Instruction/ maintenance manual of the product E 130.2-9 X-TRA Nilfisk
Go to page of 19
Nil sk E 130.2 Nil sk E 140.2 Nil sk E 145.2 User Manual.
Cop yright © 2011 Nilfisk, Division of Nilfisk-Advance A/S.
3 Inde x 1 Saf ety precautions and warnings ............................................. 3 2 Description ............................................................................... 4 3 Bef ore you start using your pressure washer ................
4 Extension cables should be of a watertight constr uction and comply with the below-men- tioned requirements f or length and cable dimensions . 1.0 mm² max. 12.5 m 1.5 mm² max. 20 m 2.5 mm² max. 30 m Cable connections should be kept dry and off the ground.
5 2.2 Operation elements and model survey See illustration at the end of this manual. 1 Star t/stop switch 2 W ater inlet (with fi lter) 3 High pressure connection (only models without hose reel) 4 H.
6 3.3 Mounting of quick coupling 1. Screw the quic k coupling (16) tight on to the water inlet (2). Note: The inlet fi lter must al- wa ys be fi tted in the w ater inlet pipe to fi lter out sand, lime stone and other impurities as these will damage the pump valv es.
7 4.2 Mounting of spray lance and Click & Clean nozzles 2. Attach the nozzle. W arning: When attaching the Click & Clean nozzles, the pawl on the side of the spra y lance should come out again.
8 4.5 Star t and stop of the ma- chine (when connected to a water supply) The spra y lance is aff ected by a thrust during opera- tion - theref ore alwa ys hold it fi rmly with both hands. IMPOR- T ANT : P oint the nozzle at the ground. 1. Check that the machine is in upright position.
9 4.7 Pressure regulation on the T ORNADO ® PR- nozzle The pressure can be regulated on the TORNADO ® PR nozzle. 4.8 Stationary use If mounting a special wall hook (not standard), the pressure washer can be used as a sta- tionar y solution meaning that it can be operated while hanging on the wall.
10 5 Fields of application and w orking methods 5.1 General Effi cient high presure cleaning is achie v ed by f ollowing a fe w guide- lines, combined with y our own personal e xper ience of specifi c cleaning tasks. Accessories and detergents, when correctly cho- sen, can increase the effi ciency of y our pressure washer .
11 5.2 T ypical fi elds of application Below y ou will fi nd a description of a lot of cleaning tasks which can be solved b y a pressure washer from Nilfi sk in association with accessories and detergents.
12 6 After using y our pressure washer 6.2 Winding up of electric cable and high pressure hose carefully up . 1. Wind up the electric cable on the appropriate hooks. Built- in clip f or good holding (1). The low er hook can be turned to release the electr ic cable .
13 W ARNING! Alwa ys disconnect the electrical plug from the sock et prior to maintenance or cleaning. T o ensure a long and problem free working life , please tak e the f ollowing advice: Wash out w ater hose, high pressure hose, spra y lance and accessories before mounting.
14 8 T r ouble-shooting T o av oid unnecessary disappointments, you should chec k the f ollowing bef ore contacting the Nilfi sk ser vice organization: Symptom Cause Recommended action Machine refuses to start Machine not plugged in Plug in machine. Def ective soc k et T r y another sock et.
15 9 Fur ther inf ormation 9.1 Recycling the washer Make the old cleaner un usable immediately . 1. Unplug the cleaner and cut the electric cable. Do not discard electrical appli- ances with household waste .
16 9.3 Accessories Only use original accessor ies. Click & Clean Car nozzle Special nozzle f or enameled surf aces. Optimal distance: 30 - 50 cm. Click & Clean Undershassis nozzle 90° angled special nozzle f or undercarriage and wheel arches.
17 EU Declaration of Conf ormity Product: High Pressure W asher T ype: Nilfi sk E 130.2, E 140.2, E 145.2 Description: 230 V 1~, 50 Hz - IP X5 The design of the unit corre sponds to the f ollowing pe.
.
www .nil sk.c om.
An important point after buying a device Nilfisk E 130.2-9 X-TRA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nilfisk E 130.2-9 X-TRA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nilfisk E 130.2-9 X-TRA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nilfisk E 130.2-9 X-TRA you will learn all the available features of the product, as well as information on its operation. The information that you get Nilfisk E 130.2-9 X-TRA will certainly help you make a decision on the purchase.
If you already are a holder of Nilfisk E 130.2-9 X-TRA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nilfisk E 130.2-9 X-TRA.
However, one of the most important roles played by the user manual is to help in solving problems with Nilfisk E 130.2-9 X-TRA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nilfisk E 130.2-9 X-TRA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
