Instruction/ maintenance manual of the product EZ-8 Nilfisk-ALTO
Go to page of 12
Form No. 78425B 10/01 AMERICAN SANDERS TECHNOLOGY Printed in the U.S.A. READ THIS BOOK This book has important information for the use and safe operation of this machine.
Page 2 AMERICAN SANDERS TECHNOLOGY EZ - 8 Sander Operator's Manual Operator Safety Instructions ......................................................... 3 Introduction and Machine Specifications ....................................... 5 How to Transport the Machine .
AMERICAN SANDERS TECHNOLOGY EZ - 8 Sander Operator's Manual Page 3 DANGER means: Severe bodily injury or death can occur to you or other personnel if the DANGER statements found on this machine or in this Owner's Manual are ignored or are not adhered to.
Page 4 AMERICAN SANDERS TECHNOLOGY EZ - 8 Sander Operator's Manual DANGER: Electrocution or injury could occur if the power cord encounters the sanding drum.
AMERICAN SANDERS TECHNOLOGY EZ - 8 Sander Operator's Manual Page 5 Introduction & Machine Specifications Model 07057A 07058A 07059A 07060A Abrasive Size 8 in x 19 3 / 16 in 8 in x 19 in 8 in .
Page 6 AMERICAN SANDERS TECHNOLOGY EZ - 8 Sander Operator's Manual How to T ransport the Machine Transporting the Machine With Limited Cargo Area: To transport the machine, follow this procedure: 1. Lower sanding drum with control lever. See figure #1.
AMERICAN SANDERS TECHNOLOGY EZ - 8 Sander Operator's Manual Page 7 Machine Set-up To set up the machine follow this procedure: 1. Familiarize yourself with the machine. Read all danger, warning, and caution statements as well as the Operator's Manual.
Page 8 AMERICAN SANDERS TECHNOLOGY EZ - 8 Sander Operator's Manual How to Operate the Machine (cont.) CAUTION: T o prevent damage to the surface, make sure the machine is always moving when the sanding drum is in contact with the floor. 2. Work right to left.
AMERICAN SANDERS TECHNOLOGY EZ - 8 Sander Operator's Manual Page 9 945390/25 945391/25 945392/25 945930/10 945416/10 945395/25 945933/10 945418/10 945397/25 945398/25 945935/10 945420/10 945399/2.
Page 10 AMERICAN SANDERS TECHNOLOGY EZ - 8 Sander Operator's Manual Sander Adjustment Procedures DANGER: Electrocution could occur if main- tenance and repairs are performed on a unit that is not properly dis- connected from the power source. Disconnect the power supply be- fore attempting any maintenance or service.
AMERICAN SANDERS TECHNOLOGY EZ - 8 Sander Operator's Manual Page 11 Routine Maintenance The following items need to be periodically inspected and maintained to keep your sander in good working condition.
Page 12 AMERICAN SANDERS TECHNOLOGY EZ - 8 Sander Operator's Manual T roubleshooting Problem Cause Action Drive belts jump teeth or squeak. Damaged belt. Replace belt. Insufficient tension. Tension drive belt. Poor belt tracking. Align Pulley. Squealing, growling or grinding Damage and/or worn bearing.
An important point after buying a device Nilfisk-ALTO EZ-8 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nilfisk-ALTO EZ-8 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nilfisk-ALTO EZ-8 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nilfisk-ALTO EZ-8 you will learn all the available features of the product, as well as information on its operation. The information that you get Nilfisk-ALTO EZ-8 will certainly help you make a decision on the purchase.
If you already are a holder of Nilfisk-ALTO EZ-8, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nilfisk-ALTO EZ-8.
However, one of the most important roles played by the user manual is to help in solving problems with Nilfisk-ALTO EZ-8. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nilfisk-ALTO EZ-8 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
