. •P ress select to continue. General information Once you have correctly connected the Mediamaster , you will also have to perform a “First-time installation.
GB 18 One antenna/one LNB configuration Select this alternative if you have one (1) LNB mounted on the antenna. •P ress opt to view the predefined channel. LNB type Select the correct LNB for your configuration. The most common values, including Universal LNB, can be selected using the cur - sor left / cursor right button.
GB 19 T ypical connection of a two-way DiSEqC switch: • Connect the cable from the LNB that is intended for channels from the ASTRA satellite (or THOR) to the connector marked LNB 1 (A) on the switch. • Connect the cable from the HOTBIRD satellite (or SIRIUS) to the connector marked LNB 2 (B).
GB 20 Motor antenna configuration If you have an antenna motor to control your satellite antenna you must configure the following settings. • From the “Antenna/Satellite selection” menu select option 3 “Motor Antenna Configuration” and press select .
GB 21 Channel search The Channel search procedure can be carried out in different ways. The menu will look different depending on what option you se- lected in the “Antenna/satellite selection” menu. If you selected “One antenna/one LNB configuration”, select “Automatic”, “Manual” or “Advanced Manual” search.
GB 22 Channel search in progress This menu will be shown while the Mediamaster is searching for TV and radio channels. All channels that are found will be listed on the screen. Please note that the search procedure may take a few minutes. Y ou can cancel the search at any time by pressing select .
GB 23 NaviBars General information •P ress select to open the NaviBars. The NaviBars is used for selecting TV/Radio channels and chang- ing system settings. See the figure to the right. The horizontal row contains folders , for example, All TV , Set- tings and so on.
GB 24 V isible Invisible Control folder ☛ User preferences Banner time-out When you switch channels, an information banner will be shown for a few seconds. Y ou can select the length of time that the banner will be shown. Vo lume bar Select whether or not you want the volume bar to appear on the screen when you change the volume.
GB 25 Important information about editing channels Before you start, you must select the list, TV or radio, that you want to edit. If you are watching TV and press select and choose Edit channels, you can only edit TV channels. If you are listening to radio channels you can only edit radio channels.
GB 26 Delete list If you want to delete a Favourite list, select the list using the cur - sor left / cursor right button and press select . Rename list Y ou can give an existing list a new name by following the instruc- tions in the “ How to give a specific name ” section on page 19.
GB 27 Control folder ☛ Edit satellites Y ou can add a new satellite to the system. Y ou can also edit or delete existing satellites. To add a new satellite • Select “Add Satellite”. • Enter the name of the new satellite. (Entering a name is de- scribed on page 25.
GB 28 •Y ou can adjust the dish using channel preview if PID informa- tion has been entered. •P ress select to start the channel search. • When you get the message on the screen that ”you have found X new TV -channels and X new radio channels”, press select to save the new channels.
GB 29 Control folder ☛ System info If you need to contact your service provider or a service centre, they may ask for information that is available from this menu. This gives general information about the hardware and software version on which your Mediamaster is running.
GB 30 Settings folder ☛ T V To open this menu, you will be asked to enter your access code. The access code is set to 1234 at the factory . Y ou can adjust the audio/video settings for your receiver . •P ress opt to view the TV picture on the screen.
GB 31 Settings folder ☛ Access To open this menu you will be asked to enter your access code. The access code is set to 1234 at the factory . The following settings can be altered from this menu. Access Control These are two different functions which normally require two different PIN-Codes.
GB 32 Settings folder ☛ Reinstall To open this menu you will be asked to enter your access code. The access code is set to 1234 at the factory . Use this option only if you have to start the complete installa- tion procedure from scratch.
GB 33 V iewing Mode General information The following describes the basic functions of your Mediamaster that can be used while watching satellite TV or listening to sat- ellite radio. Some of the functions described here are dependent on the Service Provider and can only be used if they are included in the transmitted programme information.
GB 34 Extended programme information The Mediamaster can display information about programmes that are currently being broadcasted as well as those that will be broadcast next. This procedure is the same for both TV and radio mode. By pressing info while watching TV the “Programme informa- tion” banner will appear .
GB 35 V iewing Mode Premiere specific functions Premiere offers special functions for some channels. Y ou can, for example, select between various camera perspectives or matches when you are watching sports programmes, such as Formula 1 Grand Prix or football league games (Multifeed).
GB 36 TV release (0) With the 0 button you can toggle between analogue terrestrial TV , video, and analogue and digital satellite TV signals. T eletext Pressing txt will open a teletext page (if teletext is transmitted on that channel.) Select teletext pages using the numeric buttons on the remote control.
GB 37 Glossary of terms AC-3 A multichannel digital audio encoding system. Access Access to options in the Settings folder is protected by an access code. In addition, parents may lock individual programmes using the channel editing function. Access code A four -digit code stored in the Mediamaster .
GB 38 Tr oubleshooting Problem The LED on the front panel does not light up/is not lit. The left-hand LED is red No sound or picture. No sound or picture on the horizon- tal modulated transponder . Bad picture/blocking error . There is no Welcome menu on the screen after you have switched the Mediamaster on for the first time.
GB 39 T ransmission standards DVB, MPEG 2 LNB / T uner input Connector 1x F-type (LNB) RF input frequency 950-2150 MHz RF input power level -20 to -65 dBm Supply voltage 13 /18 V ± 5% Max. current 500 mA, overload protected Control voltage 22 kHz, 0.
GB 40 Menu screen structure Motor antenna configuration Antenna/satellite selection Antenna User pref User preferenses Switch/antenna configuration Channel search Channel Edit channels Edit channels T.
.
Nokia is a registered trademark of Nokia Corporation www .nokia.com 00000318.01.
An important point after buying a device Nokia 211S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nokia 211S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nokia 211S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nokia 211S you will learn all the available features of the product, as well as information on its operation. The information that you get Nokia 211S will certainly help you make a decision on the purchase.
If you already are a holder of Nokia 211S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nokia 211S.
However, one of the most important roles played by the user manual is to help in solving problems with Nokia 211S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nokia 211S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
