Instruction/ maintenance manual of the product SPS-28 E Nilfisk-ALTO
Go to page of 28
Form No. 70100B 4/99 CLARKE TECHNOLOGY Printed in the U.S. A. READ THIS BOOK This book has important information for the use and safe operation of this machine.
Page 2 CLARKE TECHNOLOGY Model SPS-28 Space Sweeper Operator's Manual Table of Contents Operator Safety Instructions ................................................................................... 3 Operator Safety Instructions Battery Powered Machine .
CLARKE TECHNOLOGY Model SPS-28 Space Sweeper Operator's Manual Page 3 OPERATOR SAFETY INSTRUCTIONS DANGER means: Severe bodily injury or death can occur to you or other personnel if the DAN- GER statements found on your machine or in your Owner's Manual are ignored or are not adhered to.
Page 4 CLARKE TECHNOLOGY Model SPS-28 Space Sweeper Operator's Manual CAUTION: Connect or disconnect the battery plug only when the charger supply cord is disconnected or arcing and burning may result. CAUTION: D o not expose to rain. Replace defective cords immediately.
CLARKE TECHNOLOGY Model SPS-28 Space Sweeper Operator's Manual Page 5 INTRODUCTION The Model SPS-28 will effectively and efficiently sweep your floors at minimum cost, provided you operate this machine with reasonable care and maintain it in accordance with the intructions contained in this operator's manual.
Page 6 CLARKE TECHNOLOGY Model SPS-28 Space Sweeper Operator's Manual How to Prepare The Machine for Operation Model 28G (Gasoline Powered) NOTE: Do not attempt to operate the CLARKE Model SPS-28 before reading the instructions in this manual. WARNING: T o prevent injury , always wear protec- tive clothing.
CLARKE TECHNOLOGY Model SPS-28 Space Sweeper Operator's Manual Page 7 How to Prepare The Machine for Operation 1. Before starting the SPS-28B lift the battery box cover and make sure the battery cables are connected. 2. Place all controls in "NEUTRAL".
Page 8 CLARKE TECHNOLOGY Model SPS-28 Space Sweeper Operator's Manual HOW TO OPERATE THE MACHINE NOTE: Do not attempt to operate the CLARKE Model SPS-28 before reading the instructions in this manual. WARNING: To prevent injury , always wear protec- tive clothing.
CLARKE TECHNOLOGY Model SPS-28 Space Sweeper Operator's Manual Page 9 HOW TO OPERATE THE MACHINE (cont) How to Operate the Side Broom (Optional): 1.
Page 10 CLARKE TECHNOLOGY Model SPS-28 Space Sweeper Operator's Manual HOW TO OPERATE THE MACHINE (cont) How to Empty Debris Hopper: WARNING: T o prevent injury , always stop the en- gine or motor before you empty the hoppers or clean the filter.
CLARKE TECHNOLOGY Model SPS-28 Space Sweeper Operator's Manual Page 11 SPS-28 Space Sweeper (INCL UDES 28G & 28B) Section II Parts and Service Manual (70100B).
Page 12 CLARKE TECHNOLOGY Model SPS-28 Space Sweeper Operator's Manual SERVICE AND MAINTENANCE WARNING: Maintenance and repairs must be done by authorized personnel only. Keep Adjustments according to specifications. WARNING: T o prevent injury always stop the en- gine or motor before doing any mainte- nance or repairs to this machine.
CLARKE TECHNOLOGY Model SPS-28 Space Sweeper Operator's Manual Page 13 Drive Belts WARNING: T o prevent injury always stop the engine or motor before doing any maintenance or repairs to this ma- chine. The drive belts are automatically tensioned by a spring- loaded idler wheel.
Page 14 CLARKE TECHNOLOGY Model SPS-28 Space Sweeper Operator's Manual Installation of New Main Brush (cont) Remove the three screws and washers and the bristle strip retained by them. Install the new strip and assemble the retaining screws and washers.
CLARKE TECHNOLOGY Model SPS-28 Space Sweeper Operator's Manual Page 15 Cap acitor T est If a commercial capacitor checker is not available, the following test may be made: 1. Briefly short the capacitor terminals together with a screwdriver . 2. Disconnect a wire from either capacitor terminal.
