Instruction/ maintenance manual of the product ATTIX 791-2M/B1 Nilfisk-ALTO
Go to page of 16
A T TIX 791-2M/B1 302001675 - 2008-05-19 Operating Instructions .......................................................... 1-13 Betriebsanleitung ................................................................ 14-26 Notice d’utilisation ...........
A TTIX 791-2M/B1 auto auto 2 3 4 1 6 6 8 10 13 7 7 9 11 12 5.
1 A TTIX 791-2M/B1 Contents 1 Important safety instructions 2 Description 3 Before start-up 4 Operation 5 Applications and techniques 6 After finishing work 7 Maintenance 8 T roubleshooting 9 Further information .......................................
2 A TTIX 791-2M/B1 1 Impor tant saf ety instructions Symbols used to mark instructions Before using the vacuum cleaner , alwa ys read the operating instruc- tions and keep them readily av ailable . This symbol is used to mark safety instruc- tions that must be observed to prev ent damage to the vacuum cleaner and its performance.
3 A TTIX 791-2M/B1 Precautions and safety regulations when using the vacuum c leaner Before start-up Inspect power cord regularly to detect signs of damage, e.g. cracks or ageing. If the power cord is damaged, it must be replaced by Nilfisk- Alto-Service or an electr ician to av oid danger bef ore use of the vacuum cleaner is continued.
4 A TTIX 791-2M/B1 Use the sock et on the vacuum cleaner for the purpose defined in the operating instructions only . Before plugging an appliance into the appliance sock et: 1. Switch off the vacuum clean- er 2. Switch off the appliance to be connected.
5 A TTIX 791-2M/B1 2.2 Operating elements See fold-out page at the front of these operating instructions. 1 Handle 2 Suction pipe suppor t 3 Accessory holder 4 Applicance switch with suction power con.
6 A TTIX 791-2M/B1 4.2 Switching on the vacuum c leaner 4.2.1 Switch position “I” 1. T urn the switch to position „I“. The vacuum cleaner motor star ts . 4.2.2 Switch position „auto“ Before switching the switch to position „auto“, ensure that the tool connected to the appliance socket is switched off.
7 A TTIX 791-2M/B1 4.4 Acoustic warning For saf ety reasons , an acoustic warning sounds if the air speed in the suction hose drops to be- low 20 m/s. See section “T rou- bleshooting”.
8 A TTIX 791-2M/B1 6 After finishing w ork 6.1 Switching the vacuum cleaner off and storage 1. After picking up hazardous dust, vacuum clean the out- side of the cleaner . 2. Switch off the vacuum clean- er and pull the mains plug out of the sock et. 3.
9 A TTIX 791-2M/B1 7.2.2 Replacing the waste bag 1. Remove the upper section of cleaner from the dir t tank. 2. Open the retaining clamps (1) and remov e the interme- diate ring (2) from the tank. 3. Close the waste bag using the cable binder (3). 4. Dispose of the dir t in accord- ance with legal regulations.
10 A TTIX 791-2M/B1 5 5 5 5 4 4 4 4 7.2.5 Replacing filter element During the follow- ing work, ensure that dust is not un- necessarily spread around. Wear a P2 (2). 3. Place the protective filter bag 1) ov er the filter element (3). 4. Carefully remo ve the filter element and close the pro- tective filter bag with a knot.
11 A TTIX 791-2M/B1 8 T roub leshooting Fault Cause Remedy ‡ Motor does not star t > Fuse of the mains sock et has blown. • Connect mains fuse. > Overload protection s witch has tripped. • Switch off the vacuum cleaner and allow it to cool f or appro x.
12 A TTIX 791-2M/B1 9.2 Guarantee Our general conditions of busi- ness are applicable with regard to the guarantee. Subject to change as a result of technical advances . 9.3 T ests and app rovals The vacuum cleaners hav e been tested as specified in IEC/EN 60335-2-69 including appendix AA.
13 A TTIX 791-2M/B1 EC declaration of conf ormity Alto Deutschland GmbH Guido-Oberdorfer-Straße 2-8 D-89287 Bellenberg Product: Model: Description: The design of the appliance corresponds to the following pertinent regulations: Applied harmonized standards: Applied national standards and technical specifications: Dipl.
KWWSZZZ QLO¿VNDOWRFRP HEADQUARTER DENMARK 1LO¿VN$GYDQFH*URXS 6RJQHYHM %U¡QGE 'HQPDUN 7 HO.
An important point after buying a device Nilfisk-ALTO ATTIX 791-2M/B1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nilfisk-ALTO ATTIX 791-2M/B1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nilfisk-ALTO ATTIX 791-2M/B1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nilfisk-ALTO ATTIX 791-2M/B1 you will learn all the available features of the product, as well as information on its operation. The information that you get Nilfisk-ALTO ATTIX 791-2M/B1 will certainly help you make a decision on the purchase.
If you already are a holder of Nilfisk-ALTO ATTIX 791-2M/B1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nilfisk-ALTO ATTIX 791-2M/B1.
However, one of the most important roles played by the user manual is to help in solving problems with Nilfisk-ALTO ATTIX 791-2M/B1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nilfisk-ALTO ATTIX 791-2M/B1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