Page 16 CLARKE TECHNOLOGY Model SPS-28 Space Sweeper Operator's Manual CLARKE TECHNOLOGY Model SPS-28 Main Frame, Brush Assembly and Drive System Drawing 1/99 87 86 95 28 42 77 75 76 74 4 5 6 24 .
CLARKE TECHNOLOGY Model SPS-28 Space Sweeper Operator's Manual Page 17 CLARKE TECHNOLOGY Model SPS-28 Main Frame, Brush Assembly and Drive System Parts Lists 1/99 Ref # Part No.
Page 18 CLARKE TECHNOLOGY Model SPS-28 Space Sweeper Operator's Manual CLARKE TECHNOLOGY Model SPS-28 Engine, Dust Control & Handle Assembly Drawing 4/99 34 11 31 41 42 26 11 27 39 37 38 37 3.
CLARKE TECHNOLOGY Model SPS-28 Space Sweeper Operator's Manual Page 19 CLARKE TECHNOLOGY Model SPS-28 Engine, Dust Control & Handle Assembly 4/99 Ref # Part No.
Page 20 CLARKE TECHNOLOGY Model SPS-28 Space Sweeper Operator's Manual CLARKE TECHNOLOGY Model SPS-28 Hopper and Optional Sidebroom Assembly Drawing 1/99 49 34 BOTTOM TO P 27 28 51 52 50 53 54 55.
CLARKE TECHNOLOGY Model SPS-28 Space Sweeper Operator's Manual Page 21 CLARKE TECHNOLOGY Model SPS-28 Hopper and Optional Sidebroom Assembly Parts List 1/99 Ref # Part No. Description Qty 1 60075A Hopper 1 2 798529 Support, Hopper T op 1 3 930090 Rivet, 5 / 32 Dia.
Page 22 CLARKE TECHNOLOGY Model SPS-28 Space Sweeper Operator's Manual CLARKE TECHNOLOGY Model SPS-28 Battery P owered Model Drawing 1/99 7 5 14 14 13 11 12 16 11 12 16 18 17 46 26 45 44 55 37 36.
CLARKE TECHNOLOGY Model SPS-28 Space Sweeper Operator's Manual Page 23 CLARKE TECHNOLOGY Model SPS-28 Battery P owered Model Drawing 1/99 Ref # Part No. Description Qty 1 60071A Co v er Assembly , Battery Access 1 2 962003 Screw , 6 / 32 x 3 / 8 Rd.
Page 24 CLARKE TECHNOLOGY Model SPS-28 Space Sweeper Operator's Manual CLARKE TECHNOLOGY Model SPS-28 Wiring Diagram & Electrical Schematic 1/99.
CLARKE TECHNOLOGY Model SPS-28 Space Sweeper Operator's Manual Page 25 CLARKE TECHNOLOGY Model SPS-28 Wiring Diagram 1/99 Ref # Part No. Description Qty 1 871376 Batter y , 95 amp Hr .
Page 26 CLARKE TECHNOLOGY Model SPS-28 Space Sweeper Operator's Manual NOTE S.
CLARKE TECHNOLOGY Model SPS-28 Space Sweeper Operator's Manual Page 27 AL T O ® PRODUCT SUPPORT BRANCHES PRODUCTION F A CILITIES AL T O Danmark A/S, Aalborg Blytaekkervej 2 DK-9000 Aalborg +45 72 18 21 00 AL T O Danmar k A/S, Hadsund Industrikvar teret DK-9560 Hadsund +45 72 18 21 00 SALES SUBSIDIARIES AL T O Canada Ltd.
CLARKE TECHNOLOGY LIMITED U.S. W ARRANTY This Clarke Industrial/Commercial Product is warranted to be free from defects in materials and workmanship under normal use and service for a period of one year from the date of purchase, when operated and maintained in accordance with Clarke's Maintenance and Operations instructions.
An important point after buying a device Nilfisk-ALTO SPS-28 E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nilfisk-ALTO SPS-28 E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nilfisk-ALTO SPS-28 E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nilfisk-ALTO SPS-28 E you will learn all the available features of the product, as well as information on its operation. The information that you get Nilfisk-ALTO SPS-28 E will certainly help you make a decision on the purchase.
If you already are a holder of Nilfisk-ALTO SPS-28 E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nilfisk-ALTO SPS-28 E.
However, one of the most important roles played by the user manual is to help in solving problems with Nilfisk-ALTO SPS-28 E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nilfisk-ALTO SPS-28 E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
